Harbor Breeze HTE21091 User manual

Español p. 20

AYRESHIRE CEILING FAN

ITEM # 4067991

MODEL #HTE21091

Serial Number Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 888-251-1003, 8 a. m. – 8 p.m., EST, Monday – Sunday. You could

also contact us at [email protected] or visit www.lowespartsplus.com.

AS21296

ATTACH YOUR RRECEIPT HERE

HARBOR BREEZE and logo design are

trademarks or registered trademarks of

TABLE OF CONTENTS

Package Contents...............................................................................................................

Hardware Contents.............................................................................................................

Safety Information...............................................................................................................

Preparation .........................................................................................................................

Initial Installation Instructions ....................................................................................................

Standard/Angle-Mounting Instructions.................................................................................

Wiring Instructions ..............................................................................................................

Final Installation Instruction..................................................................................................

Operating Instruction ..........................................................................................................

Care and Maintenance .......................................................................................................

Troubleshooting...................................................................................................................

Limited Lifetime Warranty....................................................................................................

Replacement Part List .........................................................................................................

FCC Warning....................................................................................................................... 18

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY

Canopy

Mounting Bracket

Downrod Assembly

Canopy Cover

Coupling Cover

F Motor Assembly 1

G Blade 3

H Switch Housing 1

I Light Kit 1

J Shade 1

K Remote Unit 1

Clevis Pin [Preassembled on

Downrod Assembly (B)]

Hairpin Clip [Preassembled on

Downrod Assembly (B)]

Coupling Screw

[Preassembled on Coupling (O)]

Coupling

[Preassembled on Motor Assembly (F)]

Mounting Bracket Screw

[Preassembled on Mounting Bracket (A)]

Mounting Screw

[Preassembled on Motor Assembly (F)]

Switch Housing Screw

[(Preassembled on Switch Housing (H)]

CR2032 3V

3h 6h

TIMER

HARDWARE CONTENTS (not shown actual size)

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, operate or install the product.

. All electrical connections must comply with local codes, ordinances or the National Electric Code (NEC).

Contact your municipal building department to inquire about your local codes, permits and/or inspections.

. Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse

or by switching off circuit breaker.

. Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

Never use a fixture in a two-wire system that is not grounded.

. If you are not sure your lighting system has a grounding means, do not attempt to install this fixture.

Contact a qualified, licensed electrician for information regarding proper grounding methods as required by

the local electrical code in your area.

. Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the floor

and at least 30 in. from the ends of the blades to any obstruction.

. If a dimmer control switch is used with this fixture, obtain professional advice to determine the correct type

and electrical rating required.

. The lighting fixture must be positioned so there is at least 1.64 ft. between the bulb and any illuminated

surface.

. For supply connections, if the conductor of a fan is identified as a grounded conductor, then it should be

connected to a grounded conductor power supply. If the conductor of a fan is identified as an ungrounded

conductor, then it should be connected to an ungrounded conductor power supply. If the conductor of a fan

is identified for equipment grounding, then it should be connected to an equipment-grounding conductor.

. Installing a fixture into an electrical system without a proper grounding means could allow metal parts of the

fixture to carry electrical currents. If any of the fixture wires, wire connections or splices are broken, cut or

loose during the mounting or normal operation of the fixture, under such condition, anyone coming in contact

with the fixture is subject to electrical shock, which could cause serious injury or death.

. Connection of the bare or green fixture ground wire to the black or white house wires may allow metal parts

of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will

receive electrical shock, which could cause serious injury or death.

. Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires

to have contact with any surface having a sharp edge. Doing so may damage or cut the wire insulation,

which could cause serious injury or death from electric shock.

DANGER

Qty: 9 + 1 extra

Blade Screw

WARNING

CAUTION

PREPARATION

Risk of fire. Most dwellings built before 1985 have supply wire rated for 140°F. Consult a qualified

electrician before installation.

To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed device

or variable speed control.

To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,

balancing or cleaning the fan.

Do not insert foreign objects in between rotating fan blades.

Do not install or use the fan if any part is damaged or missing

To reduce the risk of fire, electric shock or personal injury, mount to metal outlet box marked

'ACCEPTABLE FOR FAN SUPPORT OF 35 LBS OR LESS' and use mounting screws provided

with the outlet box and/or support directly from building structure. Most outlet boxes commonly

used for the support of luminaries are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

Before servicing or cleaning the unit, switch power off at the service panel and lock the service

disconnecting means to prevent power from being switched on accidentally. When the service

disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag,

to the service panel.

