IFM efector 200 OGS38 Series User manual
Operating instructions
Through-beam sensor
OGE38x
OGS38x
7200011 / 00 11 / 2011
UK
UK
2
1 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2 Installation
►Install the receiver (OGE38x) and secure it to a bracket.
►Align the transmitter (OGS38x) to the receiver and secure it also to a bracket.
> Maximum range only with accurate alignment.
3 Electrical connection
►Disconnect power.
►Connect the unit as follows.
3.1 Transmitter
1
3
L+
L
pin 1 = L+ (10...30 V DC)
pin 3 = L-
(pin 4 = not connected)
(pin 2 = not connected)
3
UK
3 Receiver
PNP
L+
L
1
4
3
pin 1 = L+ (10...30 V DC)
pin 3 = L-
pin 4 = load (PNP, 200 mA)
(pin 2 = not connected)
NPN
L+
L
1
4
3
pin 1 = L+ (10...30 V DC)
pin 3 = L-
pin 4 = load (NPN, 200 mA)
(pin 2 = not connected)
4 Operation
Check whether the sensor operates correctly.
• Receiver (OGE38x): The yellow LED is lit when the switching ouptut is swit-
ched. The green LED is lit when the sensor is ready for operation.
• Transmitter (OGS38x): The green LED is lit when the sensor is ready for
operation.
5 Maintenance
►Keep the lens of the sensor free from soiling.
►For cleaning do not use any solvents or cleaning agents which could damage
the plastic material.
This manual suits for next models
1
Table of contents
Other IFM Accessories manuals
IFM
IFM Efector 200 OJ User manual
IFM
IFM 402946 User manual
IFM
IFM PN3 Series User manual
IFM
IFM JN2301 Application guide
IFM
IFM PI22 Series User manual
IFM
IFM Efector 200 OG User manual
IFM
IFM Efector 200 OJ51 Series User manual
IFM
IFM PI28 Series User manual
IFM
IFM OID20 Series User manual
IFM
IFM OGE7 Series User manual
