Honeywell T5+ User manual

T5+ Smart

Thermostat

Programmable

Thermostat

Quick Install Guide

For more information visit resideo.com

Mode

Menu Fan

Mode Fan

Heat Auto

Wake Away Home Sleep

Following Schedule

Search for local rebates: HoneywellHome.com/Rebates

2 3

Included in your box:

Screws and

anchors

UWP™

Mounting

System

(UWP)

T5 Smart

Thermostat

Quick Install

Guide

CWire Power Adapter

(Located under thermostat.

Open end of box to remove it. T5

Smart Thermostat models that

don’t show a +on the package

after “T5” do not have the C-wire

adapter in the box.)

2 3

Get the most from T5 Smart Thermostat

Multiple programming options that fit your lifestyle:

1. LocationBased scheduling – The thermostat uses your smartphone’s

location to know when you’re away, and saves you energy. Through

geofence technology, it senses your return and helps make you comfortable

upon arrival. You can always manually change your preset Home and Away

temperature either on the thermostat or on the Honeywell Home app.

2. Smart scheduling – Use a combination of geofencing and time scheduling

to fit your busy, active lifestyle.

3. TimeBased scheduling – Program your thermostat for one week; each day

(each day is a different schedule); MonFri, Sat, Sun; or MonFri, SatSun.

All days with four adjustable periods per day.

4. No scheduling – Control your comfort manually by adjusting temperature

set points only.

Smart Alerts. Push notifications remind you of filter changes and warn you of

extreme indoor temperatures.

Smart Response. Learns your heating and cooling system to deliver the opti-

mal temperature at the right time.

Auto Change From Heat to Cool. Automatically determine if your home needs

heating or cooling to provide maximum comfort.

Tools you will need:

You may need:

Wire stripper

Needle-nose pliers Drill and

drill bit

Smartphone

To install your

thermostat and

photograph existing

wiring.

Honeywell Home app

To conﬁgure your

system and connect to

your smartphone.

Small ﬂat head scr

ewdriver

Phillips scr

ewdriver

Pencil

velHome Wi-Fi

Password

4 5

Compatibility

• Compatible with most heating, cooling, and heat pump systems

• Required: 24 VAC power (“C” wire). CWire Power Adapter Included to provide

power if needed

• Does not work with electric baseboard heat (120240V)

• Does not work with mV systems

• Does not support input (S terminals) for indoor and outdoor sensors

• Does not support relay (U terminals) for ventilation

• Android or iOS smartphone, tablet, or device

For help, contact:

WEB resideo.com

PHONE 18006333991

SOCIAL Twitter: @Honeywell_Home, Facebook: Honeywell Home

CAUTION: MERCURY NOTICE

If this product is replacing a control that contains mercury in a sealed tube, do not place the old

control in the trash. Contact your local waste management authority for instructions regarding

recycling and proper disposal.

CAUTION: EQUIPMENT DAMAGE HAZARD

Compressor protection is bypassed during testing. To prevent equipment damage, avoid cycling the

compressor quickly.

CAUTION: ELECTRICAL HAZARD

Can cause electrical shock or equipment damage. Disconnect power before beginning installation.

REQUIRED: 24 VAC POWER (“C” WIRE)

CWire Power Adapter Included to provide power if needed.

6 7

Removing your old thermostat

2 Check that your system is off

Change the temperature on your old

thermostat. If you don’t hear the system

turn on within 5 minutes, the power

is off.

Note: If you have a digital thermostat

that has a blank display, skip this step.

1 Turn power OFF

To protect yourself and your equipment,

Turn off the power at the breaker box

or switch that controls your heating/

cooling system.

3 Remove your old thermostat from the

wall plate

On most thermostats, you can take off

the thermostat by grasping and gently

pulling. Some thermostats may have

screws, buttons, or clasps.

Do not remove any wires from your

thermostat at this time!

OFF

Breaker box

Switch

6 7

5 Take a picture of how your wiring

looks right now

Be sure to include the letters next

to the terminals where the wires

are inserted. This will be a helpful

reference when wiring your thermostat.

Tip: If the color of your wires has faded

or if 2 terminals have the same wire

color, use the wire labels provided in

the package to label each wire.

4 Make sure there are no

120/240V wires

Do you have thick black wires with

wire nuts?

Is your thermostat 120V or higher?

If you answered yes to either of these

questions, you have a line voltage

system and the thermostat will not

work.

If you are unsure visit:

resideo.com

6 Remove any jumpers

A jumper connects one terminal to

another terminal. It may look like a

small staple or even a colored wire and

must be removed before continuing.

Use a screwdriver to release wires from

terminals.

The thermostat does not

need jumpers.

YRRC

Example of

a jumper

Wire nut

Thick black wire

Terminals

1/4” to 3/8”

8 9

8 Write down the color of the wires

Check mark the wires that are connected to terminals. Next to the check mark,

write down the color of the wire. Do not include jumpers as a part of your count.

Check all that apply (Not all will apply):

Terminal Wire Color

7 Record if you have wires in the

following terminals

Do not include jumpers as a part

of your count. The thermostat does

not need jumpers.

Terminal Wire Color

A or L/A

O/B

W2 or AUX

Terminal Wire Color

S and U terminals are not supported with this thermostat.

If there are wires in terminals that are not listed, you will need additional wir-

ing support. Visit resideo.com to find out if the thermostat will work for you.

Required (see step 9)

8 9

10 Disconnect the wires and remove the old wall plate

Use a screwdriver to release wires from terminals.

Tip: To prevent wires from falling back into the wall,

wrap the wires around a pencil.

9 Do you see a wire connected to the C terminal?

If yes, skip to step 10.

If you do not see a C wire, proceed with the options below:

Option A - Finding the CWire:

There might be an extra wire pushed into the wall or

wrapped around the wire bundle. Gently pull the wire

bundle out of the wall to check for unused wires.

If you have an unused wire, connect that wire to the C

terminal on your new thermostat in step 13.

Connect the other end of the unused wire to the C

terminal on your heating/cooling system (or the zone

panel if your home uses more than one thermostat to

control temperature). Be sure any other wire(s) con-

nected to the C terminal stay securely connected

when you re-tighten the terminal.

Not all heating/cooling equipment use the C label for the 24 VAC common wire.

If your heating/cooling equipment does not have a C terminal, check the system

manual or contact the manufacturer to find out which terminal is the 24 VAC

common.

Complete installation by following the remaining steps in this guide.

Option B - Using the CWire Power Adapter:

If you do not have an unused wire in the wall, see the C Wire Adapter Installation

Guide included in the box. Open the top or bottom ﬂap of the box to locate the

C Wire Adapter.

Installing your T5 Smart Thermostat

T5 Smart Thermostat Screws

UWP

Mounting

System

Anchors Wall

Table of contents

Other Honeywell Thermostat manuals

Honeywell

Honeywell CT40A User manual

Honeywell

Honeywell TB7220 COMMERCIALPRO Operation manual

Honeywell

Honeywell TH6320WF01 User manual

Honeywell

Honeywell T8602 Instruction Manual

Honeywell

Honeywell VisionPRO TH8110U User manual

Honeywell

Honeywell Y9420H Sundial RF2 User manual

Honeywell

Honeywell FocusPRO 5000 User manual

Honeywell

Honeywell RTH7500 Series User manual

Honeywell

Honeywell VisionPRO TH8000 Series User manual

Honeywell

Honeywell Y6H920RW4026 User manual

Honeywell

Honeywell T9 User manual

Honeywell

Honeywell ATC928G3000 Instruction Manual

Honeywell

Honeywell VISIONPRO TH8321U1097 User manual

Honeywell

Honeywell The Round CT87N User manual

Honeywell

Honeywell TB6980 User manual

Honeywell

Honeywell PRO 1000 Series User manual

Honeywell

Honeywell T6 Pro Hydronic User manual

Honeywell

Honeywell T8112D Quick start guide

Honeywell

Honeywell TH5220D1003 - Digital Thermostat, 2h User manual

Honeywell

Honeywell RTHL3550 User manual

Honeywell

Honeywell Q539A User manual

Honeywell

Honeywell RTH2510Series User manual

Honeywell

Honeywell T10 Pro Smart User manual

Honeywell

Honeywell RTH8500WF User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide

Aube Technologies

Aube Technologies TH305 owner's guide

Powtier Controls

Powtier Controls 505MST instruction manual

Kanmor

Kanmor Zone Control 369e manual