IBM BladeCenter S 7779 User manual

IBM BladeCenter S

Types 7779 and 8886

Power Modules



IBM BladeCenter S

Types 7779 and 8886

Power Modules



Note

Note: Before using this information and the product it supports, read the general information in

Notices; and read the IBM Safety Information and the IBM Systems Environmental Notices and User

Guide on the IBM Documentation CD.

Sixth Edition (July 2013)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Chapter 1. BladeCenter S chassis power

modules ..............1

Power modules .............2

Chapter 2. Installation guidelines ....5

System reliability guidelines .........5

Handling static-sensitive devices........6

Chapter 3. Installing a power module . . 7

Chapter 4. Removing a power module . . 9

Appendix A. Power cords.......11

Power cords - C14 power module .......11

Power cords - C20 power module .......13

Appendix B. IBM Statement of Limited

Warranty Z125-4753-09 08/2006 ....15

Part 1 - General Terms...........15

Part 2 - Country-unique Terms ........19

Part3-Warranty Information ........29

Notices ..............33

Trademarks ..............33

Important notes .............34

Particulate contamination..........35

Documentation format...........36

Telecommunication regulatory statement ....36

Electronic emission notices .........36

Federal Communications Commission (FCC)

statement ..............36

Industry Canada Class A emission compliance

statement ..............37

Avis de conformité à la réglementation

d'Industrie Canada ...........37

Australia and New Zealand Class A statement . 37

European Union EMC Directive conformance

statement ..............37

Germany Class A statement ........37

Japan VCCI Class A statement .......38

Japan Electronics and Information Technology

Industries Association (JEITA) statement....39

Japan Electronics and Information Technology

Industries Association (JEITA) statement....39

Korea Communications Commission (KCC)

statement ..............39

Russia Electromagnetic Interference (EMI) Class

A statement .............39

People's Republic of China Class A electronic

emission statement ...........39

Taiwan Class A compliance statement ....40

Index ...............41

iv BladeCenter S Types 7779 and 8886: Power Modules

Chapter 1. BladeCenter S chassis power modules

A minimum of two power modules must be installed in power module bays 1 and

2 on the rear of the BladeCenter S chassis. Additional power modules, if installed,

are installed in power module bays 3 and 4.

Power modules

The BladeCenter S system supports up to four autoranging power modules that

are capable of supporting either 110 V ac or 220 V ac.

Power module

AC power LED

DC power LED

Fault LED

There are two types of power modules. These power modules are identical except

for the power cord connector; one power module has a C14 connector and the

other power module has a C20 connector. Both types of power modules can be

installed in the same chassis.

Table 1. Power modules used in the BladeCenter S system

Power module with C14 connector

C14 connector

Power module with C20 connector

C20 connector

Within the BladeCenter S chassis, all power supplies are combined into a single

power domain, which distributes power to each of the blade servers and modules

through the system midplane.

2BladeCenter S Types 7779 and 8886: Power Modules

You must install a minimum of two power modules. If you install only two power

modules, install them in power module bays 1 and 2 (the top and bottom power

module bays on the right as you face the rear of the BladeCenter S chassis).

Note: You must install all four power modules if you are using both disk storage

modules.

If you disengage or remove all devices from the front of the BladeCenter S chassis

(media tray, blade servers, and disk storage modules), the power modules will be

disabled.

Indicators and controls

There are three LEDs on each power module:

AC power

Lit (green). Power is being supplied to the power module.

DC power

Lit (green). Power is being supplied from the power module to the

BladeCenter S chassis midplane.

Fault Lit (amber). There is a fault with the power module.

Note: Before unplugging the AC power cord from the power module or

removing the power module from the BladeCenter S chassis, verify that the

capacity of the remaining power modules are sufficient to meet the

minimum power requirements for all components in the BladeCenter S

chassis. You can view power status and requirements through the

advanced management module.

For information on accessing and using the advanced management

module, see the Advanced Management Module User's Guide.

1. Verify that the power modules are properly connected to an AC power

source. All power modules in the BladeCenter S chassis must be

connected to the same power input voltage (either 110 V ac or 220 V

ac). Do not mix power input voltages.

2. Unplug the AC power cord from the power module and plug it in

again.

3. Reseat the power supply.

4. Swap the AC power cord with a power cord that is known to be

working.

5. Move the power module to another power module bay in the

BladeCenter S chassis.

Chapter 1. BladeCenter S chassis power modules 3

4BladeCenter S Types 7779 and 8886: Power Modules

Other manuals for BladeCenter S 7779

This manual suits for next models

Table of contents

Other IBM Server manuals

IBM

IBM QS22 - BladeCenter - 0793 User manual

IBM

IBM 86655RY - Netfinity 7600 - 8665 Owner's manual

IBM

IBM Redbooks x3850 X5 User manual

IBM

IBM x3655 - System - 7985 User manual

IBM

IBM BladeCenter HS20 Type 8843 User manual

IBM

IBM BladeCenter HS22 User manual

IBM

IBM System x3400 M3 Types 7378 User manual

IBM

IBM System x3250 M4 Operation manual

IBM

IBM S822LC Installation guide

IBM

IBM AS/400 Use and care manual

IBM

IBM System x3755 M3 7164 User manual

IBM

IBM 9040-MR9 User manual

IBM

IBM eServer 240 xSeries Product information sheet

IBM

IBM 7380E1U User manual

IBM

IBM Power 780 Installation guide

IBM

IBM System x3530 M4 Installation and maintenance instructions

IBM

IBM eserver i5 User manual

IBM

IBM B50 User manual

IBM

IBM Eserver xSeries 360 Type 8686 User manual

IBM

IBM eServer xSeries 455 Type 8855 User manual

IBM

IBM 8645 - Eserver xSeries 220 Owner's manual

IBM

IBM 8682 - Eserver xSeries 350 Owner's manual

IBM

IBM BladeCenter T Type 8720 User manual

IBM

IBM 9228 - IntelliStation Z - Pro User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started