IBM ThinkPad 130 Reference manual

IBM 3745 Communication Controller

Models 130, 150, and 170 IBM

Introduction

GA33-0138-2

IBM 3745 Communication Controller

Models 130, 150, and 170 IBM

Introduction

GA33-0138-2

Third Edition (June 1991)

This major revision obsoletes and replaces GA33-0138-1. It reflects new enhancements to the IBM 3745 Communication Controller

Models 130, 150, and 170. Changes or additions to the text and illustrations are showed by a vertical line to the left of the change.

Changes are made periodically to the information in this publication; before using this publication in connection with the operation of

IBM systems, consult the latest

IBM System/370, 30xx, 4300, and 9370 Processor Bibliography, GC20-0001.

Publications are not stocked at the addresses given below. Requests for IBM publications should be made to your IBM

representative or to the IBM branch office serving your locality.

A form for readers' comments is provided at the back of this publication. If the form has been removed, comments may be

addressed to either of the following:

International Business Machines Corporation

Department 6R1LG

180 Kost Road

Mechanicsburg, PA 17055

U.S.A.

IBM France

Centre d'Etudes et Recherches

Service 0798, BP79

06610 La Gaude

France

IBM may use or distribute whatever information you supply in any way it believes appropriate without incurring any obligation to you.

Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is subject to

restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Special Notices

References in this publication to IBM products, programs, or services do not imply that IBM intends to

make these available in all countries in which IBM operates.

Any reference to an IBM licensed program or other IBM product in this publication is not intended to state

or imply that only IBM's program or other product may be used. Any functionally equivalent program that

does not infringe any of IBM's intellectual property rights may be used instead of the IBM product.

Evaluation and verification of operation in conjunction with other products, except those expressly

designated by IBM, is the user's responsibility.

|The following paragraph does not apply to the United Kingdom or to any country where such

|provisions are inconsistent with local law.

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS"

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE.

| Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore this

| statement may not apply to you."

IBM may have patents or pending patent applications covering subject matter in this document. The

furnishing of this document does not give you any license to these patents. You can send license

enquiries, in writing, to the IBM Director of Commercial Relations, IBM Corporation, Purchase, NY 10577,

U.S.A.

The following terms, DENOTED BY AN ASTERISK (*), used in this publication, are trademarks of the IBM

Corporation in the United States or other countries:

| The following terms, DENOTED BY A DOUBLE ASTERISK (**), used in this publication, are trademarks of

| other companies:

IBM

|VTAM

|ES/9000

3090

LPDA

VM/XA

RETAIN

OS/2

PS/2

Personal Computer AT

Personal Computer XT

|Personal System/2

NetView

ESA

MVS/XA

MVS/ESA

VSE

|Ethernet|XEROX Inc.

iii

Federal Communications Commission (FCC) Statement

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own

expense.

Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM is not responsible

for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes

or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

In addition to the above FCC statement, you should be aware that:

The statement applies only to IBM 3745-130/150/170 Communication Controllers used in the USA and

having a label on the back that indicates compliance.

The phrase

instruction manual

means this manual and:

IBM System/360, System/370, 4300 Processors: Input/Output Equipment Installation Manual - Physical

Planning,

GC22-7064

IBM 3745-130/150/170 Preparing for Connection,

GA33-0140.

IBM 3745 Communication Controller: Connection and Integration,

SA33-0141.

For Canada, Canadian Department of Communication Statement, GX27-3883 applies.

iv IBM 3745 Models 130, 150, 170: Introduction

IBM 3745 Communication Controller Model 130, 150, or 170 with an IBM 3151 Display Station as

Operator Console.

Note: This picture shows the design model only.

vi IBM 3745 Models 130, 150, 170: Introduction

About This Book

How to Use This Book

This book has been written to help you understand the basic concepts of IBM

communication controllers, and especially the key advantages and capabilities of

the IBM 3745 Communication Controller Models 130, 150, and 170 for your

network. These controllers and the appropriate programming support are

described; as well as the powerful problem determination mechanisms and the

controller maintenance philosophy.

The text in color is for fast reading and

understanding the main functions of the product.

The smaller black text describes

details for specialists to help them plan their network.

The charts at the back of the manual can be removed to make foils for

presentations when required.

Who Should Use This Book

This book is for network specialists, data processing managers, and planners who

want to learn about and evaluate the capabilities of the IBM 3745 Communication

Controller Models 130, 150, and 170 in their data communication network.

The reader is assumed to be familiar with data communication networks

Terms Used in This Book

A list of abbreviations is provided at the back of the book.

The term 3745 applies to the 3745 Models 130, 150, or 170. Sometimes the model

| numbers are added to 3745 when a precise discrimination between 3745 models

| 210/310/410/610 and 130/150/170 is necessary.

| The term Network Control Program (NCP) stands for Advanced Communications

| Function for the Network Control Program (ACF/NCP) when used alone.

The terms DCE and DTE used throughout this book stand for:

DCE Data circuit-terminating equipment (such as modems, data service units, or

auto-call units)

DTE Data terminal equipment.

What is New in This Book

The additional text, showed by revisions bars to the left, describes the latest

enhancements:

|Attachment to Ethernet** Version 2 and IEEE 802.3 local area network (LAN).

|Timed initial program load (IPL).

|Rename load module function.

|3745 installation and reconfiguration improvements.

Where to Find More Information

The “Bibliography” on page X-11. lists 3745 manuals according to the user tasks

they describe.

viii IBM 3745 Models 130, 150, 170: Introduction

This manual suits for next models

Other IBM Controllers manuals

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual