HP 205H-MNT2 User manual

205H-MNT2 Wall Mount Kit

Installation Guide

0511763-03 | March 2015 1

Package Contents

Dual Gang Wall Mount

(x4) #6-32 Machine Screws

Plastic Front Cover

(x2) T8H Torx Security Screw

205H-MNT2 Wall Mount Kit Installation Guide

Introduction

The 205H-MNT2 Wall Mount Kit provides a secure and practical solution for mounting the 205H access

point to single and dual gang wall boxes.

Installing the 205H-MNT2 Wall Mount Kit

Use the following instructions to install the 205H-MNT2 Wall Mount Kit.

1. If the wall box is not already exposed, unscrew and remove the existing wall plate, as shown in Figure 1.

Figure 1 Removing Existing Wall Plate

2. Detach any RJ-45 cables by unclipping the connectors from the wall plate, or cutting/removing the UTP

cable(s).

3. Use a short Ethernet cable (sold separately, part number AP-CBL-ETH10) to connect the E0 port to an

RJ-45 connector, or crimp an RJ-45 plug (not supplied) to the cable, and insert into the E0 port. Do the

same for the PT port if used.

2205H-MNT2 Wall Mount Kit | Installation Guide

Installation for Single Gang Wall Box

If mounting the 205H-MNT2 Wall Mount Kit to a single gang wall box, refer to steps 4-5.

4. Align the screw holes on the mounting bracket with the corresponding holes on the single gang wall box,

as indicated in Figure 2.

Figure 2 Attaching Wall Mount to Single Gang Wall Box

5. Remove the #6-32 x 1 machine screws from their bag and screw the wall mount onto the wall box.

Installation for Dual Gang Wall

If mounting the 205H-MNT2 Wall Mount Kit to a dual gang wall box, refer to steps 6-7.

6. Align the screw holes on the mounting bracket with the corresponding holes on the dual gang wall box,

as indicated in Figure 3.

Figure 3 Attaching Wall Mount to Dual Gang Wall Box

205H-MNT2 Wall Mount Kit | Installation Guide 3

7. Remove the #6-32 screws from their bag and screw the wall mount onto the wall box, as shown in Figure

8. Connect any required cables to the rear of the access point.

9. Align the mounting slots on the back of your 205H access point with the corresponding posts on the wall

mount as shown in Figure 4.

Figure 4 Securing 205H access point to Wall Mount

10. Push the access point against the holes and then downward until the posts engage the slots at the top of

the mounting holes.

11. (Optional) Using the second T8H Torx security screw provided, insert into the hole on the upper-right

side of the mount and tighten to lock the 205H access point into the mount.

12. Position the prongs on the back of the front cover inside the slots on the front mount housing, as shown

in Figure 5.

Figure 5 Fitting Front Cover onto Wall Mount

0511763-03 205H-MNT2 Wall Mount Kit | Installation Guide

13. Slide the cover into the tracks toward the access point until the left side of the cover is level with the

side of the mount. Refer to Figure 6, demonstrating the cover sliding from open position (left) to locked

position (right).

Figure 6 Plastic Side Cover Sliding into Wall Mount (Rear View)

14. (Optional) Once the front cover is securely attached to the mount, insert one of the T8H Torx Security

Screw into the hole located at the left side of the cover and tighten until secure.

15. (Optional) If not using PoE, connect the AC-DC power adapter (sold separately, part number AP-CBL-

SER) to the DC power socket located on the right of the 205H access point.

Table of contents

Other HP Network Hardware manuals

HP IBRIX X9720 Service manual

HP Bc1500 - BladeSystem - Blade PC Manual

HP Ethernet Network Interface Card hn230e User manual

HP HSR6602-G Installation instructions

HP StorageWorks X1000 G2 How to use

HP ProCurve Networking J8451A User manual

HP 226824-001 - ProLiant - ML750 Reference manual

HP AdvanceNet 30244M Manual

HP Mv2120 - Media Vault Network Drive User manual

HP E-MSM466-R Assembly instructions

HP ProCurve Radio Port 230 Assembly instructions

HP c-Class Installation guide

HP StorageWorks HA-Fabric Manager User manual

HP FF 12904E Installation instructions

HP AJ878A - StorageWorks 320 GB Hard Drive User manual

HP 800 Series User manual

HP A5920AF-24XG Bk(pwr)-Frt(prt) Assembly instructions

HP procurve radio port 220 User manual

HP JG602A User manual

HP MSR954 Series Assembly instructions

HP IBRIX X9000 User manual

HP 5500-24G-SFP EI TAA Assembly instructions

HP X1800sb G2 User instructions

HP 16-port SCS User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide