Huawei OceanStor V3 Series User manual
Overview
Where to get help
1
a
b
Feedback
c
Copyright ©Huawei Technologies Co., Ltd. 2016
All rights reserved.
Introduction to OceanStor V3 Series
Before You Start
OceanStor
5300 V3&5500 V3 Storage System
V300R002
Quick Installation Guide
Issue: 06
Date: 2016-11-18
HUAWEI OceanStor V3 series storage systems are innovative mid-range and high-end offerings that are ready to
meet your current and future storage requirements. They are designed to provide medium- and large-scale
enterprises with improved storage performance, efficiency, security, scalability, and manageability.
This document guides you through a time-saving process for installing a storage system. For more information,
see the OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 Storage System V300R002 Installation
Guide.
You can obtain the product documentation from the documentation CD-ROM delivered with the product or
from http://enterprise.huawei.com. You can also register for a Huawei support account at this website to
browse and download valuable information and sign up for product updates.
Your feedback is important to us. If you have any comments about this document, please submit
them to us on the Huawei Enterprise website.
5300 V3 5500 V3 5600 V3 5800 V3 6800 V3
Arrange for at least three persons to carry and install an enclosure to avoid personal injury or device damage.
Before you handle devices, wear ESD clothes, a pair of ESD gloves, or an ESD wrist strap and remove
conductive objects such as ornaments and watches.
Do not operate devices or handle cables on a stormy day.
To avoid eye injuries, do not look into the optical outlets without eye protection.
Scenario 1 Wearing an ESD wrist strap whose
ground terminal is a plug Scenario 2 Wearing an ESD wrist strap whose
ground terminal is a metal clip
Installation Process
Safety Information
2
CAUTION
Installation Process
Initializing the Storage System
A generic view
of cable connections
(Optional) Connecting ground
cables
Connecting disk enclosures
Connecting the storage system
to the network
Connecting to the maintenance
terminal
Connecting power cables
Checking device installation
Checking cable connections
Switching on external
power supplies
Pressing the power button
on either controller
Checking status indicators
Installing front panels
Installation Preparations
Installing
Devices
Connecting Cables
Powering On the
Storage System
Checking
Hardware Installation
(Optional) Installing Host Software
Checking installation tools
Checking circuit breakers
Checking components
Planning device installation positions
Removing filler panels
Determining device installation
positions using installation templates
Installing guide rails
Installing storage devices
into the cabinet
Installing a cable tray
(Optional) Installing a disk module
Installing filler panels
1c Checking components
The following installation tools are required:
Phillips screwdriver (M3 to M6)
Flat-head screwdriver (M3 to M6)
Diagonal pliers
Floating nut mounting bar
A storage system power failure may cause devices connected
to the same circuit breaker to power off unexpectedly.
Therefore, ensure that the storage system power supplies
have functioning circuit breakers with the following amps:
AC power: 16 A
DC power: 32 A
1 Installation Preparations
Only materials involved in the installation process are listed here. The Packing List contains all materials required by the installation. The bag
containing the Packing List is attached to the outside of the carton.
Each controller of the OceanStor 5300 V3 is equipped with four 1 Gbit/s iSCSI host ports. Each controller enclosure of the OceanStor 5500
V3 is equipped with four smartIO host ports that do not support IP scale-out networking. In the following sections of this document, the
installation procedure is described using the OceanStor 5500 V3 as an example. The procedure for install the OceanStor 5300 V3 is similar.
3
Disk enclosure (2 U)
Controller enclosure (2 U)
Installation template
(for 2 U devices) Front panel of a
2 U device
High-density disk enclosure (4 U)
Adjustable guide rails Bearing guide rails
Disk enclosure (4 U)
Installation template (for
4 U devices) Front panel of a 4 U
device
Checking installation tools Checking circuit breakers
1b1a
NOTICE
Cable tray
Floating nut and M6 screw
Ground cable
Multi-mode optical fiber
cable
Mini SAS HD electrical
cable Network cable
Mini SAS HD optical
cable
Planning device installation positions
Removing filler panels
2 Installing Devices
2b
2a
Recommended installation positions
Total required cabinet space = 2 U + 2 U x (Number of 2 U disk enclosures) + 4 U x (Number of 4 U disk enclosures)
Note: The height of the storage system is measured by the unit of U. 1 U equals 44.45 mm (1.75 inches).
Tips
Install the devices from
bottom up and from heavy
to light.
4
Disk enclosure (4 U)
Install the controller
enclosure in the middle of
the cabinet between 17 U
and 20 U.
Disk enclosure (4 U)
Disk enclosure (4 U)
Disk enclosure (4 U)
Controller enclosure (2 U)
Determining device installation positions using installation templates
2c
Scenario 2
Installation position of a 4 U device
Scenario 1
Installation position of a 2 U device
Low base of
the guide rail
Low base of
the guide rail
On the mounting bars, use a marker to mark the holes where screws will be installed to secure the storage devices.
Installation positions of 2 U device fixing screws
Installation positions of guide rail fixing screws
Installation positions of 4 U device fixing screws
Installation positions of guide rail fixing screws
5
NOTE
Installing guide rails
2d
The adjustable guide rails are 600 mm (23.62 in.) to 900 mm (35.43 in.) long.
The adjustable guide rails are preconfigured with positioning pins applicable to square holes only. For round holes,
replace the positioning pins.
Two paired adjustable guide rails must be positioned exactly parallel to one another.
Scenario 2
Attaching adjustable guide rails for
a 4 U device
Scenario 1
Attaching adjustable guide rails for a
2 U device
Front
Front
Rear
Rear
6
7
Scenario 3
Installing bearing guide rails for a high-density disk enclosure
(2) Remove a rail support.(1) Pull out the inner rail of the ball bearing guide rails.
(3) Loosen the screws and adjust the length of the ball
bearing guide rail to be the same of the cabinet depth. (4) Install the ball bearing guide rails.
Left guide rail
Right guide rail
8
(6) Installing a ball bearing guide rail bracket.
(7) Check the installation of the ball bearing guide rails.ng Hardware Installation
Check the distance between the left and right guide rails, and
ensure that the two templates can snatch into the ball bearing
guide rails.
Check that the ball of the ball bearing guide rail has been
placed at the most front end of the middle rail.
Check that the edges of the middle rail and external rail are
at the same vertical plane.
(5) Fasten screws.
9
Scenario 2 Installing a high-density disk enclosure
(1) Install the inner rail. (3) Install a cover.
Scenario 1 Installing a controller enclosure and an ordinary disk enclosure
Install a disk enclosure onto the guide rails
using the same method as installing the
controller enclosure.
(4) Install the system enclosure.
(2) Mount the high-density
disk enclosure.
When mounting the high-density disk enclosure, place the side step in the rear of the high-density disk
enclosure on the front bracket of the ball bearing guide rails, and slide the disk enclosure into the cabinet
along the ball bearing guide rails (no manual alignment is required because the inner rail automatically
connects to the middle rail).
2e Installing storage devices into the cabinet
To avoid device damage, do not stack any components but install them onto guide rails.
If you remove controllers and disks to facilitate the movement and installation of the device, record the mapping
between each component and its slot in advance. That helps insert each component back to its correct slot after
the movement and installation. If the controller is inserted into a different location, a system power-on failure may
occur.
NOTICE
10
2f Installing a cable tray
(1) Insert the cable tray into the ball bearing guide rails and the high-density disk enclosure.
(2) Use a Phillips screwdriver to fasten M6 screws to secure the cable tray.
(3) Install the spring pins to cable trays to secure the cable tray.
Other manuals for OceanStor V3 Series
2
This manual suits for next models
5
Table of contents
Other Huawei Storage manuals
Huawei
Huawei FusionModule1000A20 User manual
Huawei
Huawei FusionModule500 User manual
Huawei
Huawei LUNA2000-200KWH-2H1 Smart String ESS User manual
Huawei
Huawei OceanStor S2600 Instructions for use
Huawei
Huawei OceanStor Dorado V3 Series User manual
Huawei
Huawei OceanStor Dorado V3 Series Use and care manual
Huawei
Huawei OceanStor S2600 Installation manual
Huawei
Huawei OceanStor 2000 V3 Series Specification sheet
Huawei
Huawei FusionModule5000 Operating manual
Huawei
Huawei EG602 User manual
Huawei
Huawei OceanStor 5300 V5 User manual
Huawei
Huawei OceanStor 2000 V3 Series Specification sheet
Huawei
Huawei 3 U User manual
Huawei
Huawei FusionModule1000A20 User manual
Huawei
Huawei ES3000 V5 User manual
Huawei
Huawei OceanStor HVS85T User manual
Huawei
Huawei OceanStor 5110F V5 User manual
Huawei
Huawei E180 User manual
Huawei
Huawei FusionDC1000A User manual
Huawei
Huawei E618 User manual
