Huawei E180 User manual

No part of this document may be reproduced or transmitted in any form or by any means without

prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their

respective holders.

Notice

The information in this document is subject to change without notice. Every effort has been made in

the preparation of this document to ensure accuracy of the contents, but all statements,

information, and recommendations in this document do not constitute the warranty of any kind,

express or implied.

Table of Contents

Getting to Know the E180..................................................................................................1

Requirements for the PC.....................................................................................................3

Preparing the E180.............................................................................................................4

Installation Guide ...............................................................................................................5

Safety Information..............................................................................................................8

Thank you for purchasing Mobile Broadband E180 HSPA Rotate

USB Stick (hereinafter referred to as the E180).

Note:

This manual briefly the preparation, the process for installing/uninstalling, and safety

precautions for using Huawei E180 HSPA Rotate USB Stick (hereinafter referred to as the E180).

You are recommended to read the manual before using the E180.

Getting to Know the E180

The following figures show the appearance of the E180. The actual product may differ.

Micro SD card slot

Holds the Micro SD card.

USIM/SIM card slot

Holds the USIM/SIM card.

Rotatable USB connector

Connects to the USB interface of the PC.

Indicator

Indicates the status of the E180.

Green, blinking twice every 3s: The E180 is powered on.

Green, blinking once every 3s: The E180 is registered to the GSM/GPRS/EDGE network.

Blue, blinking once every 3s: The E180 is registered to the WCDMA/HSDPA/HSUPA network.

Green, always on: The GPRS/EDGE connection is set up.

Blue, always on: The WCDMA connection is set up.

Cyan, always on: The HSDPA/HSUPA connection is set up.

Off: The E180 is removed from the PC.

Requirements for the PC

To use the E180, the PC must meet the following requirements:

Standard USB interface

Windows 2000 SP4, Windows XP SP2, Windows Vista.

The hardware of your PC must meet or exceed the recommended system requirements for the

installed version of OS.

Display resolution: 800 × 600 or above.

Preparing the E180

1. Take out of the back cover of the E180.

2. Insert the USIM/SIM card and the micro SD card into the card slots. Make sure that the card is

properly inserted.

Note:

Micro SD card is an optional accessory. If the micro SD card is not provided in the package, you

can buy one yourself.

Do not remove the USIM/SIM card and the micro SD card when they are being used. Removing

the cards during an operation may damage the cards as well as the device, and data stored on

the cards may be corrupted.

Installation Guide

The procedure for installing the management program depends on the operating system installed

on your PC. The following section takes Windows XP as an example.

Connecting the E180 with a PC

Note: Power on your PC before connecting the E180 with the PC. Otherwise, the normal installation

of the E180 may be affected.

One way: Plug the E180 into the USB interface of the PC.

The other way: connect the E180 to a PC using the USB extension cable.

Installing the E180 Management Program

1. Connect the E180 with the PC.

2. The OS automatically detects and recognizes new hardware and starts the installation wizard.

Note: If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then

double-click AutoRun.exe to run the program.

3. Follow the prompts of the installation wizard.

4. After the program is installed, the shortcut icon of the management program is displayed on

the desktop.

Launching the Management Program

After the E180 is installed, the management program is launched automatically. Then every time the

E180 is connected to the PC, the management program is launched automatically.

You can also double-click the shortcut icon on the desktop to launch the management program.

Uninstalling the Management Program

1. Choose Start > Control Panel.

2. Find the management program, and click Add/Remove Program to uninstall the management

program.

Note: It is recommended to restart the PC after the uninstallation to ensure that the management

program is completely uninstalled.

Removing the E180

1. Double-click in the system tray. The Unplug or Eject Hardware interface is displayed.

2. Select the hardware related to the E180 and click Stop.

3. When the prompt "It is safe to remove the device" is displayed, remove the E180.

Note: Before removing the E180, exit the management program.

Safety Information

Read the safety information carefully to ensure the correct and safe use of your wireless device.

Interference

Do not use your wireless device if using the device is prohibited or when it causes danger or it

interferes with electric devices.

Medical Device

Do not use your wireless device and follow the rules and regulations set forth by the hospitals

and health care facilities.

Some wireless devices may affect the performance of the hearing aids. For any such problems,

consult your service provider.

If you are using an electronic medical device, consult the doctor or device manufacturer to

confirm whether the radio wave affects the operation of this device.

Area with Inflammables and Explosives

To prevent explosions and fires in areas that are stored with inflammable and explosive devices, do

not use your wireless device and observe the rules. Areas stored with inflammables and explosives

include but are not limited to the following:

Gas station

Fuel depot (such as the bunk below the deck of a ship)

Container/Vehicle for storing or transporting fuels or chemical products

Area where the air contains chemical substances and particles (such as granule, dust, or metal

powder)

Area indicated with the "Explosives" sign

Other manuals for E180

Table of contents

Other Huawei Storage manuals

Huawei

Huawei OceanStor V5 Series Use and care manual

Huawei

Huawei N2000H V3 User manual

Huawei

Huawei EG602 User manual

Huawei

Huawei ES3000 V5 User manual

Huawei

Huawei LUNA2000-5-NHS0 User manual

Huawei

Huawei OceanStor CloudStor CSE User manual

Huawei

Huawei OceanStor 5110F V5 User manual

Huawei

Huawei E3131s Installation guide

Huawei

Huawei PowerCube 1000 User manual

Huawei

Huawei OceanStor T Series User manual

Huawei

Huawei FusionDC1000A User manual

Huawei

Huawei OceanStor 2600 V3 Video Surveillance Edition User manual

Huawei

Huawei OceanStor 2000 V3 Series Specification sheet

Huawei

Huawei FusionModule500 User manual

Huawei

Huawei E180 User manual

Huawei

Huawei FusionModule2000 V500R003C10 Technical specifications

Huawei

Huawei E182E HSPA+ User manual

Huawei

Huawei 3 U User manual

Huawei

Huawei FusionModule1000A20 User manual

Huawei

Huawei FusionModule1000A40 ICT Solution User manual

Huawei

Huawei FusionModule1000A20 Operating manual

Huawei

Huawei IDS1000-A Operating manual

Huawei

Huawei OceanStor Dorado V3 Series User manual

Huawei

Huawei OceanStor 2600 V3 Video Surveillance Edition Technical specifications

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide