Hitachi RAS-10C9 User manual

– 1 –

SPLIT TYPE

INDOOR UNIT/OUTDOOR UNIT

OUTDOOR UNIT INDOOR UNIT

RAS-10C9

RAS-13C9

RAC-10C9

RAC-13C9

Instruction manual Page 1~22

To obtain the best performance and ensure years of trouble free use, please read this instruction manual

completely.

Arahan pengendalian Muka surat 23~44

Untuk mendapatkan prestasi yang tinggi dan mengelakkan masalah untuk jangka masa yang lama, sila baca

arahan ini sepenuhnya.

MODEL

RAS-10C9/RAC-10C9

RAS-13C9/RAC-13C9

– 2 –

●

Please read the “Safety Precaution” carefully before operating the unit to ensure correct usage of the unit.

●

Pay special attention to signs of “ Warning” and “ Caution”. The “Warning” section contains matters which,

if not observed strictly, may cause death or serious injury. The “Caution” section contains matters which may

result in serious consequences if not observed properly. Please observe all instructions strictly to ensure safety.

●

The sign indicate the following meanings.

●

Please keep this manual after reading.

SAFETY PRECAUTION

WARNING

PRECAUTIONS DURING INSTALLATION

●Do not reconstruct the unit.

Water leakage, fault, short circuit or fire may occur if you reconstruct

the unit by yourself.

●Please ask your sales agent or qualified technician for the installation

of your unit. Water leakage, short circuit or fire may occur if you install

the unit by yourself.

●Please use earth line.

Do not place the earth line near water or gas pipes, lightning-conductor,

or the earth line of telephone. Improper installation of earth line may

cause electric shock.

●A circuit breaker should be installed depending on the mounting site of

the unit. Without a circuit breaker, the danger of electric shock exists.

●Do not install near location where there is flammable gas. The outdoor

unit may catch fire if flammable gas leaks around it.

●Please ensure smooth flow of water when installing the drain hose.

CAUTION

PRECAUTIONS DURING SHIFTING OR MAINTENANCE

PRECAUTIONS DURING OPERATION

●Avoid an extended period of direct air flow for your health.

●Should abnormal situation arises (like burning smell), please stop operating the unit

and turn off the circuit breaker. Contact your agent. Fault, short circuit or fire may

occur if you continue to operate the unit under abnormal situation.

●Please contact your agent for maintenance. Improper self maintenance may cause

electric shock and fire.

●Please contact your agent if you need to remove and reinstall the unit. Electric

shock or fire may occur if you remove and reinstall the unit yourself improperly.

●Do not put objects like thin rods into the panel of blower and suction side

because the high-speed fan inside may cause danger.

●During thunder storm, disconnect and turn off the circuit breaker.

●Do not use any conductor as fuse wire, this could cause fatal accident.

Make sure to connect earth line.

Indicates the instructions that must be followed.

The sign in the figure indicates prohibition.

ENGLISH

– 3 –

PRECAUTIONS DURING OPERATION

●Do not attempt to operate the unit with wet hands, this could cause fatal

accident.

●When operating the unit with burning equipments, regularly ventilate the

room to avoid oxygen insufficiency.

●Do not direct the cool air coming out from the air-conditioner panel to face

household heating apparatus as this may affect the working of apparatus

such as the electric kettle, oven etc.

●Do not place plants directly under the air flow as it is bad for the plants.

●Please ensure that outdoor mounting frame is always stable, firm and

without defect. If not, the outdoor unit may collapse and cause danger.

●Do not splash or direct water to the body of the unit when cleaning it as this

may cause short circuit.

●When operating the unit with the door and windows opened, (the room humidity is always above

80%) and with the air deflector facing down or moving automatically for a long period of time,

water will condense on the air deflector and drips down occasionally. This will wet your furniture.

Therefore, do not operate under such condition for a long time.

●If the amount of heat in the room is above the cooling or heating capability of the unit (for

example: more people entering the room, using heating equipments and etc.), the preset room

temperature cannot be achieved.

●Do not climb on the outdoor unit or put objects on it.

●Please switch off the unit and turn off the circuit breaker during cleaning, the

high-speed fan inside the unit may cause danger.

●Turn off the circuit breaker if the unit is not to be operated for a long period.

●The product shall be operated under the manufacturer specification and

not for any other intended use.

●Do not put water container (like vase) on the indoor unit to avoid water

dripping into the unit. Dripping water will damage the insulator inside the unit

and causes short-circuit.

●Do not use any aerosol or hair sprays near the indoor unit. This chemical

can adhere on heat exchanger fin and blocked the evaporation water flow

to drain pan. The water will drop on tangential fan and cause water splashing

out from indoor unit.

– 4 –

INDOOR UNIT

OUTDOOR UNIT

WIDTH (mm)MODEL

RAS-10C9 / 13C9

RAC-10C9 / 13C9

HEIGHT (mm) DEPTH (mm)

MODEL NAME AND DIMENSIONS

NAMES AND FUNCTIONS OF EACH PART

AIR FILTER

To prevent dust from coming into the indoor unit.

(Refer page 17)

FRONT PANEL (AIR INLET).

INDOOR UNIT INDICATORS

Light indicator showing the operating condition.

(Refer page 5)

HORIZONTAL DEFLECTOR ●VERTICAL

DEFLECTOR (AIR OUTLET)

(Refer page 12)

REMOTE CONTROL

Send out operation signal to the indoor unit. So as to

operate the whole unit.

(Refer page 6)

860

700

285

570

188

210

DRAIN PIPE

Condensed water drain to outside.

CONNECTING CORD

AIR INLET (BACK, LEFT SIDE)

AIR OUTLET

ENGLISH

– 5 –

HITACHI

INDOOR UNIT INDICATORS

AUTO RESTART SWITCH

●In the event of power failure, the air conditioner will restart automatically in the previously selected mode once

the power is restored.

●In the event of power failure during TIMER operation, the timer will be reset and the unit will begin or stop

operating under a new timer setting.

OPERATION INDICATOR

●This figure shows the opening condition of

front panel. Refer to page 20 in relation to

how to open or close the front panel.

OPERATION LAMP

This lamp lights during operation.

TIMER LAMP

This lamp lights when the timer is working.

FILTER LAMP

When the device is operated for a total of about 200

hours, the FILTER lamp lights to indicate that it is time

to clean the filter. The lamp goes out when the POWER

SWITCH set to OFF and ON again.

TEMPORARY / AUTO RESTART

TEMPORARY / AUTORESTART

TEMPORARY SWITCH

●By setting the temporary switch, the operation is done in previously set operation mode.

●When the operation is done using the temporary switch after the power source is turned off and turn on again,

the operation is done in automatic mode.

Use this switch to start and stop when the remote controller does not work.

–6 –

NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT

■This controls the operation function and timer setting of the room air conditioner. The range of

control is about 4 meters. If indoor lighting is controlled electronically, the range of control may be

shorter.

Precautions for Use

●Do not put the remote controller in direct

sunlight and high temperature.

●Do not drop it on the floor, and protect

it from water.

●If you press the FUNCTION selector

button during operation, the air

conditioner may stop for about 3 minutes

for protection before you can start it

again. (unless you turn off and on again

the power source)

You can use the remote controller by fixing it on the

wall with the accessory parts.

●Before fixing it,

make sure the

unit can be

controlled by the

remote control

unit at the fixing

position.

REMOTE

CONTROLLER

HOLDER

ENGLISH

–7 –

AUTOMATIC OPERATION

■The device will automatically determine the operation mode either COOL or DEHUMIDIFY, depending

on the initial room temperature.

Press the (START/STOP) button

●Operation start with a “beep”.

Press the (START/STOP) button

●Please make sure you have been selected the (Automatic) mode

by use the (FUNCTION) Button.

●The fan speed selector does not work at this operation.

STOP

Press the (ROOM TEMPERATURE) button

●Temperature setting change by 1°C for each 1 time press.

Down

●You can raise or lower the temperature setting by a maximum of

3°C.

●The display does not indicate the preset temperature in the Automatic

mode. Device will receive the setting by a “beep”.

■You can slightly adjust the room temperature.

■CONDITION OF AUTOMATIC OPERATION

●The selected mode of operation will not change during the operation even though the room

temperature change.

Over 27°C COOL

16 ~ 27°C

FUNCTION

27°C

Slightly lower than the

room temperature LOW

FAN SPEED

HIGH at start, MEDIUM or

LOW after the preset

temperature is reached

DEHUMIDIFY

INITIAL ROOM

TEMPERATURE (APPROX.)

TEMPERATURE

SETTING

▲ ▲

–8 –

CIRCULATION OPERATION

■When the room temperature is higher than the thermostat set temperature, only the fan operates to

circulate the upper hotter air downwards. This makes temperature distribution of the room evenly at

heating.

Press the (START/STOP) button

●Operation start with a signal received sound “beep”.

Press the (START/STOP) button

●Make sure you have been select the (Circulate) mode by using

the (FUNCTION) Button.

●You can select the fan speed and desired temperature.

●This operation is useful in winter when using other heating equipment.

STOP

HOW TO SET THE SLEEP TIMER

Mode

Sleep timer

Indication

1 hour 2 hours 3 hours 7 hours

Sleep timer off

44 44

Sleep Timer: The device will continue working for the designated

number of hours and then turn off.

Point the signal window of the remote controller toward the indoor

unit, and press the SLEEP button.

The timer information will be displayed on the remote controller.

The TIMER lamp lights with a beep from the indoor unit.

How to Cancel Reservation

Point the signal window of the remote controller toward the indoor unit, and press the (CANCEL)

button.

The (RESERVED) sign goes out with a beep and the (TIMER) lamp turns off on the indoor unit.

NOTE

If you set the sleep timer when the off-timer or

on/off-timer has been set earlier, the sleep timer

becomes effective instead of the off- or on/off-

timer set earlier.

Example: Setting 3 hours

sleep time.

ENGLISH

–9 –

Cooling

“”

and

dehumidifying

“”

Explanation of the sleep timer

The device will control the FAN SPEED and room temperature automatically

so as to be quiet and good for people’s health.

You can set the sleep timer to turn off after 1, 2, 3 or 7 hours. The FAN

SPEED and room temperature will be controlled as shown below.

Function Operation

The settings of room temperature and circulation are not varied.

The FAN SPEED will be set to

LOW immediately.

Fan

“”

Operation with the sleep timer

Sleep

timer set

1 hour 3 hours later

7 hours later

2 hours

later

6 hours

later

–10 –

MANUAL OPERATION [Cooling ●Dehumidify ●Circulation]

■Please use under below condition when you want to set the function mode, room temperature and

fan speed by manually.

DEHUMIDIFYING

Room Temperature 16°C above

COOLING

Outdoor Temperature 22-42°C

OPERATION MODE SELECTION

●Every time you press the button, the mode will change as the below

sequence

(Auto) [(Cool) [(Dehumidify) [(Circulation)

Press the (START/STOP) button

●Operation start with a signal received sound “beep”.

Press the (START/STOP) button

●As the settings are stored in memory in the remote control unit, you

only have to press the (Start/Stop) button next time.

STOP

ROOM TEMPERATURE SETTING

Down

●The cooling operation does not start if the

temperature setting is higher than the current

room temperature.

Dehumidify 16~26°C

Cooling 25~28°C

▲ ▲

FAN SPEED SETTING

●Every time you press the button, fan speed will change as the below sequence.

●COOLING

CIRCULATION

NOTE

(Auto) : The FAN SPEED is HIGH at first and varies to MED or LOW

automatically when the preset temperature has been reached.

●DEHUMIDIFYING : LOW (FIXED)

: ( )

}

Dehumidify Function

When the room temperature is higher than the temperature setting: The device will dehumidify the room,

reducing the room temperature to the preset level.

When the room temperature is lower than the temperature setting: Dehumidifying will be performed with

the room temperature set slightly lower than the current room temperature, whatever the temperature

setting. The function will stop (the indoor unit will stop emitting air) as soon as the room temperature

becomes lower than the setting.

:AUTO [HIGH [MED [LOW

:( [[[)

■Recommend Temperature

This manual suits for next models

Table of contents

Other Hitachi Air Conditioner manuals

Hitachi

Hitachi RAK-DJ25PCAT User manual

Hitachi

Hitachi RAM-200FSPH User manual

Hitachi

Hitachi RAC-70YH7 User manual

Hitachi

Hitachi RPIL-3.0UFE1NH User manual

Hitachi

Hitachi RAC-18WPD User manual

Hitachi

Hitachi airHome 600 RAK-VJ10PCAST User manual

Hitachi

Hitachi UTOPIA IVX PREMIUM User manual

Hitachi

Hitachi RAC-08CH8 User manual

Hitachi

Hitachi RAS-5111CS User manual

Hitachi

Hitachi RAS-25YHA User manual

Hitachi

Hitachi RAK-18PPA User manual

Hitachi

Hitachi RAC-25WXA User manual

Hitachi

Hitachi PH Series User manual

Hitachi

Hitachi RAK-18RPD User manual

Hitachi

Hitachi RAS-24G5 User manual

Hitachi

Hitachi RAF-50NX2 User manual

Hitachi

Hitachi RAK-18PPA User manual

Hitachi

Hitachi RAS-D10EX3 User manual

Hitachi

Hitachi RPI-30MH1 User manual

Hitachi

Hitachi RAC-DJ18PHAE User manual

Hitachi

Hitachi RAK-18NH6 User manual

Hitachi

Hitachi RAM-71QH5 User manual

Hitachi

Hitachi air Home 100 RAK-BJ10PCAST User manual

Hitachi

Hitachi RAC-25RPA User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual

Webasto

Webasto Frigo Top 25 DS Instructions for use