Hanna Instruments HI 9057 User manual

Instruction Manual

HI 9056

HI 9057

Portable Microprocessor

Thermocouple

Thermometers

Manufacturers since 1978 These Instruments are in

Compliance with the CE Directives

PRELIMINARY EXAMINATION

GENERAL DESCRIPTION

HI 9056 performs temperature measure-

ments using interchangeable K-type ther-

mocouple probes.

HI 9057 performs temperature measure-

ments with different types of thermocouples

(K-J-T). This meter is equipped with a key

that switches range from K-type to J-type or

T-type thermocouples.

The non-linearity of the temperature probe

is linearized by the built-in microprocessor,

in order to achieve a high degree of accu-

racy and resolution. Also the HI9056 accu-

rately compensates for temperature drifts in

the measurement circuit and the reference

junction.

HI 9056 has two built-in K-type probe con-

nectors. By simply pressing a button, the

meter switches between the two readings on

the display. A "∆T" button will display the

difference between the two probe readings.

TABLE OF CONTENTS

Preliminary Examination ............................ 3

General Description ................................... 3

Functional Description &

Specifications of HI 9056 .......................... 5

Functional Description &

Specifications of HI 9057 .......................... 6

Operational Guide ...................................... 7

Display Codes Guide ............................... 11

Calibration ................................................ 12

Battery Replacement ............................... 12

Shockproof Rubber Boots ........................ 13

Accessories .............................................. 14

Warranty .................................................. 18

CE Declaration of Conformity ................. 19

Dear Customer,

Thank you for choosing a Hanna Product.

Please read this instruction manual carefully

before using the instrument.

This manual will provide you with the neces-

sary information for a correct use of the

instrument, as well as a precise idea of its

versatility.

If you need more technical information, do

not hesitate to e-mail us at

[email protected].

These instruments are in compliance with

directives.

Remove the instrument from the packing ma-

terial and examine it carefully to make sure

that no damage has occurred during ship-

ping. If there is any damage, notify your

Dealer or the nearest Hanna Customer Ser-

vice Center.

Each meter comes supplied complete with a

9V battery and instruction manual:

Note: Save all packing material until you are

sure that the instrument functions cor-

rectly. All defective item must be returned

in the original packing with the supplied

accessories.

1. Liquid Crystal Display

2. ON/OFF Key

3. Reading Memory/Hold Key

4. Measurement Resolution Key (0.1 or 1)

5. Input Probe Selection Key (T1 or T2)

6. Temperatures Difference Key

7. Memory Recalling Key.

Specifications

Range -200.0 to 1370°C

Resolution 0.1°C (-200.0 to 999.9°C)

1°C (1000 to 1370°C)

Accuracy ±0.2% F.S.

(@20°C / 68°F) for one year, excluding probe error

Typical EMC ±3°C

Deviation ±6°F

Probe K-thermocouple (optional)

(see pages 14-17)

Battery 9V/300 hours of continuous use

Environment 0 to 50°C (32 to 122°F); 95% RH

Dimensions 180 x 83 x 40 mm (7.1 x 3.3 x 1.6")

Weight 350 g (12.4 oz.)

FUNCTIONAL DESCRIPTION AND

SPECIFICATIONS FOR HI 9056

Standard features include:

• Interchangeable probes

• Clear Liquid Crystal Display

• Two year Warranty

• Possibility of switching between the Cen-

tigrade and the Fahrenheit scale (for

HI 9057 only)

• HOLD function that freezes the reading

on the display (for HI 9057 only)

• HI-LO memory recall function (for HI 9057

only)

• Low battery detection.

All these functions are easily accessible

through the keypad.

Self-explanatory symbols are used to re-

mind the user of the operating mode or

condition.

Hanna manufactures several K-type ther-

mocouple probes for different applications.

See pages 14-17 for more details.

OPERATIONAL GUIDE

INITIAL PREPARATION

Remove the battery cover on

the rear of your thermom-

eter, unwrap the battery and

connect it to the clip. Insert

the battery into the compart-

ment and replace the cover.

To switch on, press ON/OFF

on the front of the unit.

The thermometer performs a

self diagnostic test. The LCD

dispalys all the segments at

once, to ensure none are

missing.

After the test, the thermometer will switch to

the measurement mode.

If a temperature probe is plugged in, the

unit will display the temperature.

If the probe is not plugged

in, the display will show

"----".

To switch your thermometer off, press ON/

OFF again.

MEASURING SCALE (°C/°F)(HI 9057

only)

When the meter is turned on, it automati-

cally defaults to the °C scale. Measurements

can be performed on either the Centigrade

or the Fahrenheit scale.

BAT

HOLD K J T

ºC

ºF

OFF

1. Liquid Crystal Display

2. ON/OFF Key

3. Reading Memory/Hold Key

4. Thermocouple Type Selection Key (K or J or T)

5. Minimum Temperature Recalling Key

6. Maximum Temperature Recalling Key

7. Measuring Scale key (°C or °F).

Specifications

Range K -200.0 to 1370°C / -300.0 to 2500°F

J-200.0 to 900.0°C / -300.0 to 1650°F

T-200.0 to 400.0°C / -300.0 to 750.0°F

Resolution 0.1°C (up to 999.9°C) 0.1°F(up to 999.9°F)

1°C (over 1000°C) 1°F (over 1000°F)

Accuracy K= ±0.2% F.S.

(@20°C / 68°F) J = ±0.2% F.S.

T = ±0.5% F.S.

for one year, excluding probe error

Typical EMC ±3°C

Deviation ±6°F

Probe K, J and T thermocouple (optional)

(for K-thermocouple see pages 14-17)

Battery 9V/300 hours of continuous use

Environment 0 to 50°C (32 to 122°F); 95% RH

Dimensions 180 x 83 x 40 mm (7.1 x 3.3 x 1.6")

Weight 350 g (12.4 oz.)

FUNCTIONAL DESCRIPTION AND

SPECIFICATIONS OF HI 9057

Check the highest or lowest measured tem-

perature by pressing the respective HI or

LO key. The appropriate display indicator,

"HI" or "LO", will light up together with the

value retrieved from memory.

Release the key to resume normal opera-

tion.

CLEAR HI-LO FUNCTION (HI 9057

only)

By pressing HI and LO simultaneously the

present measurement reading is assigned in

memory as the highest and lowest tempera-

ture reading, i.e. both "HI" and "LO" will

have equal temperature readings.

MEMORY FUNCTION (HI 9056 only)

The memory & hold function is activated by

MEM HOLD. The measured temperature is

stored in memory and frozen on the display

when this function key is pressed and held.

°C

MEM

HOLD

To change the scale, press °C/°F once.

MEASUREMENT RESOLUTION

When switched on, HI 9056

and HI 9057 default to a 0.1

digit resolution (see specifi-

cations).

These instruments automatically change the

resolution to 1 degree when the measured

temperature is higher than 999.9°C.

In HI 9056, when the tem-

perature is lower than

999.9°C it is possible to

change the resolution by

pressing the 0.1/1 key.

HOLD MODE (HI 9057 only)

The reading hold function is activated by

the HOLD key.

To freeze the measured temperature on the

display, press and hold the HOLD key.

"HOLD" is displayed when this key is pressed.

As soon as the HOLD key is released, the

meter returns to normal operational mode.

HI-LO FUNCTION (HI 9057 only)

Maximum and minimum temperatures are

monitored throughout a continuous measur-

ing process.

The values may be recalled or cleared at

any time during the measurement.

°C

°F

°C

HOLD

1110

TEMPERATURE DIFFERENCE

(

HI 9056 only)

The difference between the temperature

measured by the two probes can be dis-

played by simply pressing ∆T. A "∆" will

appear on the left-hand of the display to

indicate this function.

LOW BATTERY DETECTION

To save battery life, HI 9056 and HI 9057

will switch off after 5 minutes.

When the battery is low the

user is prompted by the word

"BAT"to substitute the bat-

tery (see page 12).

∆

DISPLAY CODES GUIDE

Display Description

---- The probe is not connected to the instrument

or the reading is out of range

BAT Weak battery, needs to be replaced

HI 9056:

HOLD Freezes current reading on display and stores

MEM the reading into memory

MEM Indicates the value of the temperature stored

into memory

K1 or K2 Temperature at probe 1 or 2 respectively

∆∆

∆Difference between temperatures at the two

probes

HI 9057:

°C The instrument is reading in the Centigrade

scale

°F The instrument is reading in the Fahrenheit

scale

HI Displays the highest measured temperature

LO Displays the lowest measured temperature

HOLD Freezes current reading on display

K,Jor TThermocouple probe type in use

The memory value will be overridden each

time the memory & hold function is acti-

vated. A blinking "MEM" on display indi-

cates the operating mode.

Press and hold MR to recall previously stored

temperature reading. In this mode of opera-

tion, the display indicator "MEM" is shown.

If no data is found, "----"

will be displayed.

THERMOCOUPLE TYPE SELECTION

(HI 9057 only)

By pressing KJT the user is allowed to set

the thermometer according to the connected

thermocouple type, and the related symbol

will be displayed, i.e.:

K for K-Type, J for J-Type, T for T-Type.

PROBE INPUT SELECTION (HI 9056 only)

When switched on, the in-

strument automatically shows

the temperature measured by

Probe 1 and a "K1" appears

on the LCD display.

To view the input temperature of Probe 2,

press T1/T2 and "K2" will be displayed.

MEM

KTJ

K 1

K 2

1312

SHOCKPROOF RUBBER BOOTS

These rubber boots are specially made to

prolong the life of your instruments and to

prevent damage due to accidental falls.

They and are available in two different col-

ors:

HI 710009 = blue colored

HI 710010 = orange colored

Select the proper color according to your

preference.

CALIBRATION

All Hanna Instruments thermometers have

been accurately pre-calibrated at the fac-

tory.

It is generally recommended to have all

thermometers recalibrated at least once a

year.

For an accurate annual recalibration, con-

tact your nearest Hanna Service Center.

BATTERY REPLACEMENT

When the battery is low

the user is warned by the

"BAT" indication on the

instrument's display. Re-

place the battery immedi-

ately.

Battery should only be replaced in a safe

area using the battery type specified in this

instruction manual (see page 17).

Remove the battery com-

partment cover on the rear

of the meter and replace

the 9V battery with a new

one. Make sure the battery

contact is tight before re-

placing the cover.

The meter may turn on au-

tomatically when a new bat-

tery is connected. You can

turn it off by pressing

ON/OFF.

1514

HI 766PE1 General use probe, max 900°C/1650°F

HI 766PE2 General use probe, max 900°C/1650°F

HI 766HD Rugged thermocouple probe handle

with 1 m (3.3' ) cable fitted with a mini-

connector

with integral handle, 1 m cable & mini-

connector:

HI 766A Roller surface probe, max 320°C/600°F

HI 766B Surface probe, max 650°C/1200°F

420mm

13.3"

280mm

11"

100mm

16.5"

400mm

15.7"

260mm

10.2"

155mm

6.1" 3mm

0.12"

200mm

7.8" 5mm

0.20"

100mm

280mm

7.8"

3mm

0.12"

155mm

6.1"

250mm

9.8"

3mm

0.12"

11"

200mm

7.9"

ACCESSORIES

K-Type Thermocouple Probes

with detachable handle & mini-connec-

tor

(to be plugged into HI 766HD probe handle):

HI 766PA Roller surface probe, max 320°C/600°F

HI 766PB Surface probe, max 650°C/1200°F

HI 766PC Penetration probe, max 900°C/1650°F

HI 766PD Air probe, max 300°C/570°F

1716

HI 766E2 General use probe, max 900°C/1650°F

HI 766F High temperature wire probe without

handle, max 1100°C/2000°F

HI 766F1 Flexible probe without handle, max

480°C/900°F

HI 766TV1 Pipe clamp probe, max 200°C/390°F

1.5mm

0.06"

255mm

10"

3.3’

2mm

0.08"

35mm

1.4" Max.

360mm

13.8" 220mm

8.5" 5mm

0.2"

Other accessories:

HI 710002 Soft carrying case

HI 710009 Blue rubber boot

HI 710010 Orange rubber boot

300mm

11.8"

30mm

1.2"

130mm

5.1"

8mm

0.3"

HI 766B1 90° surface probe, max 450°C/840°F

HI 766B2 Surface probe, max 900°C/1650°F

HI 766B3 Small surface probe with insulated shaft,

max 200°C/390°F

HI 766C Penetration probe, max 900°C/1650°F

HI 766D Air probe, max 300°C/570°F

HI 766E1 General use probe, max 900°C/1650°F

130mm

5.1"

5mm

0.2"

260mm

10.3" 120mm

4.8" 3mm

0.12"

385mm

15.2" 245mm

9.6" 3mm

0.12"

260mm

10.2" 120mm

4.7" 3mm

0.12"

1918

CE DECLARATION OF CONFORMITY

Recommendations for Users

Before using these products, make sure that they are entirely suitable for the

environment in which they are used.

Operation of these instruments in residential areas could cause unacceptable

interferences to radio and TV equipment, requiring the operator to take all neces-

sary steps to correct interferences.

Any variation introduced by the user to the supplied equipment may degrade the

instrument's EMC performance.

In particular cases the instruments could turn off. In such cases they can be

turned on by pressing the ON/OFF key.

To avoid electrical shock, do not use these instruments when voltages at the

measurement surface exceed 24VAC or 60 VDC.

To avoid damages or burns, do not perform any measurement in microwave

ovens.

WARRANTY

All Hanna Instruments meters are guaranteed

for two years against defects in workmanship

and materials when used for their intended

purpose and maintained according to instruc-

tions. The electrodes and the probes are

guaranteed for a period of six months. This

warranty is limited to repair or replacement

free of charge.

Damage due to accident, misuse, tampering

or lack of prescribed maintenance are not

covered.

If service is required, contact the dealer from

whom you purchased the instrument. If under

warranty, report the model number, date of

purchase, serial number and the nature of the

failure. If the repair is not covered by the

warranty, you will be notified of the charges

incurred. If the instrument is to be returned to

Hanna Instruments, first obtain a Returned

Goods Authorization number from the Cus-

tomer Service department and then send it

with shipping costs prepaid. When shipping

any instrument, make sure it is properly pack-

aged for complete protection.

To validate your warranty, fill out and return

the enclosed warranty card within 14 days

from the date of purchase.

All rights are reserved. Reproduction in whole

or in part is prohibited without the written

consent of the copyright owner,

Hanna Instruments Inc., 584 Park East Drive,

Woonsocket, Rhode Island, 02895 , USA.

Hanna Instruments reserves the right to

modify the design, construction and ap-

pearance of its products without advance

notice.

Table of contents

Other Hanna Instruments Thermometer manuals

Hanna Instruments

Hanna Instruments HI 935005 User manual

Hanna Instruments

Hanna Instruments Checktemp Dip HI98539 User manual

Hanna Instruments

Hanna Instruments HI 92804 User manual

Hanna Instruments

Hanna Instruments HI 9063 User manual

Hanna Instruments

Hanna Instruments HI 145-00 User manual

Hanna Instruments

Hanna Instruments HI 146-00 User manual

Hanna Instruments

Hanna Instruments HI 955202 User manual

Hanna Instruments

Hanna Instruments DiST 7 User manual

Hanna Instruments

Hanna Instruments HI 146-01 User manual

Hanna Instruments

Hanna Instruments HI98197 User manual

Hanna Instruments

Hanna Instruments HI 955502 User manual

Hanna Instruments

Hanna Instruments HI 9040 User manual

Hanna Instruments

Hanna Instruments HI 98509-1 User manual

Hanna Instruments

Hanna Instruments Checktemp1 HI 98510 User manual

Hanna Instruments

Hanna Instruments HI 98710 User manual

Hanna Instruments

Hanna Instruments HI 145-01 User manual

Hanna Instruments

Hanna Instruments HI150-00 User manual

Hanna Instruments

Hanna Instruments Foodcare HI 93501 User manual

Hanna Instruments

Hanna Instruments HI 93510N User manual

Hanna Instruments

Hanna Instruments HI 98701 User manual

Hanna Instruments

Hanna Instruments HI98517/HI98518 User manual

Hanna Instruments

Hanna Instruments HI 9060 User manual

Hanna Instruments

Hanna Instruments HI 98710 User manual

Hanna Instruments

Hanna Instruments HI 148 Series User manual

Popular Thermometer manuals by other brands

Delton

Delton 981A instruction manual

Baker

Baker MM2P instruction manual

Tarmo

Tarmo 320281 manual

Citizen

Citizen CTD 504 instruction manual

TFA

TFA 14.1500 instruction manual

Vive

Vive DMD1010 user manual

Gotemp

Gotemp THB4002 user guide

GREISINGER

GREISINGER G 1202 Quick reference guide

Amprobe

Amprobe TMD-53W user manual

Trotec

Trotec BP10 operating manual

Radiance instruments

Radiance instruments RT616 Series product manual

Eurolec

Eurolec IR151 operating instructions

Scaneo

Scaneo TS42B instruction manual

Sper scientific

Sper scientific 800043 instruction manual

Microlife

Microlife NC 200 Operating instructions manual

Motorola

Motorola MBP69SN General questions

The MeatStick

The MeatStick The MeatStick quick start guide

Hama

Hama TH35-A operating instructions