Hirschmann OCTOPUS 8M Series User manual

Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013

Technical Support

https://hirschmann-support.belden.eu.com

User Manual

Installation

IP65/67 Switch

OCTOPUS 8M..., OCTOPUS 16M..., OCTOPUS 24M...,

OCTOPUS OS32...

U :24 - 48 V CLASS2 I :0,5 - 0,1 A

in in

OCTOPUS 8M

OCTOPUS 24M-Train-BP

OCTOPUS 24M

OCTOPUS 16M-Train-BP

OCTOPUS 16M

OCTOPUS 8M

OCTOPUS OS32-081602O6O6...

OCTOPUS OS32-081602T6T6...

P1 P2 RM FAULT

V.2 4

ACA

Power

Managed

ETHERNET Switch

x y

OCTOPUS

OS32

Produktcode

IP-ADDRESS

FunctionPin

N.C.

GND

+48V DC

FunctionPin

FAULT 3

TP-Ports

P1 P2 RM FAULT

V.2 4

ACA

Power

Managed

ETHERNET Switch

x y

OCTOPUS

OS32

Produktcode

IP-ADDRESS

FunctionPin

N.C.

GND

+48V DC

FunctionPin

FAULT 3

TP-Ports

FunctionPin

1 MDX1+

2 MDX1 -

3 MDX0+

4 MDX0 -

5 MDX2+

6 MDX2 -

7 MDX3 -

8 MDX3+

Managed IP67

ETHERNET Switch

FunctionPin

N.C.

GND

FunctionPin

+24V DC

+24V DC FAULT

U :24 - 48 V CLASS 2 I : 0,27 - 0,14 A

in in

OCTOPUS 16M-Train-BP

FunctionPin

TD +

RD +

TD −

RD −

Bypass Function:

Power off

Port 4

Port 8

Managed IP67

ETHERNET Switch

FunctionPin

N.C.

GND

FunctionPin

+24V DC

+24V DC FAULT

U :24 - 48 V CLASS 2 I : 0,27 - 0,14 A

in in

OCTOPUS 24M-Train-BP

FunctionPin

TD +

RD +

TD −

RD −

Bypass Function:

Power off

Port 4

Port 8

U :24 - 48 V CLASS2 I :1,1 - 0,2 A

in in

OCTOPUS 8M

U :24 - 48 V CLASS2 I :1,4 - 0,25 A

in in

OCTOPUS 8M

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD/DVD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann.com).

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 (0)1805 14-1538

Installation 039 679-002-11-0113 -22.3.13

Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013 3

Contents

Safety instructions 5

About this Manual 10

Legend 10

1 Device description 11

1.1 General device description 11

1.2 Description of the device variants 12

1.2.1 Devices without Power over Ethernet 12

1.2.2 Devices with Power over Ethernet 13

1.3 Power supply 14

1.4 PoE supply voltage (optional) 14

1.5 Interfaces 15

1.5.1 10/100 Mbit/s twisted pair connection

(4-pin M12 connector, D-coded) 15

1.5.2 10/100 Mbit/s twisted pair connection for PoE

(4-pin M12 sockets) 15

1.5.3 10/100/1000 Mbit/s twisted pair connection

(8-pin M12 connector, X-coded) 16

1.5.4 100/1000 Mbit/s FO connection

(SFP, IP67-V1 connector based on IEC 61076-3-

106, variant 1) 17

1.5.5 “FAULT” signal contact 18

1.5.6 ACA interface (ACA21-M12) 18

1.5.7 V.24 interface (external management) 19

1.6 Display elements 20

2 Device installation 22

2.1 Unpacking and checking 22

2.2 Installing the SFP transceivers (optional) 22

2.3 Connecting the connector for

supply voltage and signal contact 23

2.4 Installing the device and grounding 24

2.4.1 Installing the device 24

2.4.2 Grounding the device 25

2.5 Connecting the PoE supply voltage (optional) 25

4Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013

2.6 Connecting the supply voltage, starting up 26

2.7 Connecting the data lines 27

3 Basic set-up 28

4 Monitoring the ambient air temperature 30

5 Maintenance and service 31

6 Disassembling the SFP transceivers (optional) 32

7 Technical data 33

A Further Support 45

Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013 5

Safety instructions

Certified usage

Only use the device for application cases that are described in the

Hirschmann product information, including this manual. Only operate the

device according to the technical specifications.

Operational environment:

In the inside of vehicles

In the inside of buildings

Supply voltage

For safety reasons the devices have been designed to operate at low

voltages. Thus, they may only be connected to the supply voltage

connections and to the signal contact with SELV circuits with the voltage

restrictions in accordance with IEC/EN 60950-1.

The supply voltage is electrically isolated from the housing.

Use undamaged parts.

Only use voltage supply cables with the permitted diameter specified

by the manufacturer of the right angled cable socket.

Relevant for North America:

Devices without Power-over-Ethernet (PoE) may only be connected to

a supply voltage of class 2 that fulfills the requirements of the National

Electrical Code, Table 11(b). If the voltage is being supplied

redundantly (two different voltage sources), the combined supply

voltages must fulfill the requirements of the National Electrical Code,

Table 11(b).

Relevant for North America: For use in Class 2 circuits.

Only use copper wire/conductors of class 1, 75 °C (167 °F).

Relevant for North America

for devices certified for hazardous locations:

Power, input and output (I/O) wiring must be in accordance with

Class I, Division 2 wiring methods [Article 501-4(b) of the National

Electrical Code, NFPA 70] and in accordance with the authority having

jurisdiction.

Shielding ground

Note: The shielding ground of the connectable twisted pair lines is

connected to the housing as a conductor.

Beware of possible short circuits when connecting a cable section with

conductive shielding braiding.

6Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013

Housing

Only technicians authorized by the manufacturer are permitted to open

the housing.

The surfaces of the device housing may become hot. Avoid touching the

device while it is operating. Wait until the device has cooled down.

Environment

Operate the device at the specified surrounding air temperature

(temperature of the surrounding air at a distance of up to 1.97 in (5 cm)

from the device) and relative air humidity specified in the technical data.

Install the device in a location where the climatic threshold values

specified in the technical data are adhered to. Make sure the

environment does not heat the device. It can be mounted on

temperature-isolating material.

Use the device in an environment within the pollution degree specified

in the technical data.

Qualification requirements for personnel

Qualified personnel as understood in this manual and the warning signs,

are persons who are familiar with the setup, assembly, startup, and

operation of this product and are appropriately qualified for their job. This

includes, for example, those persons who have been:

trained or directed or authorized to switch on and off, to ground and to

label power circuits and devices or systems in accordance with current

safety engineering standards;

trained or directed in the care and use of appropriate safety equipment

in accordance with the current standards of safety engineering;

trained in providing first aid.

General safety instructions

Please note that products recommended as accessories may have

characteristics that do not fully correspond to those of the corresponding

product. This may limit their possible usage in the overall system.

This device is operated by electricity. You must follow precisely the

prescribed safety requirements for the voltage connections in this

document.

See “Supply voltage” on page 5.

Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013 7

Non-observance of these safety instructions can cause material damage

and/or injuries.

Only appropriately qualified personnel should work on this device or in

its vicinity. The personnel must be thoroughly familiar with all the

warnings and maintenance procedures outlined in this operating

manual.

The proper and safe operation of this device depends on proper

handling during transportation, proper storage and assembly, and

conscientious operation and maintenance procedures.

Never start operation with damaged components.

Only use the devices in accordance with this manual. In particular,

observe all warnings and safety-related information.

Any work that may be required on the electrical installation may only

be carried out by personnel trained for this purpose.

Relevant for OCTOPUS OS32-08xx02O6O6...:

Note: LED or LASER components in compliance with IEC 60825-1

(2007):

CLASS 1 LASER PRODUCT

CLASS 1 LED PRODUCT

National and international safety regulations

Make sure that the electrical installation meets local or nationally

applicable safety regulations.

E marking

The labeled devices comply with the regulations contained in the following

European directive(s):

72/245/EWG, 2009/19/EG

Guideline for standardizing the regulations of member states relating to

radio interference from motor vehicles. Certified devices are marked with

an e1 type approval indicator.

(Relevant for OCTOPUS 8M-8PoE, OCTOPUS 8M-6PoE, OCTOPUS

16M-8PoE, OCTOPUS 24M-8PoE)

Rule No. 10 of the Economic Commission for Europe (ECE): Devices with

a certification are labelled with the E type-approval mark.

(Relevant for OCTOPUS OS32...)

Note: For use in connection with a suitable type approved power supply

only.

8Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013

CE marking

The labeled devices comply with the regulations contained in the following

European directive(s):

2011/65/EU (RoHS)

Directive of the European Parliament and of the Council on the restriction

of the use of certain hazardous substances in electrical and electronic

equipment.

2004/108/EG (EMV)

Directive of the European Parliament and the council for standardizing the

regulations of member states with regard to electromagnetic

compatibility.

In accordance with the above-named EU directive(s), the EU conformity

declaration will be at the disposal of the relevant authorities at the

following address:

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 (0)1805 14-1538

The device can be used in the industrial sector.

Interference immunity: EN 61000-6-2

Emitted interference: EN 55022

Warning! This is a class A device. This device can cause interference in

living areas, and in this case the operator may be required to take

appropriate measures.

Note: The assembly guidelines provided in these instructions must be

strictly adhered to in order to observe the EMC threshold values.

Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013 9

FCC note

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference; (2) this device must accept any interference received,

including interference that may cause undesired operation.

Appropriate testing has established that this device fulfills the

requirements of a class A digital device in line with part 15 of the FCC

regulations.

These requirements are designed to provide sufficient protection against

interference when the device is being used in a business environment.

The device creates and uses high frequencies and can also radiate high

frequencies, and if it is not installed and used in accordance with this

operating manual, it can cause radio transmission interference. The use

of this device in a living area can also cause interference, and in this case

the user is obliged to cover the costs of removing the interference.

Recycling note

After usage, this device must be disposed of properly as electronic waste,

in accordance with the current disposal regulations of your county, state,

and country.

10 Installation OCTOPUS 8M/16M/24M/OS32

Release

01/2013

About this Manual

The “Installation” user manual contains a device description, safety

instructions, a description of the display, and the other information that you

need to install the device.

The following manuals are available as PDF files on the CD/DVD supplied:

Installation user manual

Basic Configuration user manual

Redundancy Configuration user manual

Reference manual for the graphical user interface

Command Line Interface user manual

The Industrial HiVision Network Management Software provides you with

additional options for smooth configuration and monitoring:

Simultaneous configuration of multiple devices

Graphical user interface with network layout

Auto-topology discovery

Event log

Event handling

Client/server structure

Browser interface

ActiveX control for SCADA integration

SNMP/OPC gateway.

Legend

The symbols used in this manual have the following meanings:

Listing

Work step

Subheading

Other manuals for OCTOPUS 8M Series

This manual suits for next models

Table of contents

Other Hirschmann Switch manuals

Hirschmann

Hirschmann RH1-TP Manual

Hirschmann

Hirschmann MSP30 User manual

Hirschmann

Hirschmann RSPE30 User manual

Hirschmann

Hirschmann OCTOPUS 8TX-EEC User manual

Hirschmann

Hirschmann OCTOPUS 8M Series User manual

Hirschmann

Hirschmann Power MICE User manual

Hirschmann

Hirschmann GECKO 4TX User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann GRS103 Series User manual

Hirschmann

Hirschmann GECKO User manual

Hirschmann

Hirschmann GREYHOUND GRS1020 User manual

Hirschmann

Hirschmann CS30 User manual

Hirschmann

Hirschmann LION-GIGA-1SX User manual

Hirschmann

Hirschmann MACH4000 Series User manual

Hirschmann

Hirschmann BATOne User manual

Hirschmann

Hirschmann PAT TRS 05 / PATB3 User guide

Hirschmann

Hirschmann RSPL 20 User manual

Hirschmann

Hirschmann OS20-001000T5T5TAFUHB User manual

Hirschmann

Hirschmann RS1 Series Manual

Hirschmann

Hirschmann MACH1000 Series User manual

Hirschmann

Hirschmann SPIDER 5TX Manual

Hirschmann

Hirschmann RS20 series User manual

Hirschmann

Hirschmann MAR1042 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual