IconBiT PSS970BT User manual
PSS970BT
user manual
English
Deutsch
Nederlands
Français
Русский
English
2
Preamble
Thank you for purchasing the portable, digital PSS970BT
Speaker made by iconBIT. Please read all instructions
carefully and keep this manual for future use. For more
queries, please contact your local customer service centre.
Features
1. Bluetooth connection. To enjoy the ultimate wireless music fun
Latest Bluetooth technology 2.1 + EDR Class 2 version. No
more cable clutter. Enjoy the unlimited wireless music
environment.
2. Bass Boost, powerful resonance
Super bass system with low frequency passive membrane,
for a tremendous bass performance - anytime, anywhere.
3. Powered by an extreme long life Lithium-Ion battery
The included battery is rechargeable, removable, replaceable
for ultimate mobility.
4. Audio Input Support
Easily connect mobile phones, computers and other audio
devices.
English
3
Install the battery
1. Open the rear casing of the device. Put the lithium-ion
battery inside the device. Make sure that the golden pins of
the battery and of the device have contact.
2. With the included mini USB cable you can charge the
PSS970BT. Please connect the USB cable with the “DC 5V”
port of the device and the USB port of your computer. The
PSS970BT will immediately start charging.
3. The power indicator LED turns red – that means your
PSS970BT is charging. The power indicator LED turns mixed
red, blue and white – that means your PSS970BT is in use
while charging.
1. Fidelity magnetic speaker
2. Passive speaker
English
4
3. LED indicator
Display Bluetooth connection / battery status
4. LINE-IN jack
5. USB cable slot for recharging the included battery
6. Power key
Move to the left - power on; move to the right - power OFF
English
5
7. Volume up
8. Next Play the next song
9. Pause/Play/Phone Short Press will Pause/play the
music, the key function will be answer / hang up the phone
in Bluetooth mode.
10. Previous Play previous song
11. Volume down
12. Mode Key Press to change mode
13. MicroSD card slot 32G Max microSD card support
English
6
Bluetooth connectivity
1. Switch on speaker
Slide the power button to the right to activate the
loudspeaker. Bluetooth will be activated simultaneously
(acoustic signal). The LED flashes blue – that means your
PSS970BT is scanning Bluetooth-Devices in your
environment.
2. Set your phone/computer into Bluetooth mode and scan
for “iconBIT PSS970BT”. Then connect your phone/computer
with the loudspeaker. Your phone/computer will request a
PIN. The default PIN´s for your loudspeaker can be “0000” or
“1234”.
3. If pairing is successful, the blue light disappears from the
LED display and the speaker is ready to play your songs via
Bluetooth.
4. Now you can play your music files from your
phone/computer and the sound will come from your
PSS970BT. You can either navigate your music files with the
buttons of the PSS970BT or directly from your
phone/computer.
English
7
Answer the phone
Step 1. Make a call
After Bluetooth pairing successful, press Pause/Play/Call
button more than 0.25 seconds, the last phone from the
mobile will be call back again. Short press to hang up.
Step 2. Answer the phone
After Bluetooth pairing successful, when the call coming, just
briefly press Pause/Play/Call key and the call will be
answered. Short press Pause/Play/Call key again and hang
up the phone.
MicroSD card music play
Insert TF card into the slot, speaker automatically play music
from TF card with voice prompt. Audio files automatically
read the card.
Headphone audio output
As soon as a headset or a LINE -OUT cable is connected to
the headphone jack, the speaker mutes and all audio signals
are output through the headphone jack.
English
8
LINE IN input
Of course, you can connect devices to the PSS970BT with a
cable. Simply plug the output cable of your audio device into
the LINE IN input of the PSS970BT.
Troubleshooting
1. Device turns off after turning it on: low battery, please
recharge;
2. Device reboots and then turns off automatically: low
battery, please recharge;
3. No sound: check volume or connection;
4. Buttons do not respond or have no function: remove
battery and reinsert;
English
9
5. Bluetooth connection does not work: there are no
Bluetooth devices in your environment to connect, check
your phone/computer´s Bluetooth status, restart devices.
Specifications
Product Model: PSS970BT
Bluetooth Standard: Bluetooth V2.1 + EDR
Bluetooth distance: ≤ 10M
Recommend Input adaptor: 5V/1000mA
Rated Power: 5W
Frequency response: 100Hz-18KHz
Impedance: 4ohm
Deutsch
10
Vorwort
Danke, dass Sie sich für den portablen, digitalen
Lautsprecher PSS970BT aus dem Hause iconBIT entschieden
haben. Bitte lesen Sie sorgfältig alle Instruktionen durch und
bewahren Sie dieses Handbuch gut auf.
Features
1. Bluetooth-Verbindung. Für den ultimativen Wireless-Music
Spaß.
Neueste Bluetooth Technologie 2.1 + EDR Class 2 Version.
Endlich vorbei mit dem altmodischen Kabelsalat. Genieße den
unbegrenzten, kabellosen Musik-Spaß.
2. Bass Boost, kraftvolle Resonanz
SuperBass-System mit Low-Frequency-Passiv Membran, für
eine gewaltige Bass-Performance. Für Musikgenuss der
Extraklasse – jederzeit und überall.
3. Powered by Lithium-Ion Akku mit extrem langer
Akkulaufzeit. Der Akku ist herausnehmbar und austauschbar.
4. Line-In
Einfacher Anschluss von Mobiltelefonen, Computern und
anderen Audiogeräten.
Table of contents
Languages:
Other IconBiT Speakers manuals
