Harman JBL STADIUM 6 User manual

JBL STADIUM 6, STADIUM 8, AND

STADIUM 10 MARINE SPEAKER

JBL Stadium 6, Stadium 8, and Stadium 10 marine speaker - Owner’s Manual

Haut-parleur marine JBL Stadium 6, Stadium 8 et Stadium 10 - Mode D’emploi

Altavoz para entornos marinoss JBL Stadium 6, Stadium 8 y Stadium 10 - Manual de Propietario

THANK YOU FOR YOUR PURCHASE . . .

Your JBL product has been designed to provide you with the performance and ease of operation you would expect from

JBL.

ABOUT THE MANUAL

This manual describes general installation guidelines. However, please note that proper installation of marine audio

components requires qualiﬁed experience. If you do not have the knowledge and tools to successfully perform this

installation, we strongly recommend consulting an authorized JBL dealer about your installation options. Keep all

instructions and sales receipts for reference.

WHAT’S IN THE BOX

Stadium 6

DIMENSIONS

Stadium 6 Stadium 8

Stadium 10

Stadium 8

12X

2X 2X

12X

2X 2X

1X 1X

7-15/32” (189.4mm)

5-23/32” (144.8mm)

2-9/16” (65mm)

3-21/32” (92.5mm)

3-3/16” (80.5mm)

4-5/8”(117.2mm)

7"(177.4mm)

9-1/2”(241.0mm)

JBL STADIUM 6, STADIUM 8, AND

STADIUM 10 MARINE SPEAKER

SPEAKER SIGNAL WIRING

To send signal to the JBL marine speaker, connect the positive (+) and negative (-) speaker wires to the appropriate speaker

outputs of your source unit or ampliﬁer. Be sure to observe proper polarity.

SPEAKER LED WIRING

To provide power for the LEDs, plug the 24-gauge black (+), blue, green, and red LED wires from the speaker into the

included female connector, then run the wires from the female connector to your compatible 12-volt power source or light

controller (sold separately). If using a separate controller, be sure to connect each wire to the proper output.

If hardwiring the LEDs directly to your power source, you can choose the color of the LEDs by connecting the black wire to

the positive (+) terminal, and the appropriate R, G, and/or B single wire or combination of wires to the negative (-) terminal.

There are 7 possible colors, depending on the wiring conﬁguration you choose:

Stadium 10

11-5/8” (295.3mm)

9-9/16” (235.6mm)

4-7/8” (123mm)

6-9/16” (167mm)

R BG

Blue

Green

Red

Black

Wire connected to positive

(+12V) terminal

Wire connected to

negative (-) terminal

Color produced

Black

Red Red

Green Green

Blue Blue

Red + Green Yellow

Red + Blue Purple

Blue + Green Aquamarine

Red + Blue + Green White

APPLYING FOAM SEAL

To help seal your installation against water, and to provide an airtight acoustic seal, apply the self-adhesive foam seal to the

speaker frame.

MOUNTING THE SPEAKER

Use the included screws to mount the speaker to the location. Use the included speed clips if necessary to provide a secure

mount.

NOTE: Use caution when cutting and using screws with ﬁberglass to prevent scratches and cracks.

Stadium 6 and Stadium 8 Stadium 10

REMOVING THE TWEETER FOR SEPARATE MOUNTING (STADIUM 8 ONLY)

Use the included 2-pin tool to remove the tweeter from the woofer housing. Place the pins of the tool in the holes of the

tweeter grille and rotate 45 degrees clockwise to loosen and remove.

FLUSH-MOUNTING THE TWEETER

Place the tweeter in the mounting bracket and use the tool to secure by turning 45 degrees counter-clockwise.

To transmit audio signal to the tweeter, make sure the woofer and tweeter are connected with the included cable.

Place the tweeter in the mounting location, then turn each setscrew clockwise to tighten mounting brackets. Use caution so

as not to overtighten. Snap the included outer ring over the mounting bracket to hide the setscrews.

Specications Stadium 6 Stadium 8 Stadium 10

Continuous power

handling

100W 200W 300W

Peak power handling 300W 500W 900W

Frequency response 40Hz – 25kHz 30Hz – 22kHz 20Hz – 2kHz

Nominal impedance 3 Ohms* 3 Ohms* 2 or 4 Ohms (use

switch to select)

Sensitivity 92dB 92dB 89dB

External diameter 7-15/32” (189.4mm) 9-1/2” (241mm) 11-5/8” (295.3mm)

Mounting cutout diameter 5-23/32” (144.8mm) Woofer: 7” (177.4mm)

Tweeter bracket: 4-9/16”

(115.9mm)

9-9/16” (235.6mm)

Total depth 3-21/32” (92.5mm) 4-5/8” (117.2mm) 6-9/16” (167mm)

Mounting depth 2-9/16” (65mm) 3-3/16” (80.5mm) 4-7/8” (123mm)

*NOTE: Because of the woofer’s low impedance, do not wire two or more in parallel to an ampliﬁer; doing so can result in

overheating and damage to the ampliﬁer.

HARMAN International Industries,

Incorporated 8500 Balboa Boulevard,

Northridge, CA 91329 USA

www.jbl.com

JBL is a trademark of HARMAN International Industries, Incorporated,

registered in the United States and/or other countries. Features, speciﬁcations

and appearance are subject to change without notice.

JBL STADIUM 6, STADIUM 8, AND

STADIUM 10 MARINE SPEAKER

MERCI POUR VOTRE ACHAT. . .

Votre produit JBL a été conçu pour vous offrir les performances et la facilité d’utilisation que vous attendez de notre part.

PRÉSENTATION DU MANUEL

Ce manuel contient les directives d’installation générales. Cependant, veuillez noter que l’installation correcte de

composants audio marine requiert une expérience qualiﬁée. Si vous ne disposez pas des connaissances et des outils

permettant d’exécuter correctement cette installation, nous vous recommandons fortement de consulter un distributeur

agréé JBL pour connaître vos options d’installation. Conservez toutes les instructions et les factures à titre de référence.

CONTENU DE LA BOÎTE

Stadium 6

DIMENSIONS

Stadium 6 Stadium 8

Stadium 10

Stadium 8

12X

2X 2X

12X

2X 2X

1X 1X

7-15/32” (189.4mm)

5-23/32” (144.8mm)

2-9/16” (65mm)

3-21/32” (92.5mm)

3-3/16” (80.5mm)

4-5/8”(117.2mm)

7"(177.4mm)

9-1/2”(241.0mm)

CÂBLAGE DU SIGNAL DU HAUT-PARLEUR

Pour envoyer le signal au haut-parleur marine JBL, connectez les ﬁls de haut-parleur positif (+) et négatif (-) aux sorties de

haut-parleur appropriées de votre appareil ou ampliﬁcateur source. Veillez à respecter la polarité adéquate.

CÂBLAGE DES DEL DU HAUT-PARLEUR

Pour alimenter les DEL, branchez les ﬁls de DEL de 0,205 mm² (24-gauge) noir (+), bleu, vert et rouge du haut-parleur dans le

connecteur femelle inclus, puis faites passer les ﬁls du connecteur femelle à votre alimentation 12 volts ou contrôleur d’éclai-

rage compatible (vendu séparément). Si vous utilisez un contrôleur séparé, veillez à connecter chaque ﬁl à la bonne sortie.

Si vous câblez directement les DEL à votre alimentation, vous pouvez choisir la couleur des DEL en connectant le ﬁl noir à la

borne positive (+) et les ﬁls R, V et/ou B individuels appropriés ou une combinaison de ces ﬁls à la borne négative (-).

Il y a 7 couleurs possibles, selon la conﬁguration de câblage que vous choisissez :

Blue

Green

Red

Black

Stadium 10

11-5/8” (295.3mm)

9-9/16” (235.6mm)

4-7/8” (123mm)

6-9/16” (167mm)

R BG

Bleu

Rouge

Noir

Vert

Vers le haut-parleur

Vers l’alimentation

Fil connecté à la borne

positive (+12V)

Fil connecté à la borne

négative (-)

Couleur produite

Noir

Rouge Rouge

Vert Vert

Bleu Bleu

Rouge + vert Jaune

Rouge + bleu Mauve

Bleu + vert Bleu vert

Rouge + vert + bleu Blanc

APPLICATION DE LA MOUSSE D’ÉTANCHÉITÉ

Pour contribuer à l’étanchéité de votre installation contre l’eau et pour créer une étanchéité acoustique à l’air, appliquez le

joint de mousse auto-adhésif sur la structure du haut-parleur.

MONTAGE DU HAUT-PARLEUR

Utilisez les vis incluses pour monter le haut-parleur dans son emplacement. Utilisez les attaches rapides incluses si nécessaire

pour sécuriser le montage.

REMARQUE : Soyez prudent pour découper et visser des vis dans la ﬁbre de verre aﬁn d’éviter des rayures et des fêlures.

Stadium 6 et Stadium 8 Stadium 10

Other manuals for JBL STADIUM 6

This manual suits for next models

Table of contents

Languages:

Other Harman Speakers manuals

Harman

Harman JBL FLIP User manual

Harman

Harman JBL VERTEC DP Series Specification sheet

Harman

Harman JBL Charge4 User manual

Harman

Harman JBL PARTYBOX 1000 User manual

Harman

Harman JBL CINEMA SB180 User manual

Harman

Harman JBL CLIP 4 User manual

Harman

Harman JBL Link 500 User manual

Harman

Harman REVEL PERFORMA Be4 F226Be User manual

Harman

Harman harman/kardon HK OMNI 20 User manual

Harman

Harman JBL Link 20 Specification sheet

Harman

Harman JBL Conceal Series User manual

Harman

Harman Harman/Kardon Allure Instruction manual

Harman

Harman JBL Professional 3 MkII Series User manual

Harman

Harman JBL Home Theater Series User manual

Harman

Harman JBL CRUISE User manual

Harman

Harman JBL Control X Wireless User manual

Harman

Harman JBL PULSE2 User manual

Harman

Harman JBL AM5215/64-WH User manual

Harman

Harman JBL Charge 5 User manual

Harman

Harman JBL ARENA Series User manual

Harman

Harman JBL Horizon User manual

Harman

Harman JBL CBT 1000 User manual

Harman

Harman JBL BOOMBOX3 User manual

Harman

Harman Infinity KAPPA 753T User manual

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide