Hitachi Eco Compact PC-ARC-A User manual

ORIGINAL INSTRUCTIONS

A12109660A

–

OPERATION MANUAL

–

Eco Compact

Wired Remote Controller

MODELS

PC-ARC-A

PC-ARC-M

PC-ARC-U

Table of Contents

1. Safety Summary ............................................................................................................................................................... 1

2. Setting Names and Functions.......................................................................................................................................... 7

3. Operation Method............................................................................................................................................................ 8

3.1 Operation Mode (Cool, Heat, Dry, Cool and Heat Automatic and Fan Operation).................................................. 8

3.2 Temperature Setting.................................................................................................................................................. 9

3.3 Fan Speed Setting .................................................................................................................................................... 10

3.4 Louver Swing Direction............................................................................................................................................ 11

3.5 Operation ................................................................................................................................................................. 12

3.6 Icon Description ....................................................................................................................................................... 14

4. Menu Operation.............................................................................................................................................................. 16

4.1 Simple Timer Setting ............................................................................................................................................... 17

4.2 GentleCool Comfort Setting .................................................................................................................................... 19

4.3 Capacity Control Setting.......................................................................................................................................... 20

4.4 Sleep Mode Setting.................................................................................................................................................. 21

4.5 AutoBoost Setting.................................................................................................................................................... 23

4.6 Operation Schedule Setting .................................................................................................................................... 24

5. Detailed Menu Operation............................................................................................................................................... 25

5.1 Run Indicator Setting............................................................................................................................................... 26

5.2 Capacity Control Details Setting ............................................................................................................................. 27

5.3 GentleCool Comfort Details Setting........................................................................................................................ 28

Table of Contents Table of Contents

5.4 Sleep Mode Details Setting...................................................................................................................................... 29

5.5 Operation Sound Setting......................................................................................................................................... 30

5.6 IR Receiver Setting ................................................................................................................................................... 31

6. Clock Setting................................................................................................................................................................... 33

7. Operation Schedule Details Setting............................................................................................................................... 35

8. Individual Louver Setting............................................................................................................................................... 37

8.1 Individual Louver Setting ........................................................................................................................................ 37

8.2 Cancel Individual Louver Setting ............................................................................................................................ 38

9. Filter Reminder Reset Setting........................................................................................................................................ 39

10. In Alarm Condition ....................................................................................................................................................... 39

10.1 Power Failure.......................................................................................................................................................... 40

10.2 Electromagnetic Interference (EMI) ...................................................................................................................... 40

1. Safety Summary

Singal Words

Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

Indicates information considered important, but not hazard-related (for example,

messages relating to property damage).

For the operation of the product, please read and follow this safety summary strictly. Otherwise, improper operation may cause

injury or death.

1. Safety Summary 1. Safety Summary

General Precautions

To reduce the risk of serious injury or death, read these instructions thoroughly and follow

all warnings or cautions included in all manuals that accompanied the product and are

attached to the unit. Refer back to these safety instructions as needed.

• This system, including this controller, should be installed by personnel certied by Johnson Controls-Hitachi Air Conditioning.

Personnel must be qualied according to local, state, and national building and safety codes and regulations. Incorrect

installation could cause leaks, electric shock, re, or an explosion. In areas where Seismic Performance requirements are

specied, the appropriate measures should be taken during installation to guard against possible damage or injury that might

occur in an earthquake. If the unit is not installed appropriately correctly, injuries may occur because of a falling unit.

• Use appropriate Personal Protective Equipment (PPE), such as gloves, protective goggles, and electrical protection equipment

and tools suited for electrical operation purposes.

• When transporting, be careful when picking up, moving and mounting these units. Although the controller may be packed

using plastic straps, do not use them for transporting from one location to another.

Do not stand on or put any material on the controller.

• When installing the controller cabling to the units, do not touch or adjust any safety devices inside the indoor or outdoor units.

All safety features, disengagement, and interlocks must be in place and functioning correctly before the equipment is put into

operation. If these devices are improperly adjusted or tampered with in any way, a serious accident can occur. Never bypass,

wire around, or jump-out any safety device or switch.

• Use only Johnson Controls-Hitachi Air Conditioning recommended, provided as standardized, or replacement parts.

• Johnson Controls-Hitachi Air Conditioning will not assume any liability for injuries or damage caused by not following steps

outlined or described in this manual. Unauthorized modications to Johnson Controls-Hitachi Air Conditioning products are

prohibited as they…

○May create hazards that could result in death, serious injury or equipment damage;

○Will void product warranties;

○May invalidate product regulatory certifications.

1. Safety Summary

Take the following precautions to reduce the risk of property damage.

• Do not touch the main circuit board or electronic components in the controller or remote devices.

Make sure that dust and/or steam does not accumulate on the circuit board.

• When installing the unit in a hospital or other facility where electromagnetic waves are generated from nearby medical and/or

electronic devices, be prepared for noise and Electromagnetic Interference (EMI). Do not install where the waves can directly

radiate into the electrical box, controller cable, or controller. Inverters, appliances, high-frequency medical equipment, and

radio communications equipment. EMI may cause the unit to malfunction. The operation of the unit may also adversely aect

these same devices. Install the unit at least 10 . (approximately 3m) away from such devices.

• Locate the controller at a distance of at least 3 . (approximately 1m) from the electric lighting. Otherwise, the receiver part of

the controller may have diiculty receiving operation commands.

• If the wired controller is installed in a location where electromagnetic energy is generated, make sure that the wired controller

is shielded and cables are sleeved inside conduit tubing.

• If there is a source of electrical interference near the power source, install noise suppression equipment (lter).

• During the test run, check the unit’s operation temperature. If the unit is used in an environment where the temperature

exceeds the operation boundary, it may cause severe damage. Check the operation temperature boundary in the manual. If

there is no specied temperature, use the unit within the operation temperature boundary of 32°F to 104°F (0°C to 40°C).

• Perform properly electrical wiring work. The details of the electrical wiring connection are described in the "Electrical Wiring"

of corresponding Installation and Maintenance Manual.

• The Eco compact wired remote controller has near eld communication (NFC), which can improve service and installation. If

the wired remote controller may be accessible to unauthorized third-party, please set the NFC to "Disable" by referring to the

installation manual.

1. Safety Summary 1. Safety Summary

Installation Precautions

Take the following precautions to reduce the risk of electric shock, fire, or explosion

resulting in serious injury or death:

• If the remote sensors are not used with this controller, then do not install this controller…

○In a room where there is no thermostat.

○Where the unit is exposed to direct sunshine or direct light.

○Where the unit is in close proximity to a heat source.

○Where hot/cold air from the outdoors, or a draft from elsewhere (such as air vents, diffusers, or grilles) can affect air

circulation.

○In areas with poor air circulation and ventilation.

• Perform a test run using the controller to ensure normal operation. Safety guards, shields, barriers, covers, and protective

devices must be in place while the compressor/unit is operating. During the test run, keep ngers and clothing away from any

moving parts.

After installation work for the system has been completed, explain the "Safety Precautions," use, and maintenance of the unit to

the customer according to the information in all manuals that accompanied the system. All manuals and warranty information

must be given to the user or left near the Indoor Unit.

1. Safety Summary

Electrical Precautions

Take the following precautions to reduce the risk of electric shock, fire, or explosion

resulting in serious injury or death:

• Only use electrical protection equipment and tools suited for this installation.

• Insulate the wired controller against moisture and temperature extremes.

• Use specied cables between units and the controller.

• Communication cabling must be a minimum of 18-Gauge, 2-Conductor, Stranded Copper.

Shielded cable must be considered for applications and routing in areas of high EMI and other sources of potentially excessive

electrical noise to reduce the potential for communication errors. When shielded cabling is applied, proper bonding and

termination of the cable shield is required as per Johnson Controls-Hitachi Air Conditioning guidelines. Plenum and riser

ratings for communication cables must be considered per application and local code requirements.

• The polarity of the input terminals is important, so be sure to match the polarity when using contacts that have polarity.

•

Highly dangerous electrical voltages may be used in this system. Carefully refer to the wiring diagram and these instructions when

wiring. Improper connections and inadequate grounding can cause serious injury or death.

• Before installing the controller or remote devices, ensure that the indoor and outdoor unit operation has been stopped.

Further, be sure to wait at least ve minutes before turning o the main power switch to the indoor or outdoor units.

Otherwise, water leakage or electrical breakdown may result.

•

Do not open the service cover or access panel to the indoor or outdoor units without turning OFF the main power supply. Before

connecting or servicing the controller or cables to indoor or outdoor units, open and tag all disconnect switches. Never assume

electrical power is disconnected. Verify with a meter and equipment.

• Use an exclusive power supply at the controller’s rated voltage.

• Be sure to install circuit breakers (ground fault interrupter, isolating switch, molded case circuit breaker, and so forth) with the

specied capacity. Ensure that the wiring terminals are tightened securely to recommended torque specications.

1. Safety Summary 1. Safety Summary

• Clamp electrical wires securely with a cord clamp aer all wiring is connected to the terminal block.

In addition, run wires securely through the wiring access channel.

• When installing the power lines, do not apply tension to the cables. Secure the suspended cables at regular intervals, but not

too tightly.

• Make sure that the terminals do not come into contact with the surface of the electrical box.

If the terminals are too close to the surface, it may lead to failures at the terminal connection.

• Do not pour water on the controller as it could cause electric shock and/or damage the unit.

Do not use strong detergent such as a solvent. Clean with a so cloth.

• Check that the ground wire is securely connected. Do not connect ground wiring to gas piping, water piping, lighting

conductor, or telephone ground wiring.

2. Setting Names and Functions

The gure below shows all the functions for reference. The actual display during operation is dierent.

NOTES:

• The backlight turns o 30 seconds aer the last operation. If you press any button, the backlight is turned on.

(The button pressed to turn on the backlight is not functional.)

• Make sure to press the buttons lightly with your ngertips.

• Do NOT press the buttons or anything with sharp points, such as a ball point pen. The operational functionality

of the wired remote controller may become damaged.

Operation Component

Display Part

ON/OFF Button

Operation Mode Button

Fan Speed Button

Menu Button

Directional Key

Current Time

Louver Direction

Operation Mode

Run Indicator

Set Temperature

Fan Speed

Other manuals for Eco Compact PC-ARC-A

This manual suits for next models

Table of contents

Other Hitachi Controllers manuals

Hitachi

Hitachi HIDIC EH-150 Instructions for use

Hitachi

Hitachi H8/3637 User manual

Hitachi

Hitachi HX-CP1S08-0 User manual

Hitachi

Hitachi EHV+ Series Instructions for use

Hitachi

Hitachi HIDIC EH150 EN-TRMME Instructions for use

Hitachi

Hitachi STARTSP14N001 User manual

Hitachi

Hitachi EH-150 Type I Instructions for use

Hitachi

Hitachi EH-RMP2 Instructions for use

Hitachi

Hitachi HIDIC EH-150 Instructions for use

Hitachi

Hitachi PSC-A128WEB3 User manual

Hitachi

Hitachi H Series User manual

Hitachi

Hitachi RWM-2R1E User manual

Hitachi

Hitachi ATW-YCC-03 User manual

Hitachi

Hitachi HD44780 User manual

Hitachi

Hitachi EH-150 Series User manual

Hitachi

Hitachi LQZ700 User manual

Hitachi

Hitachi HIDIC EH-150 Instructions for use

Hitachi

Hitachi HIDIC EH-150 Instructions for use

Hitachi

Hitachi H20-T Specification sheet

Hitachi

Hitachi PC-ARFG-E User manual

Hitachi

Hitachi PSC-A64S User manual

Hitachi

Hitachi SPX-WDC5 User manual

Hitachi

Hitachi HCWA10NEGQ User manual

Hitachi

Hitachi PC-ARF1 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual