Honeywell HCM574L User manual

Document G-113078-001 – 02/07 – Rev 5

L-Series

B/W Camera

HCM574L HCM584LX

HCM384L HCM585LX

HCM404LX

HCM405LX

User Guide

EIA CCIR

Revisions

Issue Date Revisions

1.00 09/06 New document

1.01 09/06 Updated Mains 230V in Figure 2 and

Figure 7.

1.02 10/06 Changed 2nd ‘clockwise’ to

‘counterclockwise’ on page 8.

3 10/06 Updated Figure 1, Figure 4, and Figure 5

to show HCM model.

4 11/06 Updated Figure 1 for better quality.

5 02/07 Updated document part no.; added

warning to p. iii.

Rev 5 ii G-113078-001

02/07

Rev 5 iii G-113078-001

02/07

Warnings

Installation and servicing should be performed only by

qualified and experienced personnel to conform to all local

codes and to maintain your warranty.

WARNING! 12 VDC/24 VAC models require the use

of CSA Certified/UL Listed Class 2

power adapters to ensure compliance

with electrical safety standards.

Where the MAINS plug or an appliance coupler is used as

the disconnect device, the disconnect device shall remain

readily operable.

WEEE (Waste Electrical and Electronic Equipment).

Correct disposal of this product (applicable in the

European Union and other European countries with

separate collection systems). This product should be

disposed of, at the end of its useful life, as per applicable

local laws, regulations, and procedures.

Explanation of Graphical

Symbols

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER.

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE

CONSTITUTING A RISK OF

ELECTRIC SHOCK IS PRESENT

WITHIN THE UNIT.

THIS SYMBOL INDICATES THAT

IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS

ACCOMPANY THIS UNIT.

CAUTION

Rev 5 iv G-113078-001

02/07

FCC Compliance Statement

Information to the User: This equipment has been tested

and found to comply with the limits for a Class A digital

device. Pursuant to Part 15 of the FCC Rules, these limits

are designed to provide reasonable protection against

harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may

cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Caution Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

Manufacturer’s Declaration of

Conformance

The manufacturer declares that the equipment supplied

with this guide is compliant with the essential protection

requirements of the EMC directive 89/336/EEC and the Low

Voltage Directive LVD 73/23 EEC, conforming to the

requirements of standards EN 55013 for emissions.

Rev 5 G-113078-001

02/07

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . 2

Unpack Everything. . . . . . . . . . . . . . . . . . . . . . . . 2

Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Camera Functions . . . . . . . . . . . . . . . . . . . . . . . . . 3

Setting Up Your Camera . . . . . . . . . . . . . . . . . . . . 4

Selecting the Lens . . . . . . . . . . . . . . . . . . . . . . 4

Fixed Lens . . . . . . . . . . . . . . . . . . . . . . . . . 4

Vari-focal Auto Iris Lens . . . . . . . . . . . . . . . 4

Direct Drive (DC) Lens . . . . . . . . . . . . . . . . 4

Video Drive (VSD) Lens . . . . . . . . . . . . . . . 5

Backlight Compensation (BLC). . . . . . . . . . . . 5

Automatic Gain Control (AGC) . . . . . . . . . . . . 5

Synchronization Selection (LL/INT) . . . . . . . . . 5

Line Lock Phase Adjustment Potentiometer . . 6

Lens Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Adjusting the Back Focus . . . . . . . . . . . . . . . . . . . 7

Completing the Installation . . . . . . . . . . . . . . . . . . . 9

Mounting the Camera . . . . . . . . . . . . . . . . . . . . . . 9

Connecting the Camera . . . . . . . . . . . . . . . . . . . 10

Warranty and Service . . . . . . . . . . . . . . . . . . . . . . 11

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Rev 5 1 G-113078-001

02/07

Introduction

The Honeywell L-Series monochrome cameras are ideally

suited for use in day-to-day surveillance applications. The

L-Series monochrome cameras are designed for

exceptional value and performance for everyday use. Their

off-the-shelf feature set is designed for high picture quality

in standard applications and they require little to no

adjustment after installation.

Figure 1 Camera Overview

Features

• 1/3” Monochrome CCD

• C/CS adjustable lens mount adapter

• Excellent signal-to-noise ratio of more than 50 dB

• Less than 0.1 lux low light sensitivity for excellent

performance in low light conditions

• Compatible with Video Iris (VSD) or Direct Drive (DC)

Auto Iris lens

• 12 VDC/24 VAC or 230 VAC operation (model

dependent)

Lens connector for

Auto Iris lens plug

Setscrew: loosen locking ring

with a Phillips screwdriver to

adjust mounting ring.

C/CS mount adapter:

C mount: turn

counterclockwise

CS mount: turn clockwise

Back focus adjustment ring

Rev 5 2 G-113078-001

02/07

Before You Begin

Unpack Everything

Check that the items received match those listed on the

order form and packing slip. The L-Series packing box

should include, in addition to this User Guide:

• One L-Series monochrome camera

• One Auto Iris lens plug

If any parts are missing or damaged, contact the dealer you

purchased the camera from or call Honeywell Customer

Service (see Contact Information on the back of this

manual).

Note You will also require a Phillips screwdriver to

complete the installation.

Please read this guide carefully

before you install the L-Series

monochrome camera.

Keep this guide for future reference.

Rev 5 3 G-113078-001

02/07

Camera Settings

Camera Functions

Figure 2 Camera Rear View

Legend

#Description

1DIP switches for mode settings (see Figure 3)

2Auto Iris Lens select switch, VSD for Video or DC for Direct

Drive

3Video output connector

4Power input connector (24 VAC: 3 terminals)—Low Voltage

model only

5Power LED indicator

6DC Iris level adjustment, for use with DC Iris lens

7V-Phase adjustment, for use with Line lock

8Mains 230V Line Voltage power connector

VSD

VIDEO

IRIS

LEVEL

PWR

V- P H

AES

OFF

INT

BLC

AGC

VSD

VIDEO

IRIS

LEVEL

PWR

V-PH

AES

OFF

INT

BLC

AGC

CLASS 2 ONLY

=ON

=OFF

LEGEND

765

Mains 230V—Line Voltage

(HCM585LX, HCM405LX)

Low Voltage

(HCM574L, HCM384L,

HCM584LX, HCM404LX)

Shaded box indicates default switch setting.

5376

Rev 5 4 G-113078-001

02/07

Setting Up Your Camera

Figure 3 shows the factory set DIP switch settings.

Automatic Gain Control (AGC) is set ON.

Figure 3 Factory Set DIP Switch Settings

Selecting the Lens

Fixed Lens

Set the AES/AI switch on the rear of the camera (see

Figure 3) to AES.

Vari-focal Auto Iris Lens

Vari-focal Auto Iris lenses (Direct Drive [DC] or Video Drive

[VSD]) are connected to the camera via a 4-pin square

socket located at the side of the camera. Set the AES/AI

DIP switch to AI.

To set a different exposure, see Backlight Compensation

(BLC) on page 5.

Direct Drive (DC) Lens

1. Set the VSD/DC switch on the rear of the camera to

DC. Set the AES/AI DIP switch to AI.

2. Slowly turn the IRIS LEVEL potentiometer until the

picture on the monitor is as clear as possible and is not

too bright.

VSD

VIDEO

IRIS

LEVEL

PWR

V-PH

AES

OFF

INT

BLC

AGC

IRIS

LEVEL

CLASS 2 ONLY

AES

OFF

INT

BLC

AGC

VSD

=ON

=OFF

LEGEND

Low Voltage version shown

Rev 5 5 G-113078-001

02/07

Video Drive (VSD) Lens

Set the VSD/DC switch on the rear of the camera (see

Figure 3) to VSD.

Backlight Compensation (BLC)

If there is excessive light (for example, a window exists in a

scene), the camera tries to compensate by reducing the

overall exposure, resulting in the areas surrounding the

window becoming too dark. Turn the BLC switch ON to

eliminate the silhouette effect.

Automatic Gain Control (AGC)

This feature can improve picture quality when the level of

scene illumination is low. When set to OFF, the maximum

gain is 11 dB. When set to ON, the maximum gain is 30 dB.

Synchronization Selection (LL/INT)

This switch selects the synchronization mode of the

camera. When the camera is connected to an AC supply,

the Line lock (LL) mode is used to lock the camera’s frame

rate to the frequency so that each camera in the system is

triggered at the same point on the supply’s AC cycle. The

default setting is LL.

WARNING! The LL/INT switch must be set to INT

when operating from 12 VDC.

Other manuals for HCM574L

This manual suits for next models

Table of contents

Other Honeywell Security Camera manuals

Honeywell

Honeywell HD3UH User manual

Honeywell

Honeywell EQUIP HD4DIP User manual

Honeywell

Honeywell EQUIP Series Operator's manual

Honeywell

Honeywell HWC-S363-RV User manual

Honeywell

Honeywell 30 Series User manual

Honeywell

Honeywell EQUIP HCD554IP User manual

Honeywell

Honeywell HCD95534 User manual

Honeywell

Honeywell Lyric C1 User manual

Honeywell

Honeywell HD3C User manual

Honeywell

Honeywell HD3VC4SHR User manual

Honeywell

Honeywell HCD484E User manual

Honeywell

Honeywell equIP H2S1P6X User manual

Honeywell

Honeywell Vista VDC-350PIV-V User manual

Honeywell

Honeywell 30 Series User manual

Honeywell

Honeywell H4W2PER2 User manual

Honeywell

Honeywell HCC484LX User manual

Honeywell

Honeywell HD4USX User manual

Honeywell

Honeywell HD4US User manual

Honeywell

Honeywell HB70 User manual

Honeywell

Honeywell HBD92SX User manual

Honeywell

Honeywell HD2FC1 User manual

Honeywell

Honeywell HBD95SX User manual

Honeywell

Honeywell HD4UX User manual

Honeywell

Honeywell HEW2PR1 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications