HP Surestore Tape Library Model 10/180 User manual

313670504 (Rev D) 1

Installing the Web-Based Library Administrator

Requirements Before installing the Web-Based Library Administrator,

verify that the following requirements are met:

• Library is powered on and initialized

• Minimum requirements: 200MHz processor; 64 MB

RAM (96 MB RAM is preferred)

• Microcode level 3.01 or later is loaded.

Microcode level 3.01 contains the Web-Based Library

Administrator software.

• Java™ Plug-in Software 1.4 or later

You can download the Java plug-in from:

http://java.sun.com/products/plugin

• Netscape Navigator 4.5 or later or Internet Explorer 4.0

or later with the latest Service Pack

Procedures The following steps must be performed in the order in

which they are presented to successfully install the

Web-Based Library Administrator.

Note: You must know the IP Address of your library before

you perform the following steps.

313670504 (Rev D) 2

Step 1 Ensure the library is powered on and initialized.

Step 2 Connect your Ethernet cable to the ENET connector on the

electronics module bulkhead.

This allows you to communicate with the Web-Based

Library Administrator.

See Figures 1 and 2 for the connection diagram.

Step 3 Set up yourInternet Protocol (IP) Address from the Operator

Panel.

After you have powered on or reset the library, the library

performs a reset. When the reset is complete, the Operator

Panel displays a status screen.

a. Press MENU.

The MAIN MENU is displayed.

b. Arrow to CONFIGURATION and press SELECT.

The CONFIGURATION MENU is displayed.

c. Arrow to NETWORK CONFIG and press SELECT.

The NETWORK CONFIG MENU is displayed.

d. Arrow to IP ADDRESS and press SELECT.

An edit window is displayed.

Follow the directions on the Operator Panel for

entering and saving data.

e. Press MENU.

f. Perform a reset to save the changes.

Step 4 Set up your Subnet Mask from the Operator Panel.

313670504 (Rev D) 3

You need to ask your System Administrator for this number.

a. Press MENU.

The NETWORK CONFIG MENU is displayed.

b. Arrow to SUBNET MASK and press SELECT.

An edit window is displayed.

Follow the directions on the Operator Panel for

entering and saving data.

c. Press MENU.

The NETWORK CONFIG MENU is displayed with

the information you entered.

d. Perform a reset to save the changes.

Step 5 Set up your Library Name from the Operator Panel.

The library name is aliased to the IP Address by your

Network Administrator.

An alias is the logical mapping created between the library

and its IP Address.

a. Press MENU.

The NETWORK CONFIG MENU is displayed.

b. Arrow to LIBRARY NAME and press SELECT.

An edit window is displayed.

Follow the directions on the Operator Panel for

entering and saving data.

c. Press MENU.

The NETWORK CONFIG MENU is displayed with

the information you entered.

313670504 (Rev D) 4

d. Perform a reset to save the changes.

Step 6 Set up your Network Gateway from the Operator Panel.

This allows you to link to different networks.

You need to ask your System Administrator for this number.

a. Press MENU.

The NETWORK CONFIG MENU is displayed.

b. Arrow to NETWORK GATEWAY and press SELECT.

An edit window is displayed.

Follow the directions on the Operator Panel for

entering and saving data.

c. Press MENU.

The NETWORK CONFIG MENU is displayed with

the information you entered.

d. Perform a reset to save the changes.

Step 7 - optional Configure the Java Plug-in for code download to the library

Note: This step is required only if you wish to enable code

downloads from the web interface. You must have loaded

the Java Plug-in 1.4 or later.

a. Launch the Java Policytool.

The Java policytool should be located in the Java

installation directory. The file is called:

policytool in UNIX

policytool.exe in Microsoft®Windows®

313670504 (Rev D) 5

b. Write down the policy name and click OK if an error

dialog box is displayed stating it “Could not find the

Policy File”.

This policy name is used later in this procedure.

Add the Policy:

a. Click Add Policy Entry button.

The Policy Entry window is displayed.

b. Type:

http://<library IP>/libconnect.jar in the CodeBase

field, where library IP is the 12-digit library IP address

(Example: 123.456.789.012) or domain name.

Note: You must enter one policy entry for each library

you wish to access.

c. Click Add Permission button.

The Permissions window is displayed.

d. Pull down the Permission combo box and select

FilePermission.

e. Type the path/name of the file to be downloaded in the

TargetName field.

Example: c:\temp\release.prm

Note: Ensure you use path separators that are

appropriate for your operating system. They are:

/ for Unix

\ for Microsoft Windows

f. Pull down the Actions combo box and select read.

g. Click OK.

313670504 (Rev D) 6

The Policy Entry window is displayed with the

information you entered.

h. Click Done.

The Policy Tool window is displayed with the

CodeBase you entered.

i. Save the new policy name to disk by selecting one of

the following:

- If an error dialog box was displayed when you

launched the Policy Tool:

1. Pull down the File menu and click Save As.

2. Type the name of the policy name you wrote down

when you launched the Policy Tool.

Note: Ensure you use path separators that are

appropriate for your operating system. They are:

/ for Unix

\ for Microsoft Windows

- If an error box was not displayed:

1. Pull down the File menu.

2. Click Save.

j. Pull down the File menu and click Exit.

313670504 (Rev D) 7

Step 8 Perform a ping to ensure the IP Address is correct.

To do this in Windows:

a. Go to the Windows Start Menu.

b. Select Start -> Run.

c. Enter ping <library name or IP Address> in the

Start->Run text field.

To do this in UNIX:

–Enter ping <library name or IP Address> from the

command line.

Step 9 Start the Web-Based Library Administrator by accessing

NetscapeorInternet Explorer andenteringyourlibraryname

or IP address at the address bar.

313670504 (Rev D) 8

Figure 1

10/180 Tape Library

1. Enet (Ethernet connection)

C24421

313670504 (Rev D) 9

Figure 2

20/700 Tape Library

1. Enet (Ethernet connection)

C24422

313670504 (Rev D) 10

Other manuals for Surestore Tape Library Model 10/180

This manual suits for next models

Other HP Software manuals

HP VL400 - Vectra - 64 MB RAM Service manual

HP BladeSystem bc2000 - Blade PC Service manual

HP PCL 5 User manual

HP Brio BA200 User manual

HP C7791C - DesignJet 130 Color Inkjet Printer Configuration guide

HP OmniBook 2100 User manual

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Instruction Manual

HP StorageWorks 2/64 - Core Switch Service manual

HP Data Protector A.06.11 Quick setup guide

HP ProCurve J8766A Instruction Manual

HP T5700 - compaq thin client User manual

HP BladeSystem Dual NC370i - Multifunction Network... User manual

HP HP-UX 11i Service manual

HP HPE XP P9500 User manual

HP 413742-001 User manual

HP dc5750 - Microtower PC User manual

HP Data Protector A.06.11 Quick setup guide

HP Tc4100 - Server - 256 MB RAM Quick start guide

HP Brocade 8/24c Instruction Manual

HP ProBook 6445b - Notebook PC User manual

HP AJ765A - StorageWorks RDX Removable Disk Backup... Instruction Manual

HP Integrity Superdome 2 User manual

HP BL680c - ProLiant - G5 User manual

Popular Software manuals by other brands

COMPRO

COMPRO COMPROFM manual

Muratec

Muratec OFFICEBRIDGE ONLINE user guide

Oracle

Oracle Contact Center Anywhere 8.1 installation guide

Adobe

Adobe 65007312 - Photoshop Lightroom Programmer's guide

Avaya

Avaya NULL One-X for RIM Blackberry user guide

PS Audio

PS Audio PowerPlay Programming manual

Brady

Brady LOCKOUT PRO 3.0 Administrator's guide

Avaya

Avaya Interaction Center user guide

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Guide book

Novell

Novell GROUPWISE 8 - INTERNET AGENT manual

Oracle

Oracle Application 9i Configuration guide

Acer

Acer RDM user guide

Canon

Canon Vixia HF21 instruction manual

Canon

Canon ZR950 instruction manual

Samsung

Samsung Auto Backup user manual

Polycom

Polycom Vortex EF2201 Application note

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c user manual

Novell

Novell SP2 - S release note