Hawking H-BT10U User manual
H-BT10U
BluetoothTM USB Wireless Adapter
Thank you for purchasing Hawking Technologies’ H-BT10U
USB Wireless BluetoothTM Adapter. The H-BT10U is specifically
designed to plug into an available Universal Serial Bus port connecting
to a desktop or laptop PC. It allows you to make short-range wireless
connections between Bluetooth devices such as cellular phones,
personal digital assistants (PDA’s), and desktop and notebook
computers.
The USB Wireless BluetoothTM Adapter transmits voice and
data through radio waves at fast BluetoothTM speeds up to 723 Kbps.
BluetoothTM transmissions ensure both protection from interference and
secure data transfers. Eliminate troublesome cables and automatically
share documents, browse the Internet, and synchronize calendars,
address books and more with the H-BT10U.
Note: The CD Software should be installed prior to the
hardware installation!
Once the installation CD is inserted into the computer’s CD-ROM
drive, the Auto-Run function will automatically guide you to start the
software installation. If the Auto-Run function is not available, please
open the installation CD to find the “setup.exe” file and double-click
the “setup” icon to continue.
1. If you wish to connect your H-BT10U to a USB port on your
desktop computer, use the included USB adapter cable for better
placement flexibility.
2. First, locate the USB host port of your
system. Align the USB connector (the thin
end) of the USB adapter towards the USB
host port; push evenly and steadily until the
H-BT10U is firmly seated in the USB
socket.
3. Plug your USB Wireless BluetoothTM Adapter into the thicker end
of the USB adapter cable.
4. As soon as the device is properly plugged to your computer,
Windows will automatically detect the device and prompt the
following message. Select “Install the software automatically
(Recommended)” and press Next to continue through the next two
screens.
5. Press Finish to complete the hardware installation. It’s that easy!
Once the software is installed, a Bluetooth icon will appear on the
bottom right corner of your taskbar. Rght click to set up the
configuration. (Please see the manual for advanced configuration
instructions).
Click on the configuration icon from the taskbar menu and select the
Hardware tab to verify if “USB Bluetooth device” is listed in the device
window. If it is listed, your H-BT10U Bluetooth USB Adapter is
installed properly.
Table of contents
Other Hawking Adapter manuals
Hawking
Hawking HAWNU1 User manual
Hawking
Hawking HWL2 User manual
Hawking
Hawking HWUN1 User manual
Hawking
Hawking Hi-Gain HWU54DM User manual
Hawking
Hawking HPOE1 User manual
Hawking
Hawking HWL2A User manual
Hawking
Hawking HWUG1 User manual
Hawking
Hawking HWUN4 User manual
Hawking
Hawking HWU9DD User manual
Hawking
Hawking Hi-Gain User manual
Hawking
Hawking HWL2A User manual
Hawking
Hawking Hi-Gain HWU54DM User manual
Hawking
Hawking HBTC2 User manual
Hawking
Hawking HGA11 User manual
Hawking
Hawking Hi-Gain HAWNU2 User manual
Hawking
Hawking UF100 User manual
Hawking
Hawking H-WU36D Owner's manual
Hawking
Hawking HWDN3 User manual
Hawking
Hawking HWC54D User manual
Hawking
Hawking HWDN2 User manual
