HIK VISION DS-2CD63C5G0-IVS User manual

Dome Network Camera

Quick Start Guide

Any and all information, including, among others, wordings, pictures,

graphs are the properties of Hangzhou Hikvision Digital Technology

Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This

user manual (hereinafter referred to be “the Manual”) cannot be repro-

duced, changed, translated, or distributed, partially or wholly, by any

means, without the prior written permission of Hikvision. Unless other-

wise stipulated, Hikvision does not make any warranties, guarantees

or representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Bullet Network Camera.

The Manual includes instructions for using and managing the product.

Pictures, charts, images and all other information hereinafter are for

description and explanation only. The information contained in the

Manual is subject to change, without notice, due to rmware updates

or other reasons. Please nd the latest version in the company website

(http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are

the properties of Hikvision in various jurisdictions. Other trademarks

and logos mentioned below are the properties of their respective own-

ers.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE

AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND

ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANT-

ABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR

PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO

EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOY-

EES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSE-

QUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTA-

TION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN

IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE

USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.

HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR AB-

NORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEV-

ER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF

REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK

ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING

THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CON-

FORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE

IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE

PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND

THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modication not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC compliance: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to ra-

dio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interfer-

ence that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories

too are marked with "CE" and comply therefore withthe

applicable harmonized European standards listed under

the the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted municipal

waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated

collection points. For more information see: www.

recyclethis.info

2006/66/EC and its amendment 2013/56/EU (battery

directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European

Union. See the product documentation for specic battery

information. The battery is marked with this symbol, which

may include lettering to indicate cadmium (Cd), lead (Pb),

or mercury (Hg). For proper recycling, return the battery to

your supplier or to a designated collection point. For more

information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards require-

ments.

Safety Instruction

These instructions are intended to ensure that the user can use the

product correctly to avoid danger or property loss.

Laws and Regulations

The device should be used in compliance with local laws, electrical

safety regulations, and re prevention regulations.

Transportation

Keep the device in original or similar packaging while transporting it.

Power Supply

The input voltage should conform to IEC60950-1 standard: SELV

(Safety Extra Low Voltage) and the Limited Power Source. Refer to

the appropriate documentation for detailed information.

DO NOT connect multiple devices to one power adapter, to avoid

over-heating or re hazards caused by overload.

Make sure the plug is properly connected to the power socket.

System Security

The installer and user are responsible for password and security

conguration and its settings.

Battery

Improper use or replacement of the battery may result in explosion

hazard. Replace with the same or equivalent type only. Dispose of

used batteries in conformance with the local codes.

Maintenance

If the product does not work properly, please contact your dealer or

the nearest service center. We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.

A few device components (e.g., electrolytic capacitor) require regular

replacement. The average lifespan varies, so periodic checking is

recommended. Contact your dealer for details.

Cleaning

Please use a soft and dry cloth when clean inside and outside

surfaces of the product cover. Do not use alkaline detergents.

Using Environment

When any laser equipment is in use, make sure that the device lens is

not exposed to the laser beam, or it may burn out.

Do not expose the device to high electromagnetic radiation or dusty

environments.

For indoor-only device, place it in a dry and well-ventilated

environment.

Do not aim the lens at the sun or any other bright light.

Make sure the running environment meets the requirement of the

device. The operating temperature shall be -30 °C to 60 °C (-22

°F to 140 °F), and the operating humidity shall be 90% or less (no

condensing).

Do not place the camera in extremely hot, cold, dusty or damp

locations, and do not expose it to high electromagnetic radiation.

Emergency

If smoke, odor, or noise arises from the device, immediately turn off

the power, unplug the power cable, and contact the service center.

Time Synchronization

Set up camera time manually for the rst time access if the local time

is not synchronized with that of the network. Visit the camera via Web

browse/client software and go to time settings interface.

Installation

Make sure the device is firmly secured to any wall or ceiling

mountings.

Be sure that there is enough space to install the camera and

accessories.

Make sure that the device in the package is in good condition and all

the assembly parts are included.

Make sure that the wall is strong enough to withstand at least 4 times

the weight of the camera and the mount.

The standard power supply is 12 VDC, or PoE (802.3at), please make

sure your power supply matches with your camera.

Make sure that the power has been disconnected before you wire,

install, or disassemble the device.

Make sure that no reective surface is too close to the camera lens.

The IR light from the camera may reect back into the lens causing

reection.

Symbols and Marks

Notice

Warning

Forbidden

Correct

Incorrect

Turn to page A and continue.

i. Not necessarily included accessory.

ii. Variable accessory amount.

iii. Skip this step if not required.

MicroSD card

Grounding

Disposal

Purchase separately

HIKVISION

1x 1x

1x 1x 1x

2x 1x 1x

T20

HIKVISIONHIKVISION

1.2*

microSD

1.1

HIKVISIONHIKVISION

1.2*

microSD

1.1

Other manuals for DS-2CD63C5G0-IVS

This manual suits for next models

Table of contents

Other HIK VISION Security Camera manuals

HIK VISION

HIK VISION DS-2TD2136-7 User manual

HIK VISION

HIK VISION TURBO HD D8T POC Series User manual

HIK VISION

HIK VISION DS-2CD8153F-E User manual

HIK VISION

HIK VISION DS-2CD883F-E series User manual

HIK VISION

HIK VISION DS-2XM6222FWD-I User manual

HIK VISION

HIK VISION ECI-T22Fx User manual

HIK VISION

HIK VISION DS-2CD1023G0E-IF User manual

HIK VISION

HIK VISION DS-2CD7133-E User manual

HIK VISION

HIK VISION AE-VC136T User manual

HIK VISION

HIK VISION DS-2CD2942F-I User manual

HIK VISION

HIK VISION DS-2CC502 / 572P(N)-M User manual

HIK VISION

HIK VISION iDS-2CD9396-BIS User manual

HIK VISION

HIK VISION DS-2DF1-713B User manual

HIK VISION

HIK VISION DS-2CE16D8T-IT1 User manual

HIK VISION

HIK VISION ColorVu DS-2CE DFT-F Series User manual

HIK VISION

HIK VISION DS-2CC11A1P User manual

HIK VISION

HIK VISION DS-2SE7C432MW-AEB User manual

HIK VISION

HIK VISION TURBO HD DS-2CE56D5T User manual

HIK VISION

HIK VISION DS-2CE16D0T-EXLF User manual

HIK VISION

HIK VISION HWT-T110-P User manual

HIK VISION

HIK VISION TurboHD User manual

HIK VISION

HIK VISION DS-2TD2166 User manual

HIK VISION

HIK VISION DS-2CV2G21G0-IDW User manual

HIK VISION

HIK VISION Network Speed Dome Camera User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications