Honeywell D6 PRO User manual

® U.S. Registered Trademark

US Pat 8,950,687 and other patents pending

3300322EFS01 M.S. 0218

Printed in U.S.A.

Need Help?

Go to

customer.honeywell.com

Call

1- 80 0 - 6 3 3-3 991

In this box

Wall plug

USB cable

Back plate

Tabletop stand

Wall mount

hook and loop

strips (2)

Controller

AUTO

Quick reference

Auto

Changeover

WiFi status

Up button

Mode/

Select

button

Mode

icons

Status

display

Down

button

D6 PRO Wi-Fi

DUCTLESS

CONTROLLER

Installation Guide

Home and Building Technologies

715 Peachtree Street NE

Atlanta, GA 30308

customer.honeywell.com

33-00322EFS-01

Choose a location

Choose a location where the controller’s signal has a clear path to

the ductless unit.

Remove the batteries from the remote controller that came with the

ductless unit. That way the two controllers won’t send conflicting

commands.

The controller sends an IR signal from three places. One on each side,

left and right, and one from the top.

Consider them when you choose a location.

0°

0 m

)

0 ft

0°

0 ft

(

10 m

)

30 ft

(

10 m

)

Tabletop assembly

Wall mount assembly

Pull the power cord through

the tabletop stand.

Plug the power cord into the

controller.

Connect the tabletop stand to

the controller.

Attach the wall mount hook and

loop strips to the controller,

slightly overlapping the back plate

on both sides.

Place the controller in your

selected location.

Attach the controller to the

wall in your selected location.

Plug the power cord into the

controller.

Snap the back plate onto the

controller.

Plug the power cord into the wall

adapter, and plug in the wall adapter.

Plug the power cord into the wall

adapter, and plug in the wall adapter.

System setup

Connect the controller to power. Press any button to enter setup.

Press oto access options for

setting -1 (Controller Location).

Setting -2 is displayed. Press o

to access options for setting -2.

Setting -3 is displayed. Press o

to access options for setting -3.

Setting -5 is displayed. Press o

to access options for setting -5.

Setting -6 is displayed. Press o

to access options for setting -6.

Setting -4 is displayed only if

setting -3 is set to 02 - Multi. Press

oto access options for setting -4.

Press oto select the option for setting -1.

Press oto select the option for setting -2.

Press oto select the option for setting -3.

Press oto select the option for setting -5.

Press oto select the option for setting -6.

Press oto select the option for setting -4.

Press +to change setting -1 to

the desired option.

Press +to change setting -2 to

the desired option.

Press +to change setting -3 to

the desired option.

Press +to change setting -5 to

the desired option.

Press +to change setting -6 to

the desired option.

Press +to change setting -4 to

the desired option.

The screen will display . Press oto save and exit system setup.

Setting Options (Default in bold)

-1 Controller Location 01 – Tabletop

02 – Wall mount

-4 Multi Outdoor Unit

Number 02 - 99

Setup Complete

-2 Temperature Scale 01 – °F

02 – °C

-3 Outdoor Unit

Configuration 01 – Single

02 – Multi

-5 Ductless Unit Brand See page 19 for Ductless Unit

Brand ID

-6 Ductless Unit Model See page19 for Ductless Unit

Model ID

Change mode

Display sleep

Change temperature

Warmer Cooler

Symbol Mode

Heat mode - the ductless unit warms the space to the

temperature shown on the controller.

Cool mode - the ductless unit cools the space to the

temperature shown on the controller.

[screen is

blank] Off mode - the ductless unit is turned off

Room temperature

Any time the controller is not being interacted with, the current room

temperature is displayed on screen.

Viewing set temperature

Be sure the controller is not in Display sleep, then press +or -once to

view the current set temperature. The set temperature will “pulse” on

screen. After a short period of time the screen will change to display the

room temperature.

Change temperature

1. Be sure the controller is not in Display sleep, then press +or -more

than once to change the set temperature so it is higher or lower in the

current mode.

2. Stop pressing +or -when you reach the temperature you want.

3. The screen will pulse and then return to the room temperature

display.

1. Be sure the controller is not in Display sleep, then press oto change

the system mode.

2. Stop pressing owhen you reach the mode you want.

The ductless unit will beep when it gets a command from the controller.

The controller goes into Display sleep (the screen is dim) after 45

seconds of inactivity. Press oto wake up the controller. This button push

does not change temperature or settings.

WiFi setup

1. Download the Honeywell Home app.

2. Create an account or log in to your

account.

3. Select “Add New Device” from the menu in

the app.

4. Choose D6 Pro WiFi Ductless Controller.

5. Follow instructions in the app to configure the controller.

Note: During setup, the WiFi icon will blink or be on solid. This tells

you the controller status in the WiFi connection process.

Blinking blue Controller is powered up and ready to begin connecting.

Solid blue Controller is connected to the mobile device through the app.

Solid green Controller is connected to the WiFi network.

Solid red Controller is disconnected from the WiFi network.

Blinking red Controller is disconnected from WiFi network and has lost it’s

schedule. Reconnect to WiFi network to resume schedule.

In the Honeywell Home app

In the app you can set the controller to Auto Changeover. The

controller will switch from heating mode to cooling mode based on the

temperature setting and the room temperature.

When in Auto Changeover mode,

AUTO

will be displayed on the controller

screen.

GET IT ON

Enter system setup

You can change your controller settings at any time. To enter system

setup:

1. Be sure the controller is not in Display sleep, then press and hold

+and oand -for three seconds all at the same time.

2. Change the settings as needed. See “System setup” for more

information.

Software and security questions

Q: How can I be sure my thermostat is running the most up-to-date

firmware?

A: When your thermostat is connected to WiFi, it will automatically

receive over-the-air firmware updates from Honeywell. These firmware

updates contain things such as new features as well as security

upgrades. Keep your thermostat connected to WiFi to ensure it

receives these updates.

Q: How can I prevent a cybercriminal from making unauthorized changes

to my thermostat?

A: If a cybercriminal gains access to your WiFi router, they can tamper

with a wide range of online activities, including the settings on your

connected devices. Make sure you change the default password on

your WiFi router, and when you select a new password, make sure it

uses multiple upper- and lower-case letters and special characters.

The product should not be disposed of with other household waste. Check for the nearest authorized

collection centers or authorized recyclers. The correct disposal of end-of-life equipment will help prevent

potential negative consequences for the environment and human health.

® Marque déposée aux É.U.

Brevet 8,950,687 aux ÉtatsUnis; autres brevets en instance.

3300322EFS01 M.S. 0218

Imprimé aux ÉtatsUnis

Besoin d’aide?

Aller à

customer.honeywell.com

Appeler

1- 80 0 - 6 3 3-3 991

Contenu de l’emballage

Prise murale

Câble USB

Plaque d’appui

Support de table

Bandes de ruban

autoagrippant

pour montage

mural (2)

Contrôleur

AUTO

Référence rapide

Changement

automatique

État du

signal WiFi

Touche

d’augment-

ation

Touche

Mode/

sélection

Icônes de

mode

Affichage

de l’état

Touche

réduction

CONTRÔLEUR

WI-FI D6 PRO POUR

SYSTÈME SANS GAINE

Guide d’installation

Home and Building Technologies

715 Peachtree Street NE

Atlanta, GA 30308

customer.honeywell.com

1 Choisir un emplacement

Choisissez un endroit à partir duquel le signal du contrôleur vers

l’unité murale n’est pas obstrué.

Retirez les piles de la télécommande qui accompagne l’unité

murale. De cette manière, les commandes des deux contrôleurs

n’entreront pas en conflit.

Le contrôleur transmet un signal IR depuis trois endroits. Un de chaque

côté (gauche et droit) et un du dessus.

Veuillez en tenir compte lors du choix de l’emplacement.

0°

0 m

)

0 ft

0°

0 ft

(

10 m

)

30 ft

(

10 m

)

Installation sur table

Installation murale

Tirez le cordon d’alimentation

à travers le support de table.

Branchez le cordon

d’alimentation dans le contrôleur.

Branchez le support de table

au contrôleur.

Fixez les bandes de ruban

autoagrippant au contrôleur en

chevauchant légèrement la plaque

d’appui de chaque côté.

Placez le contrôleur à l’endroit

désiré.

Placez le contrôleur à l’endroit

désiré sur le mur.

Branchez le cordon d’alimentation

dans le contrôleur.

Enclenchez la plaque d’appui

sur le contrôleur.

Branchez le cordon d’alimentation

dans l’adaptateur mural, puis

branchez l’adaptateur dans une prise

murale.

Plug the power cord into the wall

adapter, and plug in the wall adapter.

Configuration du système

Branchez le contrôleur à

l’alimentation électrique.

Appuyez sur toute touche pour

passer en mode de configuration

Appuyez sur opour accéder aux

options du paramètre -1

(emplacement du contrôleur).

Le paramètre -2 s’affiche. Appuyez

sur opour accéder aux options du

paramètre -2.

Le paramètre -3 s’affiche. Appuyez

sur opour accéder aux options du

paramètre -3.

Le paramètre -5 s’affiche. Appuyez

sur opour accéder aux options du

paramètre -5.

Le paramètre -6 s’affiche. Appuyez

sur opour accéder aux options du

paramètre -6.

Le paramètre -4 s’affiche unique-

ment si le paramètre -3 est réglé à

02 - Multizones. Appuyez sur opour

accéder aux options du paramètre -4.

Appuyez sur opour régler -1 à la valeur voulue.

Appuyez sur opour régler -2 à la valeur voulue.

Appuyez sur opour régler -3 à la valeur voulue.

Appuyez sur opour régler -5 à la valeur voulue.

Appuyez sur opour régler -6 à la valeur voulue.

Appuyez sur opour régler -4 à la valeur voulue.

Appuyez sur +pour régler -1 à

la valeur voulue.

Appuyez sur +pour régler -2 à

la valeur voulue.

Appuyez sur +pour régler -3 à

la valeur voulue.

Appuyez sur +pour régler -5 à

la valeur voulue.

Appuyez sur +pour régler -6 à

la valeur voulue.

Appuyez sur +pour régler -4 à

la valeur voulue.

L’écran affiche . Appuyez sur opour enregistrer vos choix et quitter le

mode de configuration.

Réglage Options (Option par défaut en gras)

-1 Emplacement du

contrôleur 01 – Dessus de table

02 – Montage mural

-4 Numéro du bloc extérieur

de l’unité multizones 02 - 99

Configuration terminée

-2 Échelle de température 01 – °F

02 – °C

-3 Configuration de l’unité

extérieure 01 – Une zone

02 – Multizones

-5 Marque de l’unité

murale Voir la page 19 pour connaître

l’identifiant de marque de l’unité murale

-6 Modèle de l’unité

murale Voir la page 19 pour connaître

l’identifiant de marque de l’unité murale

Other manuals for D6 PRO

Table of contents

Languages:

Other Honeywell Controllers manuals

Honeywell

Honeywell homexpert Rondostat COMFORT+ HR30 User manual

Honeywell

Honeywell SLATE User manual

Honeywell

Honeywell MN6110 User manual

Honeywell

Honeywell V4055F Operation manual

Honeywell

Honeywell S05 Series User manual

Honeywell

Honeywell THP9045A User manual

Honeywell

Honeywell Spyder 5 User manual

Honeywell

Honeywell Excel 10 W7752D User manual

Honeywell

Honeywell HercuLine 2000 Series User manual

Honeywell

Honeywell D6 PRO User manual

Honeywell

Honeywell M7061 User manual

Honeywell

Honeywell MO953 Series Mounting instructions

Honeywell

Honeywell T775U Series User manual

Honeywell

Honeywell UDC1200 MICRO-PRO User guide

Honeywell

Honeywell MS4120S Operation manual

Honeywell

Honeywell T775A User manual

Honeywell

Honeywell R7284B User manual

Honeywell

Honeywell SSW2-1M User manual

Honeywell

Honeywell ComfortPoint Open CPO-PC400-W User manual

Honeywell

Honeywell VR8104 User manual

Honeywell

Honeywell LT-32 User manual

Honeywell

Honeywell EDC 200 Series User manual

Honeywell

Honeywell L482A User manual

Honeywell

Honeywell DBC2000E10 Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual