Hoover HBWS 49D2ACE User manual

Thank you for choosing this product.

We are proud to offer the ideal product for

you and the best complete range of home

appliances for your daily routine.

Carefully read this manual for correct and

safe appliance use and for helpful tips on

efficient maintenance.

Only use the washing

machine after

carefully reading these instructions. We

recommend you always keep this manual on

hand and in good condition for any future

owners.

Each product is identified by a unique 16-

character code, also called the “serial

number”, printed on the sticker. This can be

found inside the door opening. This code is

a unique code for your product that you will

need to

you need to contact the Customer Service

Centre.

This appliance is marked according to

the European directive 2012/19/EU

on Waste Electrical and Electronic

Equipment (WEEE).

WEEE contains both polluting substances (which

can cause negative consequences for the

environment) and basic components (which can

be re

used). It is important to have WEEE

subjected to specific treatments, in order to

remove and dispose properly all pollutants, and

recover and recycle all materials. Individuals can

play an important role in ensuring that WEEE

does not become an environmental issue; it is

essential to follow some basic rules:



WEEE should not be treated as household

waste;



WEEE should be handed over to the relevant

collection points managed by the municipality or

by registered companies. In many countries, for

large WEEE, home collection could be present.

In many countries, when you buy a new

appliance, the old one may be returned to the

retailer who has to collect it free of charge on a

one

-to-

one basis, as long as the equipment is of

equivalent type and has the same functions as

the supplied equipment.

GENERAL SAFETY RULES

INSTALLATION

DETERGENT DRAWER

PRACTICAL HINTS

CLEANING AND MAINTENANCE

QUICK USER GUIDE

CONTROLS AND PROGRAMMES

TROUBLESHOOTING AND WARRANTY

Contents

Environmental conditions

FOR U.K. ONLY

On receipt of your appliance please

check it carefully for damage. Any

damage found must be reported

to the

delivery driver immediately.

Alternatively

damage found must be

reported to the retailer within 2 days of

receipt.

1. GENERAL SAFETY

RULES

This appliance is intended to

be used in household and

similar applications such as:

- Staff kitchen areas in shops, offices

and other working environments;

- Farm houses;

- By clients in hotels, motels and

other residential type environments;

- Bed and breakfast type environments.

A different use of this appliance

from household environment

or from typical housekeeping

functions, as commercial use by

expert or trained users, is excluded

even in the above applications. If

the appliance is used in a manner

inconsistent with this it may reduce

the life of the appliance and may

void the manufacturer’s warranty.

Any damage to the appliance or

other damage or loss arising

through use that is not consistent

with domestic or household use

(even if located in a domestic or

household environment) shall not

be accepted by the manufacturer to

the fullest extent permitted by law.

This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand the

hazards involved.

Children shall not play with the

appliance. Cleaning and user

maintenance shall not be made

by children without supervision.

Children should be supervised

to ensure that they do not play

with the appliance.

Children of less than 3 years

should be kept away unless

continuously supervised.



If the supply cord is damaged, it

must be replaced by a special

cord or assembly available from

the manufacturer or its service

agent.

Only use the hose-sets

supplied with the appliance for

the water supply connection

(do not reuse old hose-sets).



Water pressure must be between

0.05 MPa and 0.8 MPa.

Make sure carpets or rugs do

not obstruct the base or any of

the ventilation openings.

After installation, the appliance

must be positioned so that the

plug is accessible.

The maximum load capacity of

dry clothes depends on the

model used (see control panel).



To consult the product technical

specification please refer to the

manufacturer website.

The technical details (supply

voltage and power input) are

indicated on the product rating

plate



Make sure that the electrical

system is earthed, complies

with all applicable law and that

the (electricity) socket is

compatible with the plug of the

appliance. Otherwise, seek

qualified professional assistance.



The use of converters, multiple

sockets or extension cords is

strongly advised against



Before cleaning or maintaining

the washing machine, unplug

the appliance and turn off the

water tap.



Do not pull on the power cord

or appliance to unplug the

machine.



Make sure there is no water in

the drum before opening the

door.

Do not expose the washing

machine to rain, direct sunlight

or other weather elements.

Protect from possible freezing.

When moving, do not lift the

washing machine by the knobs

or detergent drawer; during

transport, never rest the door on

the trolley. We recommend two

people lift the washing machine.

In the event of fault and/or

malfunction, turn off the

washing machine, close the

water tap and do not tamper

with the appliance.

Immediately contact the

Customer Service Centre and

only use original spare parts.

Failure to observe these

instruction may jeopardise

appliance safety.

WARNING:

water may reach very high

temperatures during the

wash cycle.

Electrical connections and

safety instructions

2. INSTALLATION



Remove the

transportation

screws

(A)

on the back and

remove the

flat washers,

rubber bungs and plastic spacer

tubes

(B)

as illustrated

in figure 1



If the washing machine is

built

, unscrew the

transportation screws

(A)

and

remove the

flat washers,

rubber bungs and plastic spacer

tubes

(B)



During the removal of the screws

occasionally spacer tubes fall

inside the product, these can be

remove by tilting the product forward

and recovering

them from the floor

or inside the base of the machine.



Cover the open transportation screw

holes with the

plastic caps

included in the instruction bag.

WARNING:

keep packaging materials

away from children.



Position the template onto the

reverse of the furniture door. It

is possible to mount the hinges

and closure magnet on the right

or left-

hand side depending on

your requirements. Mark the

screw hole positions, then drill

out these positions.



Fix the

hinges in place with the

4 screws provided (A).



Fix the magnet (B)

in place

using screw (C).



Mount the plate (D)

on the right

or left-

hand side, depending on

your installation requirements.

Place the plastic support

(E)

under the plate and fix it in

position with screw (F).



Snap mount cap (G)

in the

lower position.

Instructions for mounting the

furniture door

Mount the furniture door to the

front of the washer using the

hinges. Fix the spacers (I)

place with the 2 screws (J)

and

then fix the hinges with 2 screw

(H).



lide the washer into an

opening of the size indicated in

the diagram opposite. A furniture

plinth may be run across the front

of the appliance, but its height will

be dictated by the height the

washer is set at.



The 4 adjustable feet allow the

height of

the washer to be

adjusted from 820 mm to a

maximum of 840 mm. To adjust

the height, you should remove

the nuts fitted to each foot and

replace these with the 5 mm

nuts supplied. Raise the feet to

your desired height and then

fully tighten the lock nut to

the

base of the washer.

We suggest mounting the

furniture door so that it opens

towards the left, which is the

same direction as the porthole

door. This will leave more

space when you are loading

washing into the appliance.



Connect the water hose to the water

supply tap (fig. 3)

only using the hose

supplied with the appliance (do not

reuse old hose-sets).



SOME MODELS

may include one or

more of the following features:



HOT&COLD (fig. 4):

water mains connection settings with hot

and cold water for higher energy savings.

Connect the grey tube to the cold water

tap

and the red one to the hot water

tap. The machine ca

n be connected to

the cold water tap only: in this case, some

programs may start a few minutes later.



AQUASTOP (fig. 5):

a device located on the supply tube that

stops water flow if the tube deteriorates;

in this case, a red mark will appear in the

window “A

” and the tube must be

replaced. To unscrew the nut, press the

one-way lock device "B".



AQUAPROTECT –

SUPPLY TUBE WITH

GUARD (fig. 6):

Should water leak from the primary

internal tube "A"

, the transparent

containment sheath "B

" will contain water

to permit the washing cycle to complete.

At the end of the cycle, contact the

Customer Service Centre to replace the

supply tube.

Hydraulic connections



The washing machine should be installed in

its final position such that the water fill hose

is not kinked or trapped. The corrugated

drain hose should be inserted into suitable

drain pipe of between 50 cm and 85 cm

heig

ht above the floor using the curved drain

hose support. If an under sink connection is

used the drain hose must be routed above

the sink overfill opening to prevent back

siphoning. Care must be taken to avoid

kinking or trapping the drain hose

(fig. 7)



Level the appliance using the feet as

illustrated in figure 8:

turn the nut clockwise to release the

screw;

rotate the foot to raise or lower it until it

touches to the floor;

lock the foot, screwing in the nut, until it

tightens against to the bottom of the

washing machine.



Plug in the appliance.

ACCESSORY SOLD SEPARATELY

WARNING:

contact the Customer Service Centre

should the power cord need

replacement.

Installation faults are not covered

the manufacturers warranty.

Setting

This manual suits for next models

Table of contents

Other Hoover Washer manuals

Hoover

Hoover ASM 160 User manual

Hoover

Hoover HP6 110M User manual

Hoover

Hoover SIX.Handwash 1200 AL120 User manual

Hoover

Hoover Performa Plus User manual

Hoover

Hoover H3W4 472DE/1-S User manual

Hoover

Hoover ONE PWR SPOTLESS GO User manual

Hoover

Hoover WDWFT4138AH User manual

Hoover

Hoover Vision HD VHD-812 User manual

Hoover

Hoover OPH 716 DF User manual

Hoover

Hoover A 089 User manual

Hoover

Hoover HV-LFL10 User manual

Hoover

Hoover HTV 913 Troubleshooting guide

Hoover

Hoover VT D2 User manual

Hoover

Hoover Nextra Programming manual

Hoover

Hoover OPH 147/2 User manual

Hoover

Hoover NDE C8TBBEX-S User manual

Hoover

Hoover HI 148 User manual

Hoover

Hoover DXO4 H7A2TCEX-S User manual

Hoover

Hoover Six.1100 AM 115 User manual

Hoover

Hoover HWDP610AMBC/1-S User manual

Hoover

Hoover Otsein DYN 9144 User manual

Hoover

Hoover SE234 User manual

Hoover

Hoover OPH 614 User manual

Hoover

Hoover H160I User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide