Honeywell VOYAGER 1202G BF User manual

Voyager™ 1202g BF
Cordless Single-Line Laser Bar Code Scanner and 
CCB00-010BT-01N-BF base
Quick Start Guide
VG1202BF-QS Rev B 
2/15
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Para Português, acesse www.honeywellaidc.com.br.
Перейти на русскоязычный сайт www.honeywellaidc.com.
Pro češtinu jdi na www.honeywellaidc.com.
Pre slovenčinu choďna www.honeywellaidc.com.
日本語 :  www.honeywellaidc.com をご覧ください。
如要到中国 www.honeywellaidc.com（简体）。
한글 www.honeywellaidc.com 로이동합니다 .

Note: Refer to your user’s guide for information about cleaning your

device.

Getting Started

Turn off the computer’s power before connecting the base, then

power up the computer once the base is fully connected. When the

base is connected and powered up, put the scanner in the base to

establish a link. The green LED on the base flashes to indicate the

scanner’s instant charge pack is charging. The scanner must be

returned to the base when not in use. A scanner charged on the base

with the power supply for 35 seconds will result in 100 scans, with

one scan every second.

Power Supply Assembly (if included)

USB Connection

Note: Charging the scanner through a USB port takes more time

than direct AC adapter charging.

RS232 Serial Port Connection

RS485 Connection

Keyboard Wedge Connection

Note: For Keyboard Wedge, you must use the power supply.

Base LED Sequences and Meaning

Red LED - Host Communication

Red LED Condition

Off Power off, USB suspend

On continuously Power on, system idle

Short blinks. Occurs while

transferring data to the host port.

Receiving data

Green LED - Scanner Battery

Green LED Condition

Off Instant charge pack not detected or

charge suspended

Slow flash, 1 second on, 1 second

off

Charging, Instant charge pack near

empty

Slow flash, 0.5 second on, 0.5

second off

Charging, Instant charge pack at

medium capacity

Slow flash, 0.25 second on, 0.25

second off

Charging, Instant charge pack near

full capacity

On continuously Charge complete

Scanner

Charge Base

Base LEDs

Reading Techniques

Standard Product Defaults

The following bar code resets all standard product default settings.

RS485 Interface

The RS485 interface defaults to port 5B. If you have an IBM POS

terminal using port 9B, scan the appropriate code below to program

the terminal, then power cycle the cash register.

Note: For additional RS485 interface selections, see the User’s

Guide for your product at our website,

www.honeywellaidc.com.

Standard Product Defaults

IBM Port 9B HHBCR-1

Interface

IBM Port 9B HHBCR-2

Interface

Keyboard Country

If your interface is USB Keyboard or Keyboard Wedge, your

keyboard layout default is a US keyboard. To change this layout,

refer to the chart below for your keyboard country. Scan the

Program Keyboard Country bar code below, then scan the numeric

bar code(s) for the appropriate Country Code from page 2, then scan

the Save bar code.

By default, national character replacements are used for the

following characters: #$@[\]^‘{|}~ Refer to the ISO 646 Character

Replacements chart in your User’s Guide to view the character

replacements for each country.

Country

Code Scan

Country

Code Scan

Country

Code Scan

Arabia 91 IBM Financial 90 Sweden/

Finland 2

Belgium 1Italy 5Switzerland 6

China 92 Japan 28 Thai 94

France 3Korea 93 Turkey (Q) 24

Germany/

Austria 4Portugal 13 USA (Default) 0

Great Britain 7Russia 26 Vietnam 95

Hungary 19 Spain 10

Program Keyboard Country

Save

Locked Link

If you link a scanner to a base using the Locked Link Mode, other

scanners are blocked from being linked if they are inadvertently

placed into the base. If you do place a different scanner into the

base, it will charge the scanner, but the scanner will not be linked.

To use a different scanner, you need to unlink the original scanner by

scanning the Unlink Scanner bar code, below.

Override Locked Scanner

If you need to replace a broken or lost scanner that is linked to a

base, scan the Override Locked Scanner bar code with a new

scanner, and place that scanner in the base. The locked link will be

overridden; the broken or lost scanner’s link with the base will be

removed, and the new scanner will be linked.

Unlinking the Scanner

If the base has a scanner linked to it, that scanner must be unlinked

before a new scanner can be linked. Once the previous scanner is

unlinked, it will no longer communicate with the base. Scan the

Unlink Scanner bar code to unlink a scanner.

Locked Link Mode

(Single Scanner)

Override Locked Scanner

Unlink Scanner

Other manuals for VOYAGER 1202G BF

Table of contents

Honeywell VOYAGER 1202G BF User manual

Popular Barcode Reader manuals by other brands