HIK VISION PanoVu Mini User manual

Network PTZ Camera·Quick Start Guide

PanoVu Mini

Network PTZ Camera

Quick Start Guide

Network PTZ Camera·Quick Start Guide

Quick Start Guide

Any and all information, including, among others, wordings, pictures,

graphs are the properties of Hangzhou Hikvision Digital Technology

Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).

This user manual (hereinafter referred to be “the Manual”) cannot

be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of

Hikvision. Unless otherwise stipulated, Hikvision does not make any

warranties, guarantees or representations, express or implied,

regarding to the Manual.

About this Manual

This Manual is applicable to PanoVu Mini Network PTZ Camera.

The Manual includes instructions for using and managing the

product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The

information contained in the Manual is subject to change, without

notice, due to firmware updates or other reasons. Please find the

latest version in the company website

(http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions. Other trademarks and

logos mentioned below are the properties of their respective

owners.

Network PTZ Camera·Quick Start Guide

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,

AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION,

ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO

YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF

BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR

DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS

PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS

PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE

APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT

THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

Network PTZ Camera·Quick Start Guide

iii

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

0504111080130

Network PTZ Camera·Quick Start Guide

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive

Network PTZ Camera·Quick Start Guide

2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points. For more information,

please see: www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your

supplier or to a designated collection point. For more information,

please see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards

requirements.

Waring:

This is a class A product. In a domestic environment this product may

cause radio inter-ference in which case the user may be required to

take adequate measures.

Network PTZ Camera·Quick Start Guide

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may occur if any of the warnings

are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings

Input voltage should meet both the SELV (Safety Extra Low Voltage)

and the Limited Power Source with 12 VDC according to the

IEC60950-1 standard. Refer to technical specifications for detailed

information.

Do not connect several devices to one power adapter as adapter

overload may cause over-heating or a fire hazard.

Make sure that the plug is firmly connected to the power socket.

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Network PTZ Camera·Quick Start Guide

vii

Make sure that the power has been disconnected before you wire,

install or dismantle the PTZ camera.

When the camera is mounted on wall or ceiling, the device shall

be firmly fixed.

If smoke, odor or noise rise from the device, turn off the power at

once and unplug the power cable, and then contact the service

center.

If the camera does not work properly, contact your dealer or the

nearest service center. Never attempt to disassemble the camera

yourself. (We shall not assume any responsibility for problems

caused by unauthorized repair or maintenance.)

Cautions

If the camera fails to synchronize local time with that of the

network, you need to set up camera time manually. Visit the

camera (via web browser or client software) and enter system

settings interface for time settings.

Make sure the power supply voltage is correct before using the

camera.

Do not drop the camera or subject it to physical shock, and do not

expose it to high electromagnetism radiation. Avoid installation on

vibrations surface or places subject to shock (ignorance can cause

device damage).

Do not touch senor modules with fingers. If cleaning is necessary,

use clean cloth with a bit of ethanol and wipe it gently. If the

Network PTZ Camera·Quick Start Guide

viii

camera will not be used for an extended period, replace the lens

cap to protect the sensor from dirt.

Do not aim the camera at the sun or extra bright places. Blooming

or smearing may occur otherwise (which is not a malfunction),

and affect the endurance of sensor at the same time.

The sensor may be burned out by a laser beam, so when any laser

equipment is in using, make sure that the surface of sensor will

not be exposed to the laser beam.

Do not place the camera in extremely hot, cold, dusty or damp

locations, and do not expose it to high electromagnetic radiation.

To avoid heat accumulation, good ventilation is required for

operating environment.

Keep the camera away from liquid while in use.

While in delivery, the camera shall be packed in its original packing,

or packing of the same texture.

Improper use or replacement of the battery may result in hazard

of explosion. Replace with the same or equivalent type only.

Dispose of used batteries according to the instructions provided

by the battery manufacturer.

This product is not for household use.

Network PTZ Camera·Quick Start Guide

Table of Contents

1 Overview......................................................................................... 1

1.1 Introduction ............................................................................. 1

1.1.1 Overview of Type I Camera................................................ 1

1.1.2 Overview of Type II Camera ............................................... 2

1.1.3 Overview of Type III Camera .............................................. 3

1.1.4 Overview of Type IV Camera.............................................. 4

1.1.5 Overview of Type V Camera............................................... 5

2 Installation...................................................................................... 6

2.1 Installing Type I Camera............................................................ 6

2.1.1 Installing the Memory Card ............................................... 6

2.1.2 Ceiling Mounting ............................................................... 7

2.1.3 Wall Mounting................................................................. 10

2.1.4 Pendant Mounting .......................................................... 12

2.2 Installing Type II Camera......................................................... 14

2.3 Installing Type III Camera........................................................ 14

2.4 Installing Type IV Camera........................................................ 14

2.4.1 Installing the Memory Card ............................................. 14

2.4.2 Wall Mounting................................................................. 16

2.4.3 Corner Mounting............................................................. 18

2.4.4 Pendant Mounting .......................................................... 19

2.4.5 Adjust the Surveillance Angle .......................................... 19

2.5 Installing Type V Camera......................................................... 21

3 Setting the PTZ Camera over the LAN........................................... 22

3.1 Wiring .................................................................................... 22

3.2 Activating the Camera ............................................................ 23

3.2.1 Activation via Web Browser............................................. 23

3.2.2 Activation via SADP Software .......................................... 25

Table of contents

Other HIK VISION Security Camera manuals

HIK VISION

HIK VISION iDS-2XM6810F-I/C Quick guide

HIK VISION

HIK VISION DS-2XC6284G0-L User manual

HIK VISION

HIK VISION DS-2CD2347G2-LSU Assembly instructions

HIK VISION

HIK VISION DS-2CD2763G0-IZS User manual

HIK VISION

HIK VISION DS-HD2 User manual

HIK VISION

HIK VISION ECI-B14F2 User manual

HIK VISION

HIK VISION DS-2TD2608-2/QA/FP User manual

HIK VISION

HIK VISION DS-2CE16D8T-AIT3ZE User manual

HIK VISION

HIK VISION DS-2SE7C144IW-AE User manual

HIK VISION

HIK VISION DS-2XE Series User manual

HIK VISION

HIK VISION HWP-T4225I-D User manual

HIK VISION

HIK VISION DS-2ZMN3607 User manual

HIK VISION

HIK VISION DS-TCG227-A Series User manual

HIK VISION

HIK VISION DS-2TD2636B-15/P User manual

HIK VISION

HIK VISION DS-2CD1621FWD-IZ User manual

HIK VISION

HIK VISION TURBO HD DS-2CE56D1T-IRP User manual

HIK VISION

HIK VISION DS-2CD2T27G3E-L User manual

HIK VISION

HIK VISION TURBO HD DS-2CE56D5T User manual

HIK VISION

HIK VISION DS-2CD7A85G0-IZHS User manual

HIK VISION

HIK VISION DS-2CV2B41G0-ID/4G/C04S05 User manual

HIK VISION

HIK VISION DS-2CD6412FWD-20 User guide

HIK VISION

HIK VISION DS-2CV2046G0-IDW User manual

HIK VISION

HIK VISION DS-2TD2466-9X User manual

HIK VISION

HIK VISION DS-2CD883F-E series User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications