ICP DAS USA ECAT-2012H User manual

Technical support: servic[email protected] P1

ECAT-2012H Quick Start

v1.0, Oct. 2019

What’s in the box?

1 Connecting the Power and Host PC

Switch on module and connect it to an EtherCAT network

NOTE: Attaching an ESC directly to an office network will result in network

flooding, since the ESC will reflect any frame – especially broadcast frames –

back into the network (broadcast storm).

Verify that LEDs indicator

The package includes the following items:

ECAT-2012H Module x 1

Quick Start x1 (This Document)

1) Connect the Host device to the IN

port on ECAT-2012H module.

2) Connect the PWR+ pin to positive

terminal on a +10 - +30 VDC power

supply, and connect the GND- pin to

the negative terminal.

Red, OK

Green, OK

OUT

+Vs

GND

F.G.

Technical support: servic[email protected] P2

2 Search Modules

ESI file

The latest ESI file (ICPDAS ECAT-2012.xml) can be

downloaded from ICP DAS website at

http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/software/

Install the ESI file

Copy the “ICPDAS ECAT-2012.xml” file to the Master Tools installation folder, as

indicated in the table below.

Software

Default Path

Beckhoff EtherCAT Configuration

C:\EtherCAT Configurator\EtherCAT

Beckhoff TwinCAT 3.X

C:\TwinCAT\3.x\Config\Io\EtherCAT

Beckhoff TwinCAT 2.X

C:\TwinCAT\Io\EtherCAT

Run the EtherCAT Master software (Beckhoff TwinCAT 2.X)

Switch on power and execute the TwinCAT System Manager (Config mode)

1. I/O Devices Right click 

Scan Devices…

2. Click “OK” button

3. Choose the correct network

device which is connected to

ECAT-2012H and click “OK”

button

Technical support: servic[email protected] P3

(Default Settings)

3 Wiring to the Connector

Wiring Tip

Connecting the wire

Removing the wire

Wire Diagrams

Voltage Input (Differential) Voltage Input (Single-ended) Current Input

4. Click “OK” to start scanning

Click “OK” to activate the free run

mode for TwinCAT system

manager

5. In the left-hand window,

ECAT-2012His now shown in the

TwinCAT system Manager

Use the blade of a

flat-head screwdriver to

push the wire clamp, then

hold until step 2 complete.



Insert the

wire



Use the blade of a

flat-head screwdriver to

push the wire clamp, then

hold until step 2 complete.



Remove the

wire



mV/V

Vx+

Vx-

mV/V V

Vx+

AGND

Vx+

Vx-

Technical support: servic[email protected] P4

Wiring the AI0 (Analog Input type default is Differential input)

Verifying the AI Functionality

Related Information

Connect the V0- (Pin01) to

signal positive (-)

Connect the V0+ (Pin02) to

signal positive (+)





(+)

(-)

Stable Signal Source (e.g., Dry Battery)

EtherCAT Series Product Page:

http://www.icpdas.com/root/product/solutions/industrial_communication/fieldb

us/ethercat/ethercat_selection_guide.html

Documentation & Software:

http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/

1. Click “AI0”in the left-hand window.

2. In the right-hand window, check the

voltage value in the “Value” item.

Table of contents

Other ICP DAS USA Control Unit manuals

ICP DAS USA

ICP DAS USA M-7033 User manual

ICP DAS USA

ICP DAS USA IR-712A User manual

ICP DAS USA

ICP DAS USA PISO-CPM100U-D/T User manual

ICP DAS USA

ICP DAS USA PETL-7060 User manual

ICP DAS USA

ICP DAS USA ET-2200 Series User manual

ICP DAS USA

ICP DAS USA I-8014W User manual

ICP DAS USA

ICP DAS USA tM-AD5 User manual

ICP DAS USA

ICP DAS USA tPET-P6 User manual

ICP DAS USA

ICP DAS USA M-7019Z User manual

ICP DAS USA

ICP DAS USA I-2533 User manual

ICP DAS USA

ICP DAS USA Zigbee ZT-2060 User manual

ICP DAS USA

ICP DAS USA ZT-2570 User manual

ICP DAS USA

ICP DAS USA tSH-700 Series User manual

ICP DAS USA

ICP DAS USA WF-2051 User manual

ICP DAS USA

ICP DAS USA M-7067D User manual

ICP DAS USA

ICP DAS USA M-7069D User manual

ICP DAS USA

ICP DAS USA ECAT-2051 User manual

ICP DAS USA

ICP DAS USA tM Series User manual

ICP DAS USA

ICP DAS USA LinPAC-51 Series User manual

ICP DAS USA

ICP DAS USA IR-310-RM User manual

ICP DAS USA

ICP DAS USA M-7067 User manual

ICP DAS USA

ICP DAS USA PDS-5000 Series User manual

ICP DAS USA

ICP DAS USA M-7051 User manual

ICP DAS USA

ICP DAS USA MDC-700 Series User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual