Idis DC-D4513RX User manual
Network
Camera
Quick Guide
Powered by
DC-D4513RX
DC-D4513WRX
2Quick Guide
Safety Precautions
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do
not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the
approval of the manufacturer as such additions may result in the
risk of re, electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling
that is not strong enough to sustain the camera. The
equipment may fall, causing serious injury to a child
or adult, and serious damage to the equipment. Wall
or shelf mounting should follow the manufacturer’s
instructions, and should use a mounting kit approved
by the manufacturer.
This equipment and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sucient
ventilation is required to prevent an increase in ambient
temperature which can cause malfunction or the risk of re.
7. Power Sources
This equipment should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power, please consult your equipment dealer or local
power company.
You may want to install a UPS (Uninterruptible Power Supply)
system for safe operation in order to prevent damage caused by
an unexpected power stoppage. Any questions concerning UPS,
consult your UPS retailer.
This equipment should be remain readily operable.
8. Power Cord
Operator or installer must remove power and TNT connections
before handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the equipment due to
lightning and power-line surges. If thunder or lightning is common
where the equipment is installed, use a surge protection device.
10. Overloading
Do not overload wall outlets and extension cords as this can result
in the risk of re or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this
equipment as they may touch dangerous voltage points or short
out parts that could result in a re or electric shock. Never spill
liquid of any kind on the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all
servicing to qualied service personnel.
13. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualied service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following
the operating instructions, adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualied technician to restore
the equipment to its normal operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance
— this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specied by the
manufacturer or that have the same characteristics as the original
part. Unauthorized substitutions may result in re, electric shock
or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask
the service technician to perform safety checks to determine that
the equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualied service person and
should conform to all local codes.
17. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specied so that the customer
and installer may determine a suitable maximum operating
environment for the equipment.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards
3Network Camera
FCC Compliance Statement
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15
OF THE FCC RULES. THESE LIMITS ARE DESIGNEDTO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE, IN
WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOIDTHE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE CAUSING EQUIPMENT REGULATIONS.
WEEE (Waste Electrical & Electronic Equipment)
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government oce,
for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
Safety Symbols
Symbol Publication Description
IEC60417, No.5031 Direct current
Copyright
© 2020 IDIS Co., Ltd.
IDIS Co., Ltd. reserves all rights concerning this document.
Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.
Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
Registered Trademarks
IDIS is a registered trademark of IDIS Co., Ltd.
Other company and product names are registered trademarks of their respective owners.
This product contains software built partially on open-source content. You may obtain the complete corresponding source code
depending on whether or not the source is publicly available under a license policy. For more information, refer to System > General
page. This product includes software developed by the University of California, Berkeley and its contributors, and software developed
by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). Also, this product includes cryptographic software
Warning: This product emits infrared light. Do not look into the IR LED.
4Quick Guide
Dome Cover
DC-D4513RX
DC-D4513WRX
Accessories
Upon purchasing the product, check inside the box to make sure all the following accessories are included. Some parts may dier
depending on the situation.
Item
Network Camera Guide Pattern
Quick Guide Screws and Anchors (each 2ea.)
Protect Connector Allen Wrench
Desiccant
Allen wrench, protect connector, and desiccant are included with
DC-D4513WRX model
only.
Please download software (IDIS Discovery, IDIS Center, IDIS Solution Suite Compact) and product manual from this link :
-IDIS Website (www.idisglobal.com)
-Search IDIS Discovery, IDIS Center, IDIS Solution Suite Compact.
Overview
• Product color and design may vary depending on the model.
• For more details on each part name, refer to the manual.
5Network Camera
Body
DC-D4513RX
2
1
3
4
5
6
8
79
0
DC-D4513WRX
2
1
4
5
6
8
7
!
9
0
1IR LED 7SD Memory Card Slot
2Lens 8Cable Access Hole
3Built-in Microphone 9Alarm I/O, Audio I/O
4Factory Reset Button 0Wall/Ceiling
Installation Hole
5Bottom Cover !Cable Rubber
6Network Port
6Quick Guide
Camera Installation
Removing the Dome Cover
DC-D4513RX
1 Turn the dome cover counterclockwise.
2 Remove the dome cover.
DC-D4513WRX
1 Loosen the screws counterclockwise using the
Allen wrench provided with the product.
2 Remove the dome cover.
Inserting a SD Memory Card
Insert a SD memory card into the SD memory card slot
with the‘microSD’printed facing upward.
micro
SD
Push the SD memory card until it disengages
from the slot, and then pull it out.
microSD Logo is a trademark of SD-3C, LLC.
Installation
DC-D4513RX
1 Use the screws, anchor provided with the camera
to secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screw holes if
necessary.
7Network Camera
2 Connect external devices, the network cable, and
the power adapter.
3 Adjust the angle. For more details, refer to Angle
Adjustment.
DC-D4513WRX
1 Push the network cable through the cable rubber,
using the protective connector provided.
Cable rubber
Protect
connector
Cable
2 Assemble the cable rubber to the bottom cover.
3 Use the screws, anchor provided with the camera
to secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screw holes if
necessary.
4 Connect external devices, the network cable, and
the power adapter.
5 Adjust the angle. For more details, refer to Angle
Adjustment.
6 Attach the enclosed desiccant to the designated
space inside the dome cover using double-sided
tape as shown below.
8Quick Guide
Angle Adjustment
2
3
1
1Lens Rotation 3Horizontal Rotation
2Vertical Rotation
Closing the Dome Cover
DC-D4513RX
Attach the dome cover to the bottom cover. Turn the
dome cover clockwise to fasten the dome cover.
DC-D4513WRX
Fasten the screws for the dome cover clockwise using
the Allen wrench provided with the camera.
Remove the protective lm outside.
9
V1.2
Specications
Operating
Temperature
DC-D4513RX
-10˚C ~ 50˚C (14˚F ~ 122˚F)
DC-D4513WRX
-30˚C ~ 55˚C (-4˚F ~ 131˚F)
Boot Up
Temperature
DC-D4513RX
0˚C ~ 50˚C (32˚F ~ 122˚F)
DC-D4513WRX
0˚C ~ 55˚C (32˚F ~ 131˚F)
Operating Humidity
0% ~ 90%
Power Source
PoE (IEEE 802.3af Class 2)
Power Consumption
Max. 6.2W
Approval
FCC, CE
External
Dimensions (Ø x H)
DC-D4513RX
110mm x 88mm (4.33”x 3.46”)
DC-D4513WRX
120mm x 92.9mm (4.72”x 3.65”)
Weight (Main Unit)
DC-D4513RX
0.25kg (0.55lb)
DC-D4513WRX
0.47kg (1.03lb)
This manual suits for next models
1
Table of contents
Languages:
Other Idis Security Camera manuals
Idis
Idis DC-E SERIES User manual
Idis
Idis DC-D4216RX User manual
Idis
Idis DC-D3214RX-N User manual
Idis
Idis DC-D4216X-A User manual
Idis
Idis DC-D1223WX' User manual
Idis
Idis DC-E SERIES User manual
Idis
Idis DC-S6481HRA User manual
Idis
Idis DC-B3303X User manual
Idis
Idis DC-D3233WRX User manual
Idis
Idis DC-C4212RX User manual
Idis
Idis DC-E1112WR User manual
Idis
Idis DC-D4811WRX-A User manual
Idis
Idis DC-S1283FX User manual
Idis
Idis DC-B1001 User manual
Idis
Idis DC-T6223HRL User manual
Idis
Idis DC-V4212XJ-A User manual
Idis
Idis DC-T4248HRA User manual
Idis
Idis DC-D4236RX User manual
Idis
Idis DC-D1223WX' User manual
Idis
Idis DC-T4516WRX User manual
