Model CA 1030 Sentinel Monitor which requires 6 Pin Din
VIDEO SURVEILLANCE SYSTEM
Weatherproof High Power Infrared Illuminated
B/W Camera
Introduction:
The ‘Home Sentinel” Weatherproof Infrared Illuminated
camera has been specifically designed to meet the
high quality standards of the Home Sentinel family
of products. The CA 1030 is ideal for use in
locations requiring little or no illumination at night.
Camera can be used with any TV set or Home
Sentinel Video security monitor ( 6 pin Din )
Plug n’ play connection to any Home Sentinel
video security monitor using the adapter cable
High power infrared illumination provides images of up to 20
meters away at night
Auto-focus and auto-iris lens compensate for changing light
and varying distances
Ambient light sensor increases infrared illumination as needed
Wide angle lens is ideal for indoor or outdoor
video surveillance applications
Safety Instructions:
1. To reduce the risk of fire or electric shock, do
not expose this system to excessive rain or
moisture
2. Do not use the CA 1030 near any flammable
liquids such as oil, propane or natural gas
3. Keep the CA 1030 away from any heat sources
such as a radiator, heating fan, or a stove
4. The AC adapter may become hot after
prolonged use. Make sure that there is at least
12 inches between the AC adapter and any
flammable materials, such as curtains or papers
5. Do not attempt to repair any part of the system.
If it requires repair, please phone 1-800-268-9852
( toll free ) or for international calls, (905) 475-8444.
Contents of Package
Before using the unit, unpack the CA 1030 system,
and inspect the contents. The following components
should be present:
(1) Weatherproof Black & White Infrared Camera
(1) 65 ft cable and camera mounting stand
(1) Power Supply
(1) DIN-RCA cable adapter
Identifying the Parts
1. B/W CCD Camera with infrared Illuminators
Delivers a clear detailed picture to the TV set
Or monitor
2. RCA cable
65 ft cable to connect to the camera
3. AC Adapter
Connect the AC adapter to the RED power
cable on the camera and plug into wall outlet
4. Adapter Cable
Use this DIN-RCA cable when using a Home Sentinel
Monitor
5. Camera Mounting Bracket
Comes with 3 screws for mounting, and a swivel bracket
for the camera
Installation
Connection to a TV
1. Connect the Yellow RCA cable from the Infrared
camera to the Video input on your TV set. ( 65 ft cable )
2. Make sure that your TV is selected to view a
signal connected to the “Auxiliary A/V” or Line Input”.
Most TV’s have a function on the remote
control or front panel to select “TV, CATV or
Auxiliary”. Consult the Owner’s Manual for your
TV for programming.
3. Connect the RED Power jack cable from the Infrared
camera to the connector on the AC adapter, and plug in unit
4. Mount the pedestal stand on the wall or ceiling
using the 3 screws provided, and then mount the
camera on the bracket
Connection to a Video Surveillance Monitor
1. Connect the Yellow RCA cable from the Infrared camera to the
DIN-RCA cable adapter. Connect the other end of this cable
( 6 pin din) to the camera input on the back of the surveillance
monitor
2. Connect the RED Power jack cable from the Infrared camera
to the connector on the AC adapter, and plug in unit
3. Mount the pedestal stand on the wall or ceiling using the 3
screws provided, and then mount the camera on the
bracket
Specifications
Image Sensor: 1/3” B/W CCD
Picture Elements: 270,000 pixels
Infrared Illumination: 40 LED
Usable Illumination: 0.1 lux
Shutter: 1/60 ~ 1/100,000 seconds
Lens Type: 4.3 mm fixed
Viewing Angle: 60 degrees
Gain Control: AGC
Power Consumption: 5W
Power Supply: 12V
Operating Temperature: -10°C ~ +55°C
Dimensions ( W x H x D ): 86 x 97.5 x 105 mm
Weight: 270 grams
Warranty: Located on the reverse side
Distributed By:
MANSOOR ELECTRONICS LTD
310 Alden Road, Markham, Ontario, Canada L3R 4C1
Tel: (905) 475-8444 Fax: (905) 475-3576
Toll Free: 1-800-268-9852
www.mansoorelectronics.com
Operation with a Video Surveillance Monitor
Operation with a TV
