ICP DAS USA M-7053D User manual

M-7053D16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

M-7053D

16 Channel Digital Input Data Acquisition

Module

Quick Start Guide

Product Website:

http://www.icpdas-usa.com/m_7053d.html

http://www.icpdas-usa.com/dcon_utility_pro.html

1. Introduction

The M-7053D offers 16 fully independent channels and 2 common ground channels for

digital input. The differential inputs feature channel-to-isolation. Communicable over

Modbus RTU, RS-485 and DCON protocol. It comes with free EZ Data Logger software

for PC based data logging and monitoring systems. Supports operating temperatures

between -25°C ~ +75°C (-13°F ~ +167°F). The ICP DAS M-7000 family of network data

acquisition and control modules support Modbus RTU. They can be remotely controlled

using a set of commands called DCON protocol. With the Modbus RTU protocol, it can

easily communicate with most popular SCADA/HMI software and PLCs.

2. Terminal Assignment

M-7053D16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

3. Block/ Wiring Diagram

4. Default Settings

Default settings for the M-7053D module is:

。Protocol: Modbus RTU

。Module Address: 01

。DIO Type: Type 40

。Baud Rate: 9600 bps

M-7053D16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

5. Configuration

To install the module, follow the steps below:

1. Connect the thermistor analog input.

2. Connect the module to the RS-485 network using the DATA+ and DATA- terminals. If

the host is only equipped with an RS-232 interface, then an RS-232 to RS-485

converter will be required.

3. Connect the module to the power supply using the +Vs and GND terminals. Note that

the voltage supplied should be in the range of +10 to +30V DC.

4. Open DCON utility pro

click on COM port(first icon).

It can select multi-options such as Baud Rate, Protocol, Checksum, and Format to

search module. The default settings for the module can be found in Section 3. Click OK

after selecting the COM port setting.

M-7053D16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

5. DCON utility pro will search for the selected COM port according the setting

previously set. DCON Utility Pro supports DCON and Modbus protocol for all ICPDAS

and the others modules.

M-7053D16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

6. Configuration I/O module setting on PC

7. For M-7000 modules using the Modbus RTU protocol, configure the module using the

following functions.

Sub-function 04h of Function 46h, see user manual Section 3.3.2

Sub-function 06h of Function 46h, see user manual Section 3.3.4

Sub-function 08h of Function 46h, see user manual Section 3.3.6

For M-7000 modules using the Modbus RTU protocol, use Function 04h to read the

data from the input channels. See user manual Section 3.2 for details.

M-7053D16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

8. If user doesn’t know command, user can select Address and ID, it will show some

refer commands as below. User can select necessary command to test or debug

modules.

M-7053D16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

Table of contents

Other ICP DAS USA Control Unit manuals

ICP DAS USA

ICP DAS USA ZT-2570 User manual

ICP DAS USA

ICP DAS USA tM-TH8 User manual

ICP DAS USA

ICP DAS USA USB-87P1 User manual

ICP DAS USA

ICP DAS USA PDS-5000 Series User manual

ICP DAS USA

ICP DAS USA iWSN-110X Series User manual

ICP DAS USA

ICP DAS USA XP-8000-Atom-CE6 User manual

ICP DAS USA

ICP DAS USA EIP-2000 Series Installation guide

ICP DAS USA

ICP DAS USA tET-P2A2 User manual

ICP DAS USA

ICP DAS USA tM Series User manual

ICP DAS USA

ICP DAS USA ECAT-2011H User manual

ICP DAS USA

ICP DAS USA GTM-204M-4G User manual

ICP DAS USA

ICP DAS USA CAN-8123 User manual

ICP DAS USA

ICP DAS USA tSH-725 User manual

ICP DAS USA

ICP DAS USA ISN-101 User manual

ICP DAS USA

ICP DAS USA LP-8 21 Series General instructions

ICP DAS USA

ICP DAS USA ET-6000 Series User manual

ICP DAS USA

ICP DAS USA I-7014D User manual

ICP DAS USA

ICP DAS USA I-8088W User manual

ICP DAS USA

ICP DAS USA M-7019Z User manual

ICP DAS USA

ICP DAS USA ET-7200 Series User manual

ICP DAS USA

ICP DAS USA I-7063D User manual

ICP DAS USA

ICP DAS USA PDS-220F Series User manual

ICP DAS USA

ICP DAS USA ECAT-2050 User manual

ICP DAS USA

ICP DAS USA I-7045D User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual