HumanTechnik CM-BT2 User manual
HU Kezelési útmutató
GB Operation Instructions
SE Bruksanvisning
NO Betjeningsveiledning
Kommunikationssysteme
Communication system
Bluetooth Headset
Oldal 72
Side 30
Sida 16
Page 2
Bluetooth Headset
Kommunikasjonssystem
Bluetooth headset
FIN Käyttöohje
PO Instrukcja obsługi
Kommunikaatiojärjestelmä
Strona 58
Sivu 44
Bluetooth-kuulokemikrofoni
System komunikacji
Zestaw słuchawkowy Bluetooth
Kommunikációs rendszer
Bluetooth headset
English 2
Contents
General Information
Bluetooth radio technology 3
Package contents 3
First-Time Operation
Description of the operating elements 4/5
Charging the »CM-BT2« 6
Charging the »CM-BT2« with the power supply 6
Charging the »CM-BT2« with the 12 V plug-in charger 6
Charging the »CM-BT2« via the USB port on a computer 7
»CM-BT2« operating time 7
Switching the »CM-BT2« on / off 8
Pairing the »CM-BT2« with a compatible telephone 8
Disconnecting the »CM-BT2« from the telephone 9
Reconnecting the »CM-BT2« with the telephone 10
Basic Operation
Making and answering calls 10
Using the »CM-BT2« as music headphones with the
telephone 10
Adjusting the listening volume 11
Connecting the »CM-BT2« to a compatible computer 12
Neckloop Safety Closure 12
Appendix
Safety notes 13
Maintenance and care 13
Environmental notes/disposal 14
Warranty 14
Specications 15
We would like to congratulate you on purchasing your new CM-BT2 Blue-
tooth headset communications system.
You have bought a state-of-the-art, highly reliable electronic device. Please
read these operating instructions carefully. They explain how to start up the
device and describe all the system options and functions.
English 3
General Information
Bluetooth radio technology
Bluetooth is a radio technology that makes it possible to connect compatible
communications devices together without wires.
To establish and maintain a connection via Bluetooth, it is not necessary to
have a clear line of vision between the devices (e.g. telephone and head-
set).
However, the distance between the devices must not exceed ten meters.
Obstacles – such as walls or other electronic devices – may cause the con-
nection to experience interference, which can diminish reception quality.
The »CM-BT2« headset complies with Bluetooth Specication 2.1 and sup-
ports the following proles:
• Headset (HSP) with talk / music output
• Hands-free (HFP) wireless telephony
• Advanced Audio Distribution (A2DP) stereo headphones
• Audio/Video Remote Control (AVRCP)
Please contact the manufacturers of your other devices to nd out if they
are compatible with the »CM-BT2«.
The use of Bluetooth radio technology may be restricted in some areas. Ple-
ase contact your local authorities or service provider for more information.
Package contents
Please check that all of the following items are included:
- »CM-BT2« headset with teleloop
- USB charging cable
- 12 V plug-in charger
- Power supply
- Operating instructions
- Guarantee card
Please contact the specialist dealer or the manufacturer directly should any
of the items be missing.
1Neckloop
2Status indicator
5Additional volume
setting for the tele-
loop
6Volume setting
for the teleloop /
headphones
7Headphones and charger connection
3Integral microphone
4Function key
First-Time Operation
Description of the operating elements
English 4
1 Neckloop
2 Status indicator
- Red light is visible → »CM-BT2« is switched off
- Red light ashes slowly → Warning: battery low
- Blue/red light ashes alternately → Pairing mode
- Blue light ashes every
3 seconds → Connection attempt
- Blue light is visible for 1 second
every 5 seconds → Connection made with
device
3 Integral microphone
4 Function key
Switching the »CM-BT2« on / off
Call answer / call termination key
Pairing key
5 Additional volume setting for the neckloop
The volume of the neckloop can be increased independently using
this control dial.
6 Volume setting for the neckloop / headphones
The volume of the neckloop/headphones can be adjusted with
both of these keys.
7 Headphones and charger connection
This 3.5 mm jack can be used to connect the headphones or charge
the CM-BT2 with the charging cable.
English 5
Charging the »CM-BT2«
The »CM-BT2« has an integral, rechargeable lithium polymer battery. Prior
to initial use, it is recommended that the »CM-BT2« is fully charged.
Please note that the »CM-BT2« cannot be used whilst it is
being charged
Charging the »CM-BT2« with the power supply
Connect the enclosed USB charging cable to the »CM-BT2« using the char-
ger connection 7. Connect the other end of the USB charging cable to the
enclosed power supply. Insert the power supply into a 230 V plug socket.
The »CM-BT2« is fully charged when the status indicator has gone out.
Charging the »CM-BT2« with the power supply
Connect the enclosed USB charging cable to the »CM-BT2« using the char-
ger connection 7. Connect the other end of the USB charging cable to the
enclosed power supply. Insert the power supply into a 230 V plug socket.
The »CM-BT2« is fully charged when the status indicator has gone out.
English 6
Charging the »CM-BT2« via the USB port on a computer
Connect the enclosed USB charging cable to the »CM-BT2« using the char-
ger connection 7. Connect the other end of the USB charging cable to the
USB port on your computer. The »CM-BT2« is fully charged when the status
indicator has gone out.
CM-BT2 operating time
In normal use, the »CM-BT2« has 3 hours of talk time and up to 120 hours
of standby time.
When the battery is discharged, the red status indicator ashes slowly and
the »CM-BT2« needs to be charged
Note:
The operating duration is dependent on the way in which the »CM-BT2« is
used and on how high the volume is set.
Charging will take longer if the »CM-BT2« has not been used for a long time
and the battery has discharged itself.
English 7
4. Select the »CM-BT2« from the list of devices that are found.
If necessary, enter the password „0000“ to pair the »CM-BT2« and
the telephone and establish a connection.
5. If the pairing is successful, the blue status indicator
on the »CM-BT2« ashes four times quickly and the teleloop and head
phones emit an audible signal.
1. Switching the telephone on.
2. Press the function key 4on the »CM-BT2«
for approx. 6 seconds until the blue and red status
indicator ashes alternately. The »CM-BT2«
remains in pairing mode for 2 minutes.
3. Activate the Bluetooth function on the telephone
and start to search for Bluetooth devices.
Instructions on how to do this can be found in
the operating instructions for your telephone.
Pairing the »CM-BT2« with a compatible telephone
Before you can use the »CM-BT2« with the telephone, it has to be added
to the device list in the telephone. To do so, follow the instructions in the
telephone operating manual explaining how to activate Bluetooth.
Press the function key 4for approx. 3 seconds un-
til the blue status indicator lights up. The teleloop/
headphones emit an audible signal to indicate that the
»CM-BT2« is now switched on. If there is a paired de-
vice nearby, the »CM-BT2« will automatically connect
to this device.
To switch off, press the function key 4for approx. 3
seconds until the red status indicator lights up. The te-
leloop/headphones emit an audible signal to indicate
that the »CM-BT2« is now switched off.
English 8
Switching the »CM-BT2« on/off
3s
6s
English 9
For some telephones, it might be necessary to make the connection manu-
ally once the headset has been registered.
For more information, refer to your telephone’s operating manual. You only
have to register the »CM-BT2« on the telephone once. After that, the »CM-
BT2« will be recognized automatically.
The »CM-BT2« is connected to the telephone when the blue status indica-
tor lights up for 1 second every 5 seconds.
The »CM-BT2« will now appear in the menu of your telephone that displays
all the Bluetooth devices that are currently paired with the telephone.
Disconnecting the »CM-BT2« from the telephone
Perform one of the following steps to terminate the connection between
the »CM-BT2« and the telephone (e.g. when you want to connect another
Bluetooth device to the telephone):
• Switch the »CM-BT2« off.
• Terminate the connection to the »CM-BT2« in the telephone’s
Bluetooth menu.
• Move the »CM-BT2« to a position more than 10 meters away from the
telephone.
Please note: You do not have to delete the »CM-BT2« from the telephone’s
list of compatible devices to terminate the connection.
English 10
Reconnecting the »CM-BT2« to the telephone
The blue status indicator ashes slowly as soon as the »CM-BT2« becomes
disconnected from the telephone, for example, if the distance between them
is too great.
Once the »CM-BT2« and the telephone are within range of one another
again, the »CM-BT2« reconnects automatically or can be reconnected by
pressing the function key once. The blue status indicator ashes for 1 se-
cond every 5 seconds and the teleloop/headphones emit an audible signal
when the connection is re-established.
Basic operation
Making and answering calls
To make a call, ensure that the telephone is connected to the »CM-BT2«
and make the call as normal.
To make a call, press the function key 4 briey.
To end a call, use the buttons on the telephone or press the function key
on the »CM-BT2«.
Using the »CM-BT2« as music headphones with the telephone
If there is a music player integrated in your telephone, you can also use
the »CM-BT2« to listen to music. As soon as an incoming call is detected,
the music will be interrupted, the »CM-BT2« will ring and you can press the
function key 4 to answer the call. The music will continue to play once you
have ended the call.
Other manuals for CM-BT2
3
Table of contents
Languages:
Other HumanTechnik Headset manuals
HumanTechnik
HumanTechnik CM-BT2 User manual
HumanTechnik
HumanTechnik cm-BT User manual
HumanTechnik
HumanTechnik CM-BT2 User manual
HumanTechnik
HumanTechnik Earis Set User manual
HumanTechnik
HumanTechnik cm-BT User manual
HumanTechnik
HumanTechnik Tiviton DAB User manual
HumanTechnik
HumanTechnik SONUMAXX 2.4 User manual
HumanTechnik
HumanTechnik Introson 2.4 User manual
HumanTechnik
HumanTechnik Swing User manual
HumanTechnik
HumanTechnik PL-100 User manual
