HIK VISION DS-2CE71D0T-PIRL User manual

UM DS-2CE71D0T-PIRL 072718NA

TurboHD

Turret Camera

DS-2CE71D0T-PIRL

User Manual

Thank you for purcha ing our product. If there are any

que tion , or reque t , plea e contact the dealer.

Thi manual may contain technical incorrect place or

printing error , and the content i ubject to change

without notice. The update will be added to the new

ver ion of thi manual. We will readily improve or update

the product or procedure de cribed in the manual.

Regulatory In ormation FCC In ormation

Plea e take attention that change or modification not

expre ly approved by the party re pon ible for

compliance could void the u er’ authority to operate the

equipment.

FCC Compliance: Thi equipment ha been te ted and

found to comply with the limit for a Cla A digital device,

pur uant to part 15 of the FCC Rule . The e limit are

de igned to provide rea onable protection again t harmful

interference when the equipment i operated in a

commercial environment. Thi equipment generate , u e ,

and can radiate radio frequency energy and, if not

in talled and u ed in accordance with the in truction

manual, may cau e harmful interference to radio

communication . Operation of thi equipment in a

re idential area i likely to cau e harmful interference in

which ca e the u er will be required to correct the

interference at hi own expen e.

FCC Conditions

Thi device complie with part 15 of the FCC Rule .

Operation i ubject to the following two condition :

1. Thi device may not cau e harmful interference.

2. Thi device mu t accept any interference received,

including interference that may cau e unde ired

operation.

EU Con ormity Statement

Thi product and, if applicable, the upplied

acce orie too are marked with “CE” and comply

therefore with the applicable harmonized

European tandard li ted under the Low Voltage Directive

2014/35/EU, the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU.

2012/19/EU (WEEE Directive): Product marked with thi

ymbol cannot be di po ed of a un orted

municipal wa te in the European Union. For proper

recycling, return thi product to your local upplier

upon the purcha e of equivalent new equipment,

All manuals and user guides at all-guides.com

all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

or di po e of it at de ignated collection point . For more

information ee: www.recyclethi .info.

2006/66/EC (Battery Directive): Thi product contain a

battery that cannot be di po ed of a un orted

municipal wa te in the European Union. See the

product documentation for pecific battery

information. The battery i marked with thi

ymbol, which may include lettering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling,

return the battery to your upplier or to a de ignated

collection point. For more information ee:

www.recyclethi .info.

Industry Canada ICES-003 Compliance

Thi device meet the CAN ICES-3 (A)/NMB-3(A) tandard

requirement .

Warning

Thi i a cla A product. In a dome tic environment thi

product may cau e radio interference in which ca e the

u er may be required to take adequate mea ure .

Sa ety Instruction

The e in truction are intended to en ure that u er can

u e the product correctly to avoid danger or property lo .

The precaution mea ure i divided into “Warning ” and

“Caution .”

Warnings: Seriou injury or death may occur if any of the

warning are neglected.

Cautions: Injury or equipment damage may occur if any of

the caution are neglected.

Warnings

the e

afeguard to prevent

eriou injury or death.

Cautions

Follow the e

precaution to prevent

potential injury or material

damage.

Warnings

•

In the u e of the device, you mu t be in trict compliance

with the electrical afety regulation of the nation and

region.



•

Input voltage hould meet both the SELV (Safety Extra

Low Voltage) and the Limited Power Source with 12 VDC

according to the IEC60950-1 tandard. Refer to technical

pecification for detailed information.



•

Do not connect multiple device to one power adapter to

avoid over-heating or a fire hazard cau ed by overload.



•

Make ure that the plug i firmly connected to the power

ocket.



•

Make ure that the device i firmly fixed if wall mounting

or ceiling mounting i adopted.



•

If moke, odor or noi e ri e from the device, turn off the

power at once and unplug the power cord, and then

contact the ervice center.



•

Never attempt to di a emble the camera by

unprofe ional per onal.



Cautions

•

Do not drop the camera or ubject it to phy ical hock.



•

Do not touch enor module with finger .

•

Do not place the camera in extremely hot, cold (the

All manuals and user guides at all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

operating temperature hall be -40° to 60° C), du ty or

damp location , and do not expo e it to high

electromagnetic radiation.



•

If cleaning i nece ary, u e a clean cloth with a bit of

ethanol, and wipe it gently.

•

Do not aim the camera at the un or extra bright place .

•

The en or may be burned out by a la er beam, o if any

la er equipment i in u e, make ure that the urface of

the en or i not expo ed to the la er beam.

•

Do not expo e the device to high electromagnetic

radiation or extremely hot, cold, du ty, or damp

environment.

•

To avoid heat accumulation, good ventilation i required

for the operating environment.

•

Keep the camera away from liquid while in u e for non-

waterproof device.



•

While in delivery, the camera hall be packed in it

original packing or packing of the ame texture.



Mark Description

Mark

Description

C Voltage

1Introduction

1.1 Product Features

The main feature are a follow :

•

High performance CMOS en or



•

IR cut filter with auto witch



•

OSD menu with configurable parameter



•

Auto white balance



•

Internal ynchronization



•

SMART IR mode



•

Vi ible alarm



•

PIR detection



•

3-axi adju tment



1.2 Overview

Figure 1, Camera Overview

2Installation

Be ore you start:

•

Make ure that the device in the package i in good

condition and all the a embly part are included.



•

Make ure that all the related equipment i powered off

during the in tallation.



•

Check the pecification of the product for the in tallation

environment.



•

Check that the power upply matche your required

All manuals and user guides at all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

output to avoid damage.



•

Make ure the wall i trong enough to with tand three

time the weight of the camera, and the mount.



•

If the wall i concrete, in ert expan ion crew before

in talling the camera. If the wall i wood, u e elf-tapping

crew to ecure the camera.



•

If the product doe not function properly, contact your

dealer or the neare t ervice center. Do NOT di a emble

the camera for repair or maintenance your elf.



2.1 Ceiling/Wall Mounting without Junction Box

1. Di a emble the camera.

1). Rotate the camera to align the notch to one of the

mark .

2). Pry the mounting ba e with a flat object (e.g., a

coin) to remove it from the camera body.

2. Pa te the drill template ( upplied) to where you want to

in tall the camera.

3. Drill the crew hole and the cable hole (optional) in the

ceiling/wall according to the drill template.

Figure 2, Drill Template

Note:

Drill the cable hole if u ing the ceiling outlet to route the

cable.

4. Attach the mounting ba e to the ceiling/wall, and

ecure them with upplied crew .

Figure 3, Attach Mounting Ba e to Ceiling

Note:

The upplied crew package contain elf-tapping crew

and expan ion bolt .



For concrete wall/ceiling, expan ion bolt are required to

fix the camera. For wood wall/ceiling, elf-tapping crew

are required.



5. Route the cable through the cable hole or ide

opening.

6. Align the camera with the mounting ba e, and ecure

the camera on the mounting ba e.

All manuals and user guides at all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

Figure 4, Secure Camera to Mounting Ba e

7. Connect the corre ponding cable uch a power cord

and video cable.

8. Power on the camera to check if the image on the

monitor i at an optimum angle. If not, adju t the

camera according to the figure below to get an

optimum angle.

Figure 5, 3-Axi Adju tment

1). Hold the camera body and rotate the enclo ure to

adju t the pan po ition [0° to 360°].

2). Move the camera body up and down to adju t the

tilt po ition [0° to 75°].

3). Rotate the camera body to adju t the rotation

po ition [0° to 360°].

2.2 Mounting with Inclined Ceiling Mount

Be ore you start:

You need to purcha e an inclined ceiling mount

eparately.

1. Pa te the drill template ( upplied) where you want to

in tall the camera.

2. Drill crew hole and the cable hole on the ceiling/wall

according to the upplied drill template.

Figure 6, Drill Template

3. Di a emble the inclined ceiling mount with a

crewdriver.

4. In tall the turret camera’ mounting ba e on the

inclined ceiling mount’ cover with three PM4 crew .

All manuals and user guides at all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

Figure 7, In tall Turret Camera’ Mounting Ba e

5. In tall the inclined ceiling mount’ body on the

ceiling/wall with four PA4 × 25 crew .

Figure 8, Fix the Inclined Ceiling Mount’ Body

6. Combine the inclined ceiling mount’ cover with it

body with upplied crew .

7. Repeat tep 5 to 8 of Ceiling/Wall Mounting without

Junction Box to complete the in tallation.

Figure 9, Fix Camera to the Inclined Ceiling Mount

2.3 Ceiling/Wall Mounting with Junction Box

Be ore you start:

You need to purcha e a junction box eparately.

1. Pa te the drill template on the ceiling/wall.

2. Drill crew hole and the cable hole (optional) in the

ceiling/wall according to the hole of the drill template.

Figure 10, Junction Box Drill Template

All manuals and user guides at all-guides.com

all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

Note:

Drill a cable hole if u ing the ceiling outlet to route the

cable.

3. Take apart the junction box, and align the crew hole

of the turret camera’ mounting ba e with tho e on the

junction box’ cover.

Figure 11, In tall Turret Camera Mounting Ba e

4. Fix the mounting ba e on junction box’ cover with

upplied crew .

Figure 12, In tall Junction Box on Ceiling/Wall

5. Secure the junction box’ body with upplied crew on

the ceiling/wall.

6. Combine the junction box’ cover with the junction

box’ body.

Figure 13, Fix the Camera to the Junction Box

7. Repeat tep 5 to 8 of Ceiling/Wall Mounting without

Junction Box to in tall the camera to the junction box.

2.4 Wall Mounting

Be ore you start:

You need to purcha e a wall mount eparately.

1. Drill four crew hole in the wall according to the hole

on the mount.

2. In tall the mount to the wall by aligning the four crew

hole of the bracket with expan ion crew on the wall.

3. Secure the mount with four hex nut and wa her .

All manuals and user guides at all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

Figure 14, In tall the Bracket

Figure 2-14 In tall Mounting Ba e to Bracket

4. In tall the mounting ba e of the turret camera to the

wall mount, and ecure them with upplied crew .

5. Route the cable through the mount.

6. Repeat tep 6 to 8 of Ceiling/Wall Mounting without

Junction Box to complete the in tallation.

3Menu Description

Purpose:

Call the menu by clicking the button on the PTZ Control

interface or call pre et no.95.

1. Connect the camera to the TVI DVR and the monitor.

Figure 15, Connection

2. Power on the analog camera, TVI DVR, and the monitor

to view the image on the monitor.

3. Click PTZ Control to enter the PTZ Control interface.

4. Call the camera menu by clicking the button or call

pre et no. 95.

All manuals and user guides at all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

Figure 16, Main Menu Overview

5. Click the direction arrow to control the camera.

1). Click up/down direction button to elect the item.

2). Click Iris + to confirm the election.

3). Click le t/right direction button to adju t the value

of the elected item.

3.1 VIDEO FORMAT

You can elect the video format a 2 MP @ 25 fp or 2 MP

@ 30 fp .

3.2 LANGUAGE

Support Engli h and Chine e.

All manuals and user guides at all-guides.com

UM DS-2CE71D0T-PIRL 072718NA

3.3 EXPOSURE

EXPOSURE MODE

You can et the EXPOSURE MODE a GLOBAL, BLC, or

DWDR.

•

GLOBAL





Normal expo ure mode, which adju t lighting

di tribution, variation , and non- tandard proce ing.

•

BLC (Backlight Compensation)





Compen ate light to the object in the front to make it

clear, but may cau e overexpo ure of the background

where the light i trong.

•

DWDR (Digital Wide Dynamic Range)





Help provide clear image even under backlight

circum tance . WDR balance the brightne level of

the whole image and provide clear image with detail .

AGC (Auto Gain Control)

Optimize image clarity in poor light condition . The level

can be et a HIGH, MEDIUM, or LOW. Select OFF to

di able the AGC function.

Note:

The noi e will be amplified when the AGC i on.

3.4 DAY/NIGHT

COLOR, B&W (Black White), and AUTO are electable for

DAY/NIGHT witche .

Note:

Under LIGHTING mode, the image i in color all the time,

and there i no DAY/NIGHT etting in the menu.

•

COLOR

The image i colored in day mode all the time.

•

B/W

The image i black and white all the time, and it i be t

to turn the IR LIGHT on in poor light condition .

•

AUTO

You can turn on/off the IR LIGHT and et the SMART IR

value in thi menu.

Figure 17, DAY/NIGHT

˗IR LIGHT





You can turn on/off the infrared to meet the

requirement of different circum tance .

˗SMART IR





The Smart IR function i u ed to adju t the light to it

mo t uitable inten ity, and prevent the image from

over expo ure. The SMART IR value can be adju ted

from 0 to 3. The greater the value i , the more

obviou effect are.

All manuals and user guides at all-guides.com

Other manuals for DS-2CE71D0T-PIRL

Other HIK VISION Security Camera manuals

HIK VISION

HIK VISION ColorVu DS-2CE DFT-F Series User manual

HIK VISION

HIK VISION E-series User manual

HIK VISION

HIK VISION HWT-T120-P User manual

HIK VISION

HIK VISION DS-2SE4C425MWG-E/26(F0) User manual

HIK VISION

HIK VISION DS-2CD7A85G0-IZHS User manual

HIK VISION

HIK VISION DS-2TD2137T-7/P User manual

HIK VISION

HIK VISION DS-2CE59U7T-VPIT3ZF User manual

HIK VISION

HIK VISION iDS-TCV300-A6I User manual

HIK VISION

HIK VISION DS-2TD2167-7/PI User manual

HIK VISION

HIK VISION DS-2TD4238-7/S2 User manual

HIK VISION

HIK VISION DS-2TD2636B-15/P User manual

HIK VISION

HIK VISION DS-2XC6745G0-IZHS User manual

HIK VISION

HIK VISION UD.6L0201B1015A01 User manual

HIK VISION

HIK VISION TURBO HD Series User manual

HIK VISION

HIK VISION HWT-B123-M User manual

HIK VISION

HIK VISION DS-2CD2126G2-ISU User manual

HIK VISION

HIK VISION PIR Series User manual

HIK VISION

HIK VISION DS-2CE16C2T-IRP User manual

HIK VISION

HIK VISION iDS-2CD9136-AIS User manual

HIK VISION

HIK VISION TURBO HD D8T POC Series User manual

HIK VISION

HIK VISION TURBO HD D8T PIR Series User manual

HIK VISION

HIK VISION DS-2CE16C0T-IT1 User manual

HIK VISION

HIK VISION DS-2CD3B46G2T-IZHS User manual

HIK VISION

HIK VISION UD06695B User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications