HIK VISION Platinum Series User manual

IR Network Speed Dome

Quick Guide

IR High-Definition Network Speed Dome·Quick Guide

Thank you for purchasing our product. If there are any questions, or requests, please do

not hesitate to contact the dealer.

This manual applies to IR High-Definition Network speed dome.

This manual may contain several technical incorrect places or printing errors, and the

content is subject to change without notice. The updates will be added to the new

version of this manual. We will readily improve or update the products or procedures

described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of

the security or signaling aspects of this product. UL has only tested for fire, shock or

casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification

does not cover the performance or reliability of the security or signaling aspects of this

product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS

WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR

SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

IR High-Definition Network Speed Dome·Quick Guide

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits

for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the Low Voltage Directive 2006/95/EC, the EMC

Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot

be disposed of as unsorted municipal waste in the European Union. See the

product documentation for specific battery information. The battery is

marked with this symbol, which may include lettering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to

your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

IR High-Definition Network Speed Dome·Quick Guide

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to

avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local

region.

Please use the power adapter, which is provided by normal company. The standard of

the power adapter is 24VAC10% or 12VDC10% (depending on models). The power

consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause

over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire, install or

dismantle the speed dome.

When the product is installed on wall or ceiling, the device shall be firmly fixed.

If smoke, odors or noise rise from the device, turn off the power at once and unplug

the power cable, and then please contact the service center.

If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the speed dome yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

Cautions

Do not drop the dome or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or

places subject to shock (ignorance can cause equipment damage).

Do not place the dome in extremely hot, cold, dusty or damp locations, otherwise fire

or electrical shock will occur. The operating temperature should be -30°C ~ 65°C .

The dome cover for indoor use shall be kept from rain and moisture.

Warnings Follow these safeguards

to prevent serious injury or death.

Cautions Follow these precautions

to prevent potential injury or

material damage.

IR High-Definition Network Speed Dome·Quick Guide

Exposing the equipment to direct sun light, low ventilation or heat source such as

heater or radiator is forbidden (ignorance can cause fire danger).

Do not aim the speed dome at the sun or extra bright places. A blooming or smear

may occur otherwise (which is not a malfunction however), and affecting the

endurance of sensor at the same time.

Please use the provided glove when open up the dome cover, avoid direct contact

with the dome cover, because the acidic sweat of the fingers may erode the surface

coating of the dome cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the dome

cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any failure

occurred, you need to return the speed dome to the factory with the original wrapper.

Transportation without the original wrapper may result in damage on the speed dome

and lead to additional costs.

Do not stare at infrared LED closely to avoid hurting your eyes when the infrared

lights are on.

IR High-Definition Network Speed Dome·Quick Guide

Table of Contents

1 Overview ..................................................................................................................6

2 Installation................................................................................................................7

3 Setting the Network Dome over the LAN.................................................................10

4 Accessing via Web Browser .....................................................................................13

IR High-Definition Network Speed Dome·Quick Guide

1Overview

Please make sure the power of the speed dome has been disconnected before

connecting the cables.

The cable interfaces of network speed dome are shown in following figure (left). The

cables are distinguished by different colors. The labels attached on the cables are for

identification.

Figure 1-1 Overview

Table 1-1 Overview

No.

Description

Network Cable

Audio Cable

Alarm Out

Alarm In

RS-485

Video Cable

Power Cable

SD Card Slot

Note: No. 8 is the SD card slot of the network speed dome. Remove the slot cover and

insert the SD card into the SD card slot, then install the slot cover back.

RED AC24V

YELLOW/GREEN

BLACK AC24V

YELLOW R485 -

ORANGE R485 +

VIEOD

SD CARD 8

IR High-Definition Network Speed Dome·Quick Guide

2Installation

Before you start:

Check the package contents and make sure that the device in the package is in good

condition and all the assembly parts are included.

Please make sure the wall is strong enough to withstand more than 8 times the

weight of the dome and the mount.

For cement wall, you need to use the expansion screw to fix the mount.

The long-arm wall mount is taken as the example for following mounting steps.

Note: Do not drag the speed dome with its waterproof cables as shown in Figure 1-1,

otherwise the waterproof performance is affected.

Figure 1-1 Do Not Drag the Cables

Steps:

1. Remove the protective sticker from the dome drive.

Figure 2-1 Protective Sticker

2. Drill 4 screw holes in the wall according to the holes of the mount.

3. Secure the wall mount to the wall with the M8 expansion screws.

Protective

Sticker

IR High-Definition Network Speed Dome·Quick Guide

Figure 2-2 Secure the Mount

Notes:

The mount in Figure 2-2 is the recommended mount for this series of speed dome,

and a pendent adapter is required if any other mount is selected. See Figure 2-3.

The dimension of pendant adapter is G11

Figure 2-3 Pendent Adapter

4. Install the speed dome to the mount.

1). Hang the safety rope to the speed dome and then hook to the mount as shown in

Figure 2-4.

2). Route the cables of the speed dome through the wall mount.

3). Connect the corresponding video/audio/power/RS-485/alarm cables.

4). Loosen the two lock screws on the wall mount.

5). Install the speed dome to the mount, and secure the speed dome by rotating the

speed dome clockwise.

6). Secure the two lock screws with the Allen wrench.

Pendent

adapter

IR High-Definition Network Speed Dome·Quick Guide

Figure 2-4 Secure the Speed Dome

Safety Rope

Lock

Screw

This manual suits for next models

Table of contents

Other HIK VISION Security Camera manuals

HIK VISION

HIK VISION DS-2CD6D54G1-ZS/RC User manual

HIK VISION

HIK VISION HiWatch HWI-B140H-M User manual

HIK VISION

HIK VISION HiLook IPC-B149H User manual

HIK VISION

HIK VISION TURBO HD DS-2CE56H0T-IT1F User manual

HIK VISION

HIK VISION DS-2XS6A25G0-I/CH20S40 User manual

HIK VISION

HIK VISION DS-2AE7230TI-A User manual

HIK VISION

HIK VISION DS-2AE7225TI-A User manual

HIK VISION

HIK VISION Turbo HD D0T Series User manual

HIK VISION

HIK VISION NETWORK CAMERA User manual

HIK VISION

HIK VISION DS-2SE7C144IW-AE User manual

HIK VISION

HIK VISION PTZ-N4225I-DE User manual

HIK VISION

HIK VISION DS-TCL400-E User manual

HIK VISION

HIK VISION DS-2CD6D54G1-IZS User manual

HIK VISION

HIK VISION DS-2XM6222G1-IM/ND User manual

HIK VISION

HIK VISION DS-2CE56H0T-(A)VPIT3ZF User manual

HIK VISION

HIK VISION DS-2CV2G21G0-IDW User manual

HIK VISION

HIK VISION UD04310B User manual

HIK VISION

HIK VISION DS-2CV2G46G0-IDW User manual

HIK VISION

HIK VISION DS-2CE10HFT-F28 User manual

HIK VISION

HIK VISION DS-2SE4C425MWG-E/26(F0) User manual

HIK VISION

HIK VISION DS-2CD2432F-IW User manual

HIK VISION

HIK VISION HWP-N2404IH-DE3 User manual

HIK VISION

HIK VISION E-series User manual

HIK VISION

HIK VISION 4 Inch High Speed Dome User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications