Honeywell Le Sucre User manual
-English-
Le Sucre™
Quick Installation guide
Contents
MANDATORY STEPS TO FOLLOW BEFORE BEGINNING
YOUR INSTALLATION ................................................................2
STEP 1: Connecting Le Sucre...........................................................................2
STEP 2: Creating your account on Internet......................................................3
INSTALLING YOUR SYSTEM .....................................................4
Registering the « Badge Reader » ....................................................................8
Registering the badges......................................................................................9
Registering the Door Contact..........................................................................10
Registering the motion sensor........................................................................11
Installing other peripherals..............................................................................13
Finalizing the installation.................................................................................14
800-19460-A
10/2014
MANDATORY STEPS TO FOLLOW BEFORE BEGINNING YOUR
INSTALLATION
STEP 1: Connecting Le Sucre
Push the lock with the tool supplied to open the SIM card
compartment, and then pull out the SIM card holder.
Insert the SIM card in its holder as shown, and then replace the
holder in the central unit.
Slide off the battery cover, insert the batteries and replace the
cover.
Connect the power pack to the unit and a mains socket.
Note: Depending on the model, either a Jack or a USB connector is
used
2
WARNING
Before continuing, Le Sucre™ must be power supplied and the SIM Card must be
installed into Le Sucre™.
Please follow next steps to get Le Sucre™ ready.
STEP 2: Creating your account on Internet
1. Logon to the website https://tc20e.total-connect.eu
assword.
All fields with * are mandatory.
orm, check the case at the bottom of the page to agree to the Terms and
conditions and click on “Next”.
ge then appears: « Your account has been sucessfully activated ». Clik on the blue
button to continue.
2. Click on “Create user” to create your account. You will then be asked to enter a 20 digit long ID
code. This code is printed on a sticker located on Le Sucre.
3. You will then be able to choose your username and password used to login the system. You
will also be asked to enter a valid email to be contacted in case of problem or forgotten
p
Once you have completed the f
The following messa
3
A confirmation email will be sent to you reminding your login and password for the website.
Now you can log in you account through the main page of the website.
INSTALLING YOUR SYSTEM
fter logging in, the following message then appears:
1. he first step is to set your contacts: these are the people who will be notified by email when an
alarm or a problem occurs in your premises.
A
T
4
Up to three contacts can be set up. The first contact is usually yourself and is mandatory. The
second and third contacts are optional and can be skipped during the installation.
You have to use the international format when entering the contacts’ phone numbers.
™ remains totally fixed, you can set the phone number
corresponding to the SIM Card :
You have to use the international format when entering the SIM card phone number.
2. When the green light on Le Sucre
5
After typing the phone number and the provider's APN, click on the Next button.
The connection with Le Sucre™ begins
The connection may take several minutes. Once the connection is established you will see the green icon
at the top right of the page: .
6
The system is now in the installation mode
3. Wait for Le Sucre™ to be recognized by the Website and to be displayed on the screen as
shown below :
7
Y
ou can
Registeri
1.
2.
3.
Note:
now start to
ng the « Ba
d
Pull up the p
a
Badge Read
e
Fix the brac
k
3 screws. (s
c
Insert the 3
b
You will hea
r
install your
d
ge Reader
»
a
rt shown, a
n
e
r.
k
et to the wall
c
rews are not
b
atteries the r
r
3 short bee
p
devices and
»
n
d slide the b
r
using the ta
p
supplied)
ight way rou
n
p
s from the B
a
8
sensors:
r
acket off the
p
e provided o
n
d.
a
dge Reader
.
r with
.
4. Slide the Badge Reader onto its bracket.
The badge reader plays a series of beeps and then 3 fast beeps. The Website shows the detection of the
new peripheral with the message in the upper strip:”New Material incoming… ”
Wait for the badge reader to appear in the “Sensors and peripherals” section as shown below:
Set the location and the name you want to give to it : here the name is “Keypad” and the location is
“Entrance”.
Warning : To validate the name field you have to click elsewhere on the screen with the mouse.
The badge reader is now saved and registered on your system.
Registering the badges
To register the first Badge, present it at the front centre of the Badge reader until you hear a beep. The
Badge appears in the “Keyfobs and badges” section.
You can now set the owner’s name in the field next to the Badge serial number. Register the next Badge
the same way.
Here both “John” and “Sandy” ‘s badges have been registered.
9
The badges are now saved and registered on your system.
Registering the Door Contact
1. Pull out the black piece on the door contact as shown
on the picture
2. Fix the door contact and the magnet using the double-
sided tape. Mount the magnet (smallest piece) on the
moving part of the door while the door contact is
mounted on the fixed part of the door.
10
Other manuals for Le Sucre
1
Table of contents
Languages:
Other Honeywell Security System manuals
Honeywell
Honeywell Fire-Lite Alarms W-BG12LX(A) User manual
Honeywell
Honeywell Accenta Series Quick start guide
Honeywell
Honeywell Home SI800MS User manual
Honeywell
Honeywell proX1 User manual
Honeywell
Honeywell ADEMCO VISTA-12A Assembly instructions
Honeywell
Honeywell Lynx Plus Series User manual
Honeywell
Honeywell AlarmNet 7845GSM User manual
Honeywell
Honeywell ADEMCO 4110XM User manual
Honeywell
Honeywell VISTA-20PSeries User manual
Honeywell
Honeywell 5800WAVE - Ademco Wireless Siren Assembly instructions
Honeywell
Honeywell LXL-1000 User manual
Honeywell
Honeywell TCPA1BS User manual
Honeywell
Honeywell ADEMCO VISTA-48A User manual
Honeywell
Honeywell VISTA-128FBP User manual
Honeywell
Honeywell VISTA-128FBPT User manual
Honeywell
Honeywell ADEMCO VISTA-15PSIA Assembly instructions
Honeywell
Honeywell 4219 User manual
Honeywell
Honeywell Galaxy 8 User manual
Honeywell
Honeywell ADEMCO VISTA-40 User manual
Honeywell
Honeywell Friedland HISK1 User manual
Popular Security System manuals by other brands
EDM
EDM Solution 6+6 Wireless-AE installation manual
Highway Safety Group
Highway Safety Group EA401 user manual
Siren
Siren LED GSM operating manual
Detection Systems
Detection Systems 7090i Installation and programming manual
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 instructions
Siemens
Siemens FDM273 manual