Honeywell CN100 Technical manual

CN100 Controller Hardware

Planning and Installation Guide

EPDOC-X630-en-516A

August 2020

EXPERION PKS

RELEASE 516

DISCLAIMER

This document contains Honeywell proprietary information.

Information contained herein is to be used solely for the purpose

submitted, and no part of this document or its contents shall be

reproduced, published, or disclosed to a third party without the

express permission of Honeywell International Sàrl.

While this information is presented in good faith and believed to be

accurate, Honeywell disclaims the implied warranties of

merchantability and fitness for a purpose and makes no express

warranties except as may be stated in its written agreement with and

for its customer.

In no event is Honeywell liable to anyone for any direct, special, or

consequential damages. The information and specifications in this

document are subject to change without notice.

CONTENTS

Contents 3

Chapter 1 - About this guide 5

Chapter 2 - Overview 7

Chapter 3 - Hardware Components 9

Redundant Controller 12

Chapter 4 - CN100 Platform Installation 17

Environmental Specifications 18

Power Considerations 18

Power Requirements 18

Power Consumption 19

Installation Declarations 19

Dimensions and Layouts 20

Dimensions of Redundant CN100 Controller 21

Installation Dimensions for a Redundant Controller 23

Mounting 24

Mounting a Controller on dinrail 24

Mounting a Controller on CCA 24

Wiring and Cabling Planning 26

Power Cabling 27

Grounding and Other Considerations 28

Communication Cabling 30

Connecting with Wireless I/O 33

Chapter 5 - Maintenance 35

CN100 module, NAM, IOTA 36

Safety considerations - PLAN AHEAD! 36

Contents

Removal and Insertion Under Power (RIUP) 37

Replacing a CN100 Controller 37

Replacing a NAM 38

Replacing an IOTA 39

Spare parts and model numbers 41

Chapter 6 - Diagnostics and Troubleshooting 43

LED Indicators of a Redundant Controller 44

Additional Information 48

Chapter 7 - Special Condition of Use and Approved Standards 51

Approval Rating of CN100 51

Special Condition of Use for Division 2/Zone 2 Hazardous Location

Installation 52

For the United States 52

For Canada 52

For ATEX and IECEx 53

Approved Standards for Division 2/Zone 2 Hazardous Location 53

US Approval Standards 53

Canadian Standards 54

European Standards (Zone 2) 54

CE LVD and EMC Compliance Standards 55

IEC Standards (Zone 2) 56

Notices 57

Contents

CHAPTER

1ABOUT THIS GUIDE

This publication provides the information on hardware planning,

installation, operation and maintenance for Honeywell CN100

Controller.

For software and firmware considerations, see Experion Control

Builder User’s Guide.

Revision history

Revision Date Description

AAugust 2020 Initial release of document

Introduction to Experion Technology

Item Description

CN100

Module

CN100 controllers running the eCLR (IEC 61131-3) execution

environment with CN100 software options configured with Control

Builder.

Network

Adapter

Module (NAM)

Network Adaptor Modules (CC-INAM01) provides for Uplink

Ethernet connections and supports copper or Fiber connectivity.

Special terms

The following table describes some commonly used industry-wide

and Honeywell-specific terminology:

Terminology Description

NAM Network Adapter Module

How to use this guide

The following table outlines the tasks involved in planning and

installing a CN100 Controller. The links provided will navigate you

through those tasks.

Task Go to

Check the model number of the

hardware components

See "Hardware Components" on page9 for

more information.

Plan the architecture of your system "System Architecture Planning" on page1

Understand and plan the hardware

components of your system

See "Hardware Components" on page9 for

more information.

Plan the wiring of your system See "Wiring and Cabling Planning" on

page26 for more information.

Troubleshoot your system "Diagnostics and Troubleshooting" on

page1

Remove or replace system components See "Maintenance" on page35 for more

information.

Software installation See Software Installation User’s Guide for

detailed information.

Software configuration See Control Builder User’s Guide for

detailed information.

Related documents

The following list identifies publications that may contain information

relevant to the information in this document:

nExperion Software Installation User’s Guide

Chapter 1 - About this guide

CHAPTER

2OVERVIEW

Make sure all the hardware modules used in the system are installed

with the right firmware version and the engineering station has the

latest Experion Control Builder. You can find the firmware and

software updates on http://www.honeywellprocess.com with valid

credentials.

If the equipment is not used in a manner not specified by the

manufacturer, the protection provided by the equipment may be

impaired.

CN100 controller is a modular, powerful, and scalable system capable

of all remote automation and control applications. When combined

with Experion®PKS and its simplified SCADA configuration, it solves

the remote automation requirements.

Starting with R515, a new redundant controller CN100 is added in

Experion PKS.

Chapter 2 - Overview

CHAPTER

3HARDWARE COMPONENTS

CN100 Platform comes with a redundant controller option. The

controller can be expanded with the same CN100 Platform I/O

Modules or connect with Series C IOM by IOLINK. Depending on

software support, other form factor I/O modules along with Wireless

I/O are supported. See the images and table below for the CN100

Platform Hardware.

Figure 3-1: Redundant CN100 Controller (CCA) Front View

Figure 3-2: Redundant CN100 Controller (DINRAIL) Front View

Table 3-1: CN100 Hardware Components

Item Model Number Description

1 CC-IION01 I/O NETWORKING & CONTROL MODULE

2CC-TION11 I/O NETWORKING & CONTROL IOTA

3CC-TION13 I/O NETWORKING & CONTROL IOTA - DIN RAIL

4 CC-INAM01 NETWORK ADAPTER MODULE

Chapter 3 - Hardware Components

Table of contents

Other Honeywell Controllers manuals

Honeywell

Honeywell AutoRAE 2 User manual

Honeywell

Honeywell SUPER TRADELINE S8610U User manual

Honeywell

Honeywell R7426A User manual

Honeywell

Honeywell H808C User manual

Honeywell

Honeywell ML200 Series User manual

Honeywell

Honeywell VS820 POWERPILE User guide

Honeywell

Honeywell RA890G User manual

Honeywell

Honeywell DKG 972 User manual

Honeywell

Honeywell ML7425A Series Operation manual

Honeywell

Honeywell SMARTBOX User manual

Honeywell

Honeywell HC900 Use and care manual

Honeywell

Honeywell HON 372 Manual

Honeywell

Honeywell ML7999A Operation manual

Honeywell

Honeywell S9360A User manual

Honeywell

Honeywell 301C User manual

Honeywell

Honeywell Spyder PUB6438S User manual

Honeywell

Honeywell dcp100t User manual

Honeywell

Honeywell 7800 SERIES RM7895A User manual

Honeywell

Honeywell AQ251 Installation guide

Honeywell

Honeywell HVC0001 User manual

Honeywell

Honeywell Spyder BACnet PUB1012S User manual

Honeywell

Honeywell DC33XB User manual

Honeywell

Honeywell HA20 User manual

Honeywell

Honeywell SP907B User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual