Hobbies & Helis Quick 30 Pro Datasheet
Exclusively Distributed by:
Hobbies & Helis International
201 south 3rd. st. & 309 north
Coopersburg, PA 18036
Phone: (610)-282-4811 Fax: (610)-282-4816
Website: http://www.hhiheli.com http://www.QuickHeli.com
Assembly Instructions & Parts Listing
Quick 30 Pre-Assembly Information
Quick Worldwide & Hobbies & Helis International:
Quick of Japan and Hobbies & Helis International teamed up to make
parts 6 years ago. In the beginning, our specialty was the manufacturing
of various upgrade parts for many of the plastic helicopters on the market.
After four years of distributing numerous upgrades and crash parts for other
helicopters, we decided to develop our own line of helicopters. That's when
the notion of the Quick 30 Pro was conceived. As the development of the
kit began, initial designs were approved, proto-types were made and
flown - all to ensure that the design was flawless. No minor details were
over-looked. After countless hours of hard work and dedication,
Hobbies & Helis is proud to release the first in a new standard in
Helicopters - the Quick 30 Pro.
Warning:
The radio-controlled model helicopter contained in this kit is not a toy.
Rather, it is a sophisticated piece of equipment. This product is not
recommended for use by children. Radio controlled models such as this
are capable of causing both property damage and/or bodily harm to both
the operator/assembler and/or spectator if not properly assembled and
operated. Hobbies & Helis assumes no liability for damage that could
occur from the assembly and/or use/misuse of this product.
AMA:
We strongly encourage all prospective and current R/C aircraft pilots to
join the Academy of Model Aeronautics. The AMA is a non-profit
organization that provides services to model aircraft pilots. As an AMA
member, you will receive a monthly magazine entitled Model
Aviation, as well as a liability insurance plan to cover against possible
accident or injury. All AMA charter aircraft clubs require individuals to
hold a current AMA sporting license prior to the operation of their model.
Pre-Assembly Information:
Quick Helicopters are put together with care and quality topping our
priority list. A recommendation when you are ready to begin building this
model is that you examine the kit and understand the contents of the
packages and read thoroughly before starting the assembly process.
Manual Index
Quick 30 Pre-Assembly Information............................. 2
Manual Index.........................................................................3
Quick 30 Features...............................................................4
Tools Needed.........................................................................5
Additional Parts Needed......................................................6
Optional Parts and Accessories.........................................7
Radio Requirements...............................................................8
Hardware Identification.........................................................9
Upper Frame Assembly......................................................10
Elevator Control....................................................................11
Install of Front Lowers Frames......................................12
Radio Bed & Gyro plate.................................................13
Tail Pulley & Main Gear................................................14
Clutch Lining & Clutch Bell..........................................15
Fan Cover, Motor Mount, & Fan Hub.......................16
Clutch, Motor, & Frame Rails........................................17
Servo Installation...................................................................18
Fuel Tank & Landing Gear.............................................19
Tail Case................................................................................20
Tail Boom & Boom Supports.........................................21
Tail Fins & Swashplate & Anti-Rotate Guide...........22
1. Heavy Duty Frame Construction: Quick 30 frames are made of the highest Quality
2000 series Aluminum. These frames are not only rigid but will provide excellent
vibration absorption.
2. One-Way Hex Start Shaft System: The one-way bearing allows the engine to
continue to run after the starter motor has been stopped.
3. Ball Bearing Idler Pulley: The ball bearing idler pulley provides smooth consistent
power to the tail by not allowing the belt to jump teeth.
4. Belt driven Tail: Belt Driven tail is not only a reliable way to drive a tail, but is also
very smooth and is low maintenance feature.
5. High Quality Ball Bearings: Quick 30 Pro offers ball bearings on all moving parts
unlike other machines.
6. EMS Collective System: The EMS Collective design allows ease of setup with fewer
moving parts. EMS constitutes overall design simplicty and represents the future of
helicopter technology.
7. Heavy-Duty Clutch System: Based on the same design as our famous heavy-duty
clutch upgrade that fits most popular machines, this clutch will give many years of
problem free operation.
8. Control Linkages: The control linkages that are provided with the Quick 30 Kit are
high quality 2.3mm stainless steel rods and the rod ends are made of a high quality
liquid Delrin.
9. Independent Blade Axle Design: The dual blade axle construction is pinned
above and below the centerline of the of the main blade grips. This rotor head design
far exceeds the quality of any rotor head on the market today.
10. Advanced Airfoil Flybar Paddles: These paddles will provide the best both kind of
flight characteristics 3D & Sport flying. Not only do they provide smooth forward flight,
they also provide quick response upon demand.
11. Rearward facing Engine Design: This design provides easy access to the glow
plug and is adventageous for easy engine removal.
12. This machine utilizes high quality, Machined parts which are also bright-dipped and
anodized for metal protection and beautiful appearance.
Quick 30 Features
Tools Needed to Assemble the Quick 30 Pro
Phillips Screw Driver Hobby Knife
EXL16030-1 $0.99
Metric Ruler
Scissors Nut Drivers
5.0mm WIH26550 $7.50
5.5mm WIH26555 $7.70
7.0mm. WIH26570 $7.90
Allen Drivers
1.5mm WIH26315 $4.10
2.0mm WIH26320 $3.80
2.5mm WIH26325 $3.80
3.0mm WIH26330 $3.90
Needle Nose Pliers
Piston Head Lock
HHI7020 $6.99
Carbon Paddle Gauges
HHI7000 $9.99
Pitch Gauge
HHI7001 $24.99
Bubble Blade Balancer
HHI7010 $39.99
High Point Balancer
DUB499 $29.99
Counter Balance Shaft
HHI7030 $18.99
Ball link Pliers
Mat1001 $39.99
Ball End Drivers
HHI7050 $14.99
Universal Flybar Lock
HHI7040 $24.99
Motor Requirements (Not Included)
Buliding Supplies (Essential)
Any .30 class motor
OS30 OSMG1940 $119.99
Glow Plug
OSMG2691 $6.25
Fuel Filter
QUI9002 $4.99
30 Size Muffler
HHI3004 $44.99
Spiral Wrap
HHI2809 $2.49
HHI2810 $2.49
CA Glue
GBG1 $6.29
Fuel Tubing
PRA7092 $2.49
JB Weld
JBW8265S $6.29
4" Small Wire Ties
HHIWT01 $2.49
Locktite
PT42
$2.99
Option Parts & Accessories
Receiver Wrap
HHI2008 $3.49
Receiver Hold Down Straps
HHI55** $4.99
2 Per Bag & Colors: Red,White,Purple,Black
Receiver Strong Box
HHI2200 $12.99
Mini Cock Striaght
TET4311 $15.99
Triangle Joint
TET4302 $8.99
Tube Ends
QUI9001 $3.99
Base Load Antenna
HHI5302 $19.99
Finishing Caps 20 Per Bag
HHIM1110* $1 1.99
Available in Purple,Gold,Clear
Anodizing
Quick 30 Pro Servo Arm Set
Call or E-mail $24.99
30 Size Skid Stops
HHI200* $6.99
Available in many Colors
See website or Call for Detail
Landing Gear Damp.
HHI2004 $14.99
Flybar Stiffeners
HHI4023 $16.99
Throttle Extension (OS)
HHI2550B $1 1.99
Radio Requirements
Radios:
Hobbies & Helis & it's distributors carry
various lines of helicopter radios. We
recommend the use of at least a 7 or 8
channel radio. Other radios support the EMS
Mixing but provide less of the essentail
functions that make flying more enjoyable. In
conclusion, any radio that supports EMS
mixing will work fine.
Servos:
This is the single most important function of
the helicopter. Any premium sport servo will
offer acceptable perfomance. However due
to the nature of EMS collective we suggest
the use of digital servos to enhance and
ensure match servo timing without servo
interaction.
Field Equipment
Hand Crank Pump
IMP66710 $27.99
Glow plug leads
HCAP2501 $6.99
or make your own.
Super-X Pump &
Switch SOTP1750
$29.95
Quick Field Charger
HCAM3000 $59.99
Power Panel
HCAP0305 $34.99
12V 15A Starter Battery
HCAP3305 $18.99
Torque Master 180
HCAP3305 $69.99
Standard Glow Starter
GPMP2022 $34.99
Field Box
HHI7500 $39.99
Hardware Identification
Note: Print this page and keep near by during the building process for the identification of all the hardware.
The drawings on this page are scaled so that you may hold the part to the picture for sizing.
Nuts & Lock Nuts
From Left to Right.
2.6mm Nut, 2.6mm Locknut, 3mm Nut, &
3mm Locknut
2.6mm Cap Head Bolts
2.6 X 10mm
2.6 X 6mm
3mm Cap Head Bolts
3 X 35mm
3 X 25mm
3 X 18mm
3 X 16mm
3 X 15mm
3 X 12mm
3 X 10mm
3 X 8mm
3 X 6mm
Set Screws
From left to right the sizes are:
3mm, 4mm
Washers
Nord Lock
Washers
3mm
Washers
2mm Phillips
Head Screws
Screws
Self-Tap
Screws
Other Hardware
Pivot Ball
3 X 4mm
Standard
Shim Ball
Step 1: Upper Frame & Bearing Block Assembly
Read the entire manual first to get an idea of the machine's makeup, each step will
contain a parts list, a text description of the assembly, and pictures to illustrate the
construction. If there are any questions or concerns call or E-mail us and will be happy
help. Also, if possible, print this manual in color because we have some things color-coded.
It is also recommended that you degrease your bolts with acetone or rubbing alcohol and use
blue (242) locktite. The alcohol/acetone helps the locktite stick.
Main Shaft
Bearing Blocks (2)
Clutch Bell
Bearing Block (1)
Counter Gear
Assm. &
BRG. Block (1)
Parts List
5 X 10 X 4mm
Bearings Flanged (2)
3 X 8mm
Cap Head Bolts (20)
Upper Frames (2)
1 - Locate both upper frames install the 5 X 10 X 4mm Bearings
with flanged portion of the bearing facing toward inside
(Hole ID Yellow).
2 - It is necessary that the ridge portion of the Main shaft bearing
blocks face each other on all installation. The ridge is identified
as the side which only a portion of the bearing can be viewed.
3 - Begin installing the main shaft bearing blocks on half of the
frame (RED). Next Install the Clutch bell bearing block with the
smaller inside hole facing up (BLUE). Now install the Counter
gear Assm. w/Brg. block. (GREEN)
Note: If Bearings are a tight fit, use round file or fine sand paper rolled in to a tube
and lightly sand until proper fit is acquired.
Table of contents
Other Hobbies & Helis Toy manuals
