Huawei EG8040F5 User manual
EG8040F5
Quick Start
Issue 02
Date 2019-09-10
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. i
Contents
1 Placing the Device......................................................................................................................... 1
2 Connecting Cables.........................................................................................................................3
3 Indicator Description....................................................................................................................5
4 Technical Specifications...............................................................................................................6
5 FAQs.................................................................................................................................................7
EG8040F5
Quick Start Contents
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. ii
1 Placing the Device
NOTE
lDo not install the ONT outdoors or in an outdoor cabinet.
lThe ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in other modes,
such as ceiling.
lKeep 10 cm clearance on all sides to ensure adequate ventilation.
lIt is recommended that the computer and ONT be put far away from electric appliances that generate
strong magnetic or electric fields, such as microwave ovens.
Mounting an ONT on the desk
The figure below shows an ONT that is horizontally placed on a desk.
NOTE
The appearance shown in this document may be different from the actual appearance of the product. The
actual product prevails.
EG8040F5
Quick Start 1 Placing the Device
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. 1
Mounting an ONT onto the wall
1. Mark two positions with the same spacing as that between the two mounting holes of the
ONT using a marker on a wall.
2. Select a proper drill bit according to the outer diameter of the screws. Use a hammer drill
to drill the marked positions on the wall. Then clean the holes and install two expansion
bolts.
3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out
of the wall, and mount the ONT onto the screws.
NOTE
It is recommended that the screw be about 4 mm in diameter and longer than 20 mm.
EG8040F5
Quick Start 1 Placing the Device
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. 2
2 Connecting Cables
NOTE
lThe fiber connector connected to the optical port on the wall varies depending on actual conditions.
lTo ensure normal use of fibers, make sure that the fiber bending radius is larger than 30 mm.
EG8040F5
Quick Start 2 Connecting Cables
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. 3
No. Item Description
1 Power Connects to a power adapter.
2 LAN1-LAN4 Connects to PCs or IP set-top boxes (STBs).
3 PON The optical port is equipped with a rubber plug and connected
to a fiber for upstream transmission.
The type of the optical connector connected to the optical port
can be SC/APC.
4 Reset Press the button for a short time to reset the device; or press
the button for a long time (longer than 10s) to restore the
device to the default settings and reset the device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to
access the Internet. If an ONT cannot access the Internet after a reset,
contact your Internet service provider.
EG8040F5
Quick Start 2 Connecting Cables
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. 4
3 Indicator Description
Indicator Status Description
Power Steady on The ONT is powered on.
Off The power supply is cut off.
PON Steady blue Optical signals are received normally, and the ONT is
registered with the OLT or is authorized successfully.
Blinking blue Optical signals are received normally, and the ONT is
registering with the OLT.
Steady red The optical module of the PON port is powered off.
Blinking red The optical power is lower than the receiver sensitivity.
Internet Steady blue The Internet access service is normal.
Off The system is not powered on or the Internet access
service has not taken effect.
EG8040F5
Quick Start 3 Indicator Description
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. 5
4 Technical Specifications
Product Function
EG8040F5 4 Ethernet ports ( 1GE+3FE)
lPower adapter input: See the nameplate on the adapter.
lSystem power supply: See the nameplate on the device.
lAmbient temperature: 0ºC to +40ºC
lAmbient humidity: 5%–95% (non-condensing)
lDimensions (H x W x D): 145mm x 97mm x 32 mm
lWeight: About 140g
lMaximum system power consumption: 5 W
EG8040F5
Quick Start 4 Technical Specifications
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. 6
5 FAQs
NOTE
The following web page is only for reference. The actual web page of the product prevails.
How do I log in to the Huawei ONT web page?
1. Use a network cable to connect a PC to the Huawei ONT.
2. Set the IP address of the PC in the same subnet as the web address of the Huawei ONT.
For example, if the web address of the Huawei ONT is 192.168.100.1 (for the web
address of the Huawei ONT, see the product nameplate), set the IP address of the PC to
192.168.100.100.
EG8040F5
Quick Start 5 FAQs
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. 7
Table of contents
Other Huawei Network Hardware manuals
Huawei
Huawei NE-HIC-2xSTM1/POS-SFP User manual
Huawei
Huawei HG8245W5 User manual
Huawei
Huawei IdeaShare Key User manual
Huawei
Huawei CR-P2HM User manual
Huawei
Huawei OptiX OSN 8800 Guide
Huawei
Huawei OptiXstar EN8245X6s-8N User manual
Huawei
Huawei eSpace IAD104H User manual
Huawei
Huawei OptiX RTN 910A User manual
Huawei
Huawei VCN520 User manual
Huawei
Huawei PDU8000 Series User manual
Huawei
Huawei SUN2000-50KTL-ZHM3 User manual
Huawei
Huawei FIC-1/2ADSL User manual
Huawei
Huawei E5785-320a Technical specifications
Huawei
Huawei 21501043-003 User manual
Huawei
Huawei BYPASS OP9000 User manual
Huawei
Huawei CR52-2xPOS/STM16-SFP User manual
Huawei
Huawei TP48200A-HT19C4-1 User manual
Huawei
Huawei CZ36E-20Z User manual
Huawei
Huawei SUN2000-15KTL-50KTL Series User manual
Huawei
Huawei RTN510 User manual
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
