Honeywell HD3CHS User manual
Document 800-05321 – Rev B – 05/10
User Guide
3 Inch Dome Camera
NTSC / PAL
HD3CHS HD3CHSX
Document 800-05321 Rev B 3
05/10
Warnings
Installation and servicing should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain your
warranty.
WARNING! The Use of CSA Certified/UL Listed Class 2 power
adapters is required to ensure compliance with
electrical safety standards.
WARNING! To reduce the risk of fire or electrical shock, do not
expose the product to rain or moisture.
WEEE (Waste Electrical and Electronic Equipment). Correct disposal of
this product (applicable in the European Union and other European
countries with separate collection systems). This product should be
disposed of, at the end of its useful life, as per applicable local laws,
regulations, and procedures.
Explanation of Graphical Symbols
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
CAUTION
4
FCC Compliance Statement
Information to the User: This equipment has been tested and found to
comply with the limits for a Class A digital device. Pursuant to Part 15 of the
FCC Rules, these limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Caution Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Manufacturer’s Declaration of Conformance
The manufacturer declares that the equipment supplied with this guide is
compliant with the essential protection requirements of the EMC directive
2004/108/EC and the Low Voltage Directive LVD 2006/95/EC, conforming
to the requirements of standards EN 55022 for emissions.
Document 800-05321 Rev B 5
05/10
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Unpack Everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cautions and Operating Notes . . . . . . . . . . . . . . . . . . . . . . . 7
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Disassembling the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting the Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mounting the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Configuring the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Camera Setup Functions . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the Camera Position. . . . . . . . . . . . . . . . . . . . . . . 13
On-Screen Display (OSD) Menu Structure . . . . . . . . . . 15
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the Lens and Brightness Level . . . . . . . . . . . . . 16
Optimizing the Lens Setup . . . . . . . . . . . . . . . . . . . . . . 16
Setting the White Balance . . . . . . . . . . . . . . . . . . . . . . . 18
OSD Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Completing the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Attaching and Securing the Dome Cover . . . . . . . . . . . . . . 25
Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Accessory Mounting Application . . . . . . . . . . . . . . . . . 27
Document 800-05321 Rev B 7
05/10
Introduction
The HD3CHS Series CCTV Camera is ideal for indoor installations in
commercial and residential environments.
Before You Begin
Please read this guide carefully before you install the HD3CHS Series 3
Inch Dome Camera. Keep this guide for future reference.
Unpack Everything
Check that the items received match those listed on the order form and
packing slip. The HD3CHS Series 3 Inch Dome Camera packing box
should include, in addition to this Install Guide:
If any parts are missing or damaged, contact the dealer you purchased the
camera from or call Honeywell Customer Service.
• One fully assembled camera • One hardware kit containing
mounting screws
• One 2nd video monitor output
cable
• One mounting template
• Two Honeywell labels •
8
Cautions and Operating Notes
Power Supply This dome camera can operate on 24 VAC or 12 VDC.
Operating Conditions
Avoid viewing very bright objects (example, light fixtures) for extended
periods.
Avoid operating or storing the unit in the following locations:
• Extremely humid, dusty, hot/cold environments (where the operating
temperature is outside the recommended range of 14°F to 122°F
[-10°C to +50°C])
• Close to sources of powerful radio or TV transmitters
• Close to fluorescent lamps or objects reflecting light
• Under unstable light sources (may cause flickering)
Document 800-05321 Rev B 9
05/10
Installation
The HD3CHS Series is a fully-integrated enclosure with camera and lens.
Figure 1 Camera Parts
Legend
aVideo output connector
b24 VAC/12 VDC power input
connector (red+, black-)
1Side notch used for surface run
power/video connector
2Camera base
3Camera housing lock
4Camera housing
5Bubble
6Zoom lever
7Focus lever
1
2
3
6
5
b
a
Note See Figure 4 for an explanation of the camera board settings.
4
7
10
Disassembling the Camera
1. Gently turn the camera housing (#5 on Figure 2) counter-clockwise to
unlock and pull free of the camera base. Note the two line markers.
2. Remove the inner liner (#4) by gently pulling it free of the two notches
(#3) in the camera housing (#5). Set the housing, bubble (#6) and
liner aside.
Figure 2 Camera Disassembly
1
5
4
Legend
1Camera base (including gimbal)
2Line markers
3Tilt adjustment bracket and
thumbnuts, Notches (x2)
4Inner liner
5Camera housing
6Bubble
3
6
2
Other manuals for HD3CHS
2
This manual suits for next models
1
Table of contents
Other Honeywell Security Camera manuals
Honeywell
Honeywell HCU484X User manual
Honeywell
Honeywell HEIPTZ-2201W-IR User manual
Honeywell
Honeywell EQUIP Series User manual
Honeywell
Honeywell NightHawk HCC80354 User manual
Honeywell
Honeywell HDZP304DI User manual
Honeywell
Honeywell HCC484TP User manual
Honeywell
Honeywell 30 Series User manual
Honeywell
Honeywell 30 Series User manual
Honeywell
Honeywell HD50 User manual
Honeywell
Honeywell ScanDome iii HSDC-251N/P Owner's manual
Honeywell
Honeywell HCU484 User manual
Honeywell
Honeywell HSD-361P User manual
Honeywell
Honeywell 3MP User manual
Honeywell
Honeywell HCS544X User manual
Honeywell
Honeywell 2450Cm Series User manual
Honeywell
Honeywell HD3UX User manual
Honeywell
Honeywell HD4UX User manual
Honeywell
Honeywell Vista VDC-350PIV-V User manual
Honeywell
Honeywell KD6A User manual
Honeywell
Honeywell HDT User manual