Chemical Burn Hazard. Keep batteries away from children. This remote contains a lithium button

cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can

cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure

the battery compartment. If the battery compartment does not close securely, stop using the product,

remove the batteries, and keep it away from children. If you think batteries might have been

swallowed or placed inside any part of the body, seek immediate medical attention.

Dispose of cells properly and keep away from children. Even used cells may cause injury.

Do not use lamp having a wattage greater than the maximum value stated on the fixture. Using a

higher wattage lamp than specified will increase fixture temperature and increase risk of fire.

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble

the product.

Estimated Assembly Time: 45 minutes

Tools Required for Assembly (not included): Phillips Screwdriver, Step Ladder, Tape, Pliers and Wire

Cutters.

INITIAL INSTALLATION INSTRUCTIONS

DANGER:

Failure to disconnect power supply prior to

installation may result in serious injury or death.

A. Standard Mounting:

B. Angle Mounting:

1. Turn off circuit breakers and wall switch to the fan supply

line leads.

2. Choose the desired mounting method:

Standard mounting is best suited for ceilings 8 feet or

higher. For taller ceilings you may want to use a longer

downrod (not included).

Angle-style mounting is best suited for angled or vaulted

ceilings. A longer downrod is sometimes necessary to

ensure proper blade clearance. If using the angle mount,

make sure the ceiling angle is not steeper than 20°.

Check existing outlet box (not included) to ensure it is

securely fastened to at least two points in a structural

ceiling member and can support the full weight of the fan.

Once verified, install mounting bracket (A) to the outlet

box using the screws and washers provided with the

outlet box.

DANGER: A loose outlet box can cause the fan to

wobble and increase the fan's potential to fall, which

could result in serious injury or death.

Note: If using the angle mount, make sure open end of

mounting bracket (A) points toward the ceiling.

For ALL mounting options, there must be at least 30 inches

from the blade tip to nearest wall. Also, ensure there is 7

feet from the bottom edge of the blade to the floor.

Standard

Mounting

Angle

Mounting

Turn Off Power Source

INITIAL INSTALLATION INSTRUCTIONS

4. Loosen the two coupling screws (N) preassembled in

the coupling (O), but do not remove them. Remove the

hairpin clip (M) and clevis pin (L) from the downrod

assembly (B). Retain for later use.

Note: Make sure to keep loose hardware separate to

avoid confusion during installation.

STANDARD/ANGLE-MOUNTING INSTRUCTIONS

1. Place downrod assembly (B) through canopy (C),

canopy cover (D) and coupling cover (E) .

Feed power wires from motor assembly (F) through

downrod assembly (B), then insert downrod assembly

(B) into the coupling (O) on motor assembly (F) .

2. Align the hole on downrod assembly (B) to hole on the

coupling (O), then re-install clevis pin (L). Re-attach

hairpin clip (M) into clevis pin (L) until it snaps into

place, then tighten the two previously loosened

coupling screws (N).

CAUTION: Ensure all screws are tight before moving

to the next step.

STANDARD/ANGLE-MOUNTING INSTRUCTIONS

3. Cut off excess fixture wires, leaving approximately 6 to

9 inches above the top of the downrod assembly (B).

Strip 1/2 inch of insulation from the end of each fixture

wire.

4. Carefully lift the assembly and rest the hanger ball of

downrod assembly (B) on the mounting bracket (A)

attached to the outlet box. Be sure the groove in the

hanger ball is lined up with the tab on the mounting

bracket (A). This will allow for hands-free wiring.

Proceed to WIRING on Page 9.

DANGER: Be careful when aligning the tab to the

groove! If not fully engaged, there is a possibility of the

fan falling, which may result in serious injury or death.

Hanger Ball

Groove

Tab

6 to 9 in.

Hardware Used

Wire Connector x 6

WIRING INSTRUCTIONS

1. Follow steps below to wiring your fan, once wiring step

has been completed, slide the wired receiver in between

the mounting bracket (A) and the top of the downrod

assembly (B) with the flat side of the receiver facing the

ceiling.

Connect WHITE wire from the fan to WHITE wire marked

TO MOTOR N from the receiver.

Connect BLUE wire from the fan to BLUE wire marked

FOR LIGHT from the receiver.

Connect BLACK wire from the fan to BLACK wire marked

TO MOTOR L from the receiver.

Connect BLACK wire from the outlet box to BLACK wire

marked AC IN L from the receiver.

Connect WHITE wire from the outlet box to WHITE wire

marked AC IN N from the receiver.

Connect GROUND (GREEN) wires from bracket and

downrod ball, to GROUND (GREEN or BARE COPPER)

from house.

WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse

box before hanging.

WARNING: If you are not sure if the outlet box is grounded, contact a licensed electrician for

advice, as it must be grounded for safe operation.

WARNING: If house wires are different colors than referred to in the following steps, stop

immediately. A professional electrician is recommended to determine proper wiring.

WARNING: If you feel that you do not have enough electrical wiring knowledge or experience,

have your fan installed by a licensed electrician.

2. Wrap electrical tape (not included) around each wire

connector and make sure no bare wire or wire strands

are visible after making connections. Then, turn wires

upward and carefully push them into the outlet box;

make sure the WHITE and GREEN connections are on

one side and the BLACK connections are on the other

side.

BLACK

BLUE

WHITE

GREEN

Outlet Box

Grounded/Green

White

Black

FINAL INSTALLATION INSTRUCTIONS

1. Loosen (but do not remove) the two preassembled

mounting bracket screws (P) on mounting bracket (A)

that align with the slotted holes on canopy (C). Lift

canopy (C) up so slotted holes engage loosened screw

heads on mounting bracket (A), then twist canopy (C)

clockwise, then tighten all screws securely.

2. Raise canopy cover (D) over the mounting screws (P)

visible in canopy (C). Rotate canopy cover (D) clockwise

until it locks into place. You may need to adjust the

mounting bracket screws (P) until the canopy (C) and

canopy cover (D) have a snug fit.

3. Insert blade (G) through slot on fan motor assembly (F),

align with three screw holes, tighten with blade screws

(AA) securely. Repeat for remaining blades.

Hardware Used

Blade Screw x 15

This manual suits for next models

Table of contents

Other Harbor Breeze Fan manuals

Harbor Breeze

Harbor Breeze C-UT56TBC3M User manual

Harbor Breeze

Harbor Breeze FAIRWIND User manual

Harbor Breeze

Harbor Breeze Impact 00966 User manual

Harbor Breeze

Harbor Breeze FREEPORT LP8079LAZ User manual

Harbor Breeze

Harbor Breeze MONTCLAIR E-CM54RBZ5CRCI User manual

Harbor Breeze

Harbor Breeze PLM52CB5D User manual

Harbor Breeze

Harbor Breeze KINGSBURY 40190 User manual

Harbor Breeze

Harbor Breeze E-CAF56OSB5CRC User manual

Harbor Breeze

Harbor Breeze BDB52ABZC5P User manual

Harbor Breeze

Harbor Breeze LANDON LAN52SS5L User manual

Harbor Breeze

Harbor Breeze 00880 User manual

Harbor Breeze

Harbor Breeze ANNANDALE 42864 User manual

Harbor Breeze

Harbor Breeze SOUTH RIVER C-ST52BNK5D1 User manual

Harbor Breeze

Harbor Breeze L1305 User manual

Harbor Breeze

Harbor Breeze CLASSIC STYLE 00819 User manual

Harbor Breeze

Harbor Breeze 00728 User manual

Harbor Breeze

Harbor Breeze VALDOSTA L1120H-BK User manual

Harbor Breeze

Harbor Breeze E-TM52BNK5LED User manual

Harbor Breeze

Harbor Breeze WINDRISE E-TLEII44BNK5C1 User manual

Harbor Breeze

Harbor Breeze TILGHMAN WCK52LMW5N User manual

Harbor Breeze

Harbor Breeze BELLEVUE E-BE44ABZ5C User manual

Harbor Breeze

Harbor Breeze MAZON MZ44MBK3LR User manual

Harbor Breeze

Harbor Breeze MERRIMACK 40942 Manual

Harbor Breeze

Harbor Breeze 40678 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual