HP C7791C - DesignJet 130 Color Inkjet Printer Configuration guide
HP LF Printing Knowledge Center
Printing in Black&White
Application: Adobe Photoshop CS
Printer: HP Designjet 30/90/130 series
Software: HP Driver
Operating System: Mac OS X
The simplest approach to creating a black and white image is taking a color image and converting it
to grayscale in a photo imaging program such as Photoshop. In addition, although converting an
image from color to grayscale is easy, the opposite operation is complex, in this case it is better to
have it in color. If your image is already converted, you only have to bypass the section 5.
Gray reproduction is dependant on various factors and/or environmental conditions, these conditions
can cause the gray to appear as if it has different colored tones. For this reason we have created
multiple profiles that match many different environmental conditions, so that you can choose the exact
gray reproduction you prefer. Therefore, if you follow this guide instructions and you have problems
with the gray neutrality, please consult the next document which explains this new solution:
Black & White Profile Selection (Photoshop and 30/90/130 driver).
1. First recommendations:
•See the Media type functionality & features and choose the most appropriate media.
•It is essential to have the media type correctly calibrated with this printer and print mode,
consult the Calibrate my printer document.
2. Open Adobe Photoshop CS.
3. Configure the Color Settings, Photoshop menu > Color Settings…:
•Make sure the Advanced Mode check box is ticked.
•Working Space > RGB: Adobe RGB (1998).
•Working Space > CMYK: Euroscale Coated v2 (for Europe), U.S. Web Coated (SWOP)
v2 (for US) and Japan Standard v2 (for Japan).
•Working Space > Gray: Dot Gain 30%.
•Color Management Policies: Preserve Embedded Profiles.
•Profile Mismatches: check Ask When Opening and Ask When Pasting.
•Missing Profiles: check Ask When Opening.
•Conversion Options > Intent: Perceptual.
2
•Click OK.
4. Open the image, File menu > Open…:
•If the document has an embedded color profile that does not match the current working
space, select Use the embedded profile. Otherwise, select Assign working space.
3
•Click OK.
5. Convert the image to grayscale. We present you two ways to perform the conversion, choose the
best one for you:
a) Let Photoshop do the conversion, Image menu > Mode > Grayscale.
b) You can choose the percentage contribution from each color channel when creating the gray
image: Image mode > Adjustments > Channel Mixer:
•Check Monochrome.
•Drag any source channel's slider to the left to decrease the channel's contribution to the
output channel or to the right to increase it, or enter a value between -200% and +200%
in the text box. Using a negative value inverts the source channel before adding it to the
output channel.
•Drag the slider or enter a value for the Constant option. This option adds a black or
white channel of varying opacity, negative values act as a black channel, positive values
act as a white channel.
•Click OK.
4
6. Adobe Photoshop Print with Preview… settings, File menu > Print with Preview…:
•Page Setup:
oFormat for: Select the printer (ex. hp designjet 130).
oPaper Size: Select the paper size of the media loaded on the printer.
oOrientation: Select the orientation of your image on the paper.
oClick OK.
•Set the Position and the Scaled Print Size you need.
•Check Show More Options.
•Select the Color Management tab:
oSource Space: Document.
oPrint Space Profile: Select the profile of the printer and media type you will use to
print.
oIntent: Perceptual.
7. Driver Settings; Print…:
•Printer: Select the printer (ex. hp designjet 130).
•Paper Type/Quality > Paper tab:
oPaper Type: Select the media type that is loaded on the printer (same settings
selected in Photoshop Print Space Profile, always calibrated).
oQuality: Best.
oColor: Application Managed Colors.
5
•Click Print.
As we have said, if you have followed the instructions and you have problems with the gray
neutrality, please consult next document:
Black & White Profile Selection (Photoshop and 30/90/130 driver).
6
For more information on HP Designjet products
www.hp.com/go/designjet
7
© 2005 Hewlett-Packard Development Company, L.P. The information contained
herein is subject to change without notice. The only warranties for HP products and
services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
Adobe Photoshop and PostScript are trademarks of Adobe Systems Incorporated.
PANTONE is Pantone, Inc.'s check-standard trademark for color.
Rev. 1.0, 09/2005
Other manuals for C7791C - DesignJet 130 Color Inkjet Printer
13
This manual suits for next models
2
Table of contents
Other HP Software manuals
HP
HP Surestore Disk Array 12h - And FC60 Reference manual
HP
HP Media Center m1000 - Desktop PC Quick start guide
HP
HP Data Protector A.06.11 User manual
HP
HP ProBook 6445b - Notebook PC User manual
HP
HP ProLiant xw25p User manual
HP
HP HPE XP P9500 Instruction Manual
HP
HP BL680c - ProLiant - G5 User manual
HP
HP HPE XP P9500 Instruction Manual
HP
HP BB118BV - StorageWorks Data Protector Express... User manual
HP
HP Workstation zx6000 How to use
HP
HP ProLiant ML310 Generation 5p User manual
HP
HP T5145 - Thin Client - Tower Service manual
HP
HP C7791C - DesignJet 130 Color Inkjet Printer Configuration guide
HP
HP J3111A - JetDirect 600N Network Card Instruction Manual
HP
HP PROCURVE 2520 User manual
HP
HP 8/20q Instruction Manual
HP
HP 500 G2 Safety guide
HP
HP ProLiant DL320e User manual
HP
HP Pro 3130 MT User manual
HP
HP HPE XP P9500 User manual
