Honeywell PW-6000 Operator's manual

PW-6000

Intelligent Controller

Installation and Configuration Guide

Part Number: PW6K1IC

Get other manuals https://www.bkmanuals.com

All product and brand names are the service marks, trademarks, registered trademarks,

or registered service marks of their respective owners. Printed in the United States of

America. Honeywell reserves the right to change any information in this document at

any time without prior notice.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

Windows Server is a trademark of Microsoft Corporation.

Ordering Information

Please contact your local Honeywell representative or visit us on the web at

www.honeywellaccess.com for information about ordering.

Feedback

Honeywell appreciates your comments about this manual. Please visit us on the web at

www.honeywellintegrated.com to post your comments.

Get other manuals https://www.bkmanuals.com

PW-6000 Installation and Configuration Guide, Document 800-00005, Revision A iii

CONTENTS

Notices................................................................................................................... 1

Warnings and Cautions .................................................................................. 1

Damage During Shipment .............................................................................. 2

Electro Static Discharge ................................................................................. 2

Disclaimer – Product Liability; Mutual Indemnification .............................. 3

Unpacking Procedure .................................................................................... 3

Shipping Instructions ..................................................................................... 3

Limited Warranty .......................................................................................... 4

Confidentiality ............................................................................................... 4

Product Overview.................................................................................................. 5

PW-6000 and PW-5000.................................................................................. 5

Port Settings.................................................................................................... 5

Other ............................................................................................................... 6

Setting Up the PW-6000 Hardware....................................................................... 8

Setting the Jumpers......................................................................................... 8

Setting the DIP Switches ................................................................................ 9

Technical Specifications............................................................................... 11

Status LEDs ................................................................................................. 12

Supplying Power to the PW-6000 Interface ................................................. 13

Communications Wiring............................................................................... 14

Cabinet Tamper and Power Failure Input Wiring ........................................ 14

Memory and Real Time Clock Backup Battery ........................................... 14

System Configuration via Web Interface............................................................ 15

Connecting to ACDSM for the First Time ................................................... 15

Home Page.................................................................................................... 16

Network Settings .......................................................................................... 17

Host Port ....................................................................................................... 18

Device Information....................................................................................... 22

User Configuration ....................................................................................... 23

Restore Default Screen ................................................................................. 24

Apply Setting Screen .................................................................................... 25

Log Out......................................................................................................... 25

Appendix A ......................................................................................................... 27

Get other manuals https://www.bkmanuals.com

PW-6000 Installation and Configuration Guide, Document 800-00005, Revision A v

LIST OF FIGURES

Figure 1: PW-6000 Connections, LEDs, and DIP Switches .............................. 7

Figure 2: PW-6000 Power Terminals ............................................................... 13

Figure 3: PW-6000 Port Wiring ....................................................................... 14

Figure 4: PW-6000 TMP and FLT Terminals .................................................. 14

Figure 5: PW-6000 Web Server Login Screen ................................................. 15

Figure 6: PW-6000 Web Server Home Page .................................................... 16

Figure 7: PW-6000 Web Server Network Settings Screen .............................. 17

Figure 8: PW-6000 Host Port Configuration Screen with IP Server

Connection ...................................................................................................... 18

Figure 9: PW-6000 Host Port Configuration Screen with IP Client

Connection ..................................................................................................... 20

Figure 10: PW-6000 Host Port Configuration with Serial RS-232 Connection 21

Figure 11: PW-6000 Web Server Device HW Info Screen ................................ 22

Figure 12: PW-6000 Web Server User Info Screen ........................................... 23

Figure 13: PW-6000 Web Server Restore Default Screen ................................. 24

Figure 14: PW-6000 Web Server Apply Setting Screen .................................... 25

Get other manuals https://www.bkmanuals.com

PW-6000 Installation and Configuration Guide, Document 800-00005, Revision A vii

LIST OF TABLES

Table 1 PW-6000 Jumper Settings .................................................................. 8

Table 2 PW-6000 DIP Switch Settings ............................................................ 9

Table 3 PW-6000 Technical Specifications ................................................... 11

Table 4 PW-6000 Status LED Combinations During Initialization .............. 12

Table 5 PW-6000 Status LED Combinations During Run Time ................... 13

Get other manuals https://www.bkmanuals.com

viii www.honeywell.com

Get other manuals https://www.bkmanuals.com

PW-6000 Installation Guide, Document 800-00005, Revision A 1

PW-6000 Installation

1 Notices

1.1 Warnings and Cautions

Before Installation

Warning: Before installation, TURN OFF the external circuit breaker which supplies

power to the system.

Before connecting the device to the power supply, verify that the output voltage is

within specifications of the power supply (see 'Technical Specifications' on page 11).

Do not apply power to the system until after the installation has been completed.

Personal injury or death can occur, and the equipment can be damaged beyond repair,

if this precaution is not observed.

Fire Safety and Liability Notice

Warning: Never connect card readers to any critical entry, exit door, barrier, elevator or

gate without providing an alternative exit in accordance with all the fire and

life safety codes pertinent to the installation.

These fire and safety codes vary from city to city and you must get approval from

local fire officials whenever using an electronic product to control a door or other

barrier. Use of egress buttons, for example, may be illegal in some cities. In most

applications, single action exit without prior knowledge of what to do is a life safety

requirement. Always make certain that any required approvals are obtained in writing.

DO NOT ACCEPT VERBAL APPROVALS SINCE THEY ARE NOT VALID.

Honeywell Integrated Security never recommends using the PW-6000 or related

products for use as a primary warning or monitoring system. Primary warning or

monitoring systems should always meet the local fire and safety code requirements.

The installer must also test the system on a regular basis by instructing the end user in

appropriate daily testing procedures. Failure to test a system regularly could make the

installer liable for damages to the end user if a problem occurs.

Get other manuals https://www.bkmanuals.com

2www.honeywell.com

PW-6000 Installation

Notices

Earth Grounding

Warning: EARTH ground all enclosures for proper installation.

Use Suppressors

Warning: Use suppressors on all door strikes. Use S-4 suppressors for installation.

Honeywell Integrated Security, Inc. recommends only DC strikes.

1.2 Damage During Shipment

Caution: IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A CLAIM MUST

BE FILED WITH THE COMMERCIAL CARRIER RESPONSIBLE FOR THE

DAMAGE.

1.3 Electro Static Discharge

Caution: Electro-static discharge (ESD) can damage CMOS integrated circuits and

modules.

To prevent damage always follow these procedures:

• Use static shield packaging and containers to transport all electronic

components, including completed reader assemblies.

• Handle all ESD sensitive components at an approved static-controlled

workstation. These workstations consist of a desk mat, floor mat and an ESD

wrist strap. Workstations are available from various vendors.

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment.This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

installation and user guides, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

Note: This document and the data in it shall not be duplicated, used or disclosed to

others for procurement or manufacturing, except as authorized by and with the written

permission of Honeywell Integrated Security, Inc.The information contained in this

document or in the product itself is the exclusive property and trade secrets of

Honeywell Integrated Security, Inc. Copyright laws of the United States protect all

information in this document or in the software product itself.

Note: Any use of this product is subject to the terms and acceptance of the Honeywell

Integrated Security, Inc. Software Agreement. Please request a copy from Honeywell

Integrated Security, Inc. (http://www.honeywellintegrated.com/index.html), and

review the agreement carefully.

Get other manuals https://www.bkmanuals.com

PW-6000 Installation

Notices

PW-6000 Installation Guide, Document 800-00005, Revision A 3

1.4 Disclaimer – Product Liability; Mutual Indemnification

If a Customer receives a claim that a Product or any component thereof has caused

personal injury or damage to the property of others, Customer shall immediately

notify Honeywell Integrated Security in writing of all such claims. Honeywell

Integrated Security shall defend or settle such claims and shall indemnify and hold

Customer harmless for any costs or damages including reasonable attorneys’ fees

which Customer may be required to pay as a result of the defective Product or the

negligence of Honeywell Integrated Security, its agents, or its employees.

Customer shall hold harmless and indemnify Honeywell Integrated Security from and

against all claims, demands, losses and liability arising out of damage to property or

injury to persons occasioned by or in connection with the acts or omissions of

Customer and its agents and employees, and from and against all claims, demands,

losses and liability for costs of fees, including reasonable attorneys’ fees, in

connection therewith.

1.5 Unpacking Procedure

Caution: If any damage to the shipment is noticed before unpacking, a claim must be

filed with the commercial carrier.

All containers should be opened and unpacked carefully in order to prevent damage to

the contents.

Follow these steps to unpack equipment in preparation for installation:

1. Open the container and remove the unit(s) and all packing material. Retain the

container and all the packing materials. They may be used again for

reshipment of the equipment, if needed.

2. Inspect the contents to see if anything is missing. If you notice any missing

items, contact the order entry department at 1-800-323-4576 Option-1.

3. Visually check the contents. If you see any damage, do the following:

a. If shipping has caused damage to the unit, a claim must be filed with the

commercial carrier.

b. If any other defect is apparent, call for a return authorization.

1.6 Shipping Instructions

To ship equipment back to Honeywell Integrated Security, contact the customer

service department at 1-800-323-4576 before returning the equipment. When you call,

please have available:

• A description of the problem or the reason you are returning the equipment.

• Your original purchase order number, invoice number and if the unit is still

under warranty.

• A new purchase order number if the unit is not under warranty

From the customer service department, obtain the Return Authorization Number

(RMA).

Get other manuals https://www.bkmanuals.com

Other manuals for PW-6000

This manual suits for next models

Table of contents

Other Honeywell Controllers manuals

Honeywell

Honeywell S05 Series User manual

Honeywell

Honeywell Spyder PUL1012S User manual

Honeywell

Honeywell Ex-Or MLS Installation and operation manual

Honeywell

Honeywell MO953 Series Mounting instructions

Honeywell

Honeywell touchpoint Pro User manual

Honeywell

Honeywell 6200 Series Instruction manual

Honeywell

Honeywell UDC2500 User manual

Honeywell

Honeywell UDC3300 User manual

Honeywell

Honeywell Alerton ACM User manual

Honeywell

Honeywell CVL4022ASVAV1 User manual

Honeywell

Honeywell INCOMM L510 User manual

Honeywell

Honeywell SEC-H-600 User manual

Honeywell

Honeywell R7184A User manual

Honeywell

Honeywell UMC800 User manual

Honeywell

Honeywell ML7999C Operation manual

Honeywell

Honeywell S05 Series User manual

Honeywell

Honeywell VR8300 User manual

Honeywell

Honeywell Excel 15 W7760A User manual

Honeywell

Honeywell ACS-2plus User manual

Honeywell

Honeywell HVC0002 User manual

Honeywell

Honeywell AQUASTATIC L7224 Series User manual

Honeywell

Honeywell Temaline TS2 User manual

Honeywell

Honeywell Excel 10 W7752D User manual

Honeywell

Honeywell CENTRALINE EAGLE User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual