Hanna Instruments HI 151-00 User manual

IST151-R6 05/05 www.hannainst.com

Instruction Manual

Checktemp 4

(HI 151-00 and HI 151-01)

Rugged Folding

Thermometers

SPECIFICATIONS

HI 151-00

Range -50.0 to 220°C

Resolution 0.1°C (-50.0 to 199.9°C); 1°C (200 to 220°C)

Accuracy ±0.3°C ±1 digit (-20.0 to 90.0°C);

±1% f.s. ±1 digit (outside)

Typical EMC Deviation ±0.3°C

HI 151-01

Range -58.0 to 428°F

Resolution 0.1°F (-58.0 to 199.9°F); 1°F (200 to 428°F)

Accuracy ±0.5°F ±1 digit (-4.0 to 194.0°F);

±1% f.s. ±1 digit (outside)

Typical EMC Deviation ±0.6°F

Common specifications

Probe Stainless steel sharp probe (117 x dia 3.5 mm)

Calibration Factory calibrated

Calibration Check Automatic, at start-up

Battery Type/Life 1x1.5V AA / 25.000 hours of continuous use

Auto-off After 8 minutes of non-use

Dimensions 165 x 50 x 20 mm (6.5 x 2.0 x 0.8”)

Weight 100 g (3.5 oz.)

WARRANTY

HI 151-00 and HI 151-01 are warranted for one year against defects in workmanship

and materials when used for its intended purpose and maintained according to instructions.

This warranty is limited to repair or replacement free of charge. Damages due to accident,

misuse, tampering or lack of prescribed maintenance are not covered.

If service is required, contact the dealer from whom you purchased the instrument. If under

warranty, report the model number, date of purchase, serial number and the nature of the

failure. If the repair is not covered by the warranty, you will be notified of the charges incurred.

If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authori-

zation Number from the Customer Service department and then send it with shipment costs

prepaid. When shipping any instrument, make sure it is properly packaged for complete

protection.

Recommendations for Users

Before using these products, make sure that they are entirely suitable for the environment in which they are used. Operation of

these instruments in residential areas could cause unacceptable interferences to radio and TV equipment. Any variation

introduced by the user to the supplied equipment may degrade the instrument’s EMC performance. To avoid electrical shock, do

not use these instruments when voltages at the measurement surface exceed 24 Vac or 60 Vdc. To avoid damages or burns, do

not perform any measurement in microwave ovens.

Checktemp 4 are high accuracy thermometers, easy to use, offering quick and

precise measurements.

Checktemp 4 is the ideal solution for food applications. The sharp stainless

steel probe is specially designed for penetration of cooked as well as on semi-

frozen food. In addition, the probe nestles in the casing to make the

thermometers truly portable.

Checktemp 4 is equipped with the Cal-Check feature. Every time the meter is

turned on, it performs a self test of its calibration status and provides a visual

confirmation.

Two models are available:

• HI 151-00 measures temperature in °C

• HI 151-01 measures temperature in °F.

The meters are calibrated using four temperature points.

TAKING MEASUREMENTS

• Turn the meter on by simply opening the probe.

• Introduce the probe in the sample. For ideal measurement an immersion level

of 4 cm (11/2’’) is recommended. Wait for a few seconds for the reading to

stabilize and for the temperature value be displayed on the LCD.

• After 5 minutes, the meter switches itself off. To restart, close and open the

probe again.

• Turn the meter off by closing the probe and returning it to its original position.

Note:Clean the probe after use and before storing it.

CALIBRATION SELF CHECK

Every time the meter is switched on, it checks its calibration status.

If the LCD displays “CAL” and then -0- the meter is calibrated and in a few

seconds it will be ready for normal operating mode.

If the meter is not calibrated or the battery level is too low, the “Err” indication

appears on the LCD.

First replace the battery as described below; if the “Err” warning message is still

displayed, contact your dealer or your nearest Hanna Service Center for recalibra-

tion.

BATTERY REPLACEMENT

“Err” warning message, variations in readings or fading display can indicate a

low battery level. Remove the cover of the battery compartment on the back side

and replace the 1.5V AA battery while paying attention to its polarity.

CE DECLARATION OF CONFORMITY

This manual suits for next models

Other Hanna Instruments Thermometer manuals

Hanna Instruments

Hanna Instruments Checktemp HI 98501 User manual

Hanna Instruments

Hanna Instruments Checktemp1 HI 98510 User manual

Hanna Instruments

Hanna Instruments DiST 7 User manual

Hanna Instruments

Hanna Instruments Pool Line HI985394 User manual

Hanna Instruments

Hanna Instruments HI 98501-1 User manual

Hanna Instruments

Hanna Instruments HI 9057 User manual

Hanna Instruments

Hanna Instruments HI 955501 User manual

Hanna Instruments

Hanna Instruments HI 92804 User manual

Hanna Instruments

Hanna Instruments HI145-20 User manual

Hanna Instruments

Hanna Instruments Foodcare HI 93501 User manual

Hanna Instruments

Hanna Instruments HI 935005 User manual

Hanna Instruments

Hanna Instruments HI 9061 User manual

Hanna Instruments

Hanna Instruments HI 9063 User manual

Hanna Instruments

Hanna Instruments HI 149-00 User manual

Hanna Instruments

Hanna Instruments HI 149-00 User manual

Hanna Instruments

Hanna Instruments HI 98701 User manual

Hanna Instruments

Hanna Instruments Checktemp Dip HI98539 User manual

Hanna Instruments

Hanna Instruments Checktemp2 User manual

Hanna Instruments

Hanna Instruments HI145-00 User manual

Hanna Instruments

Hanna Instruments HI 9040 User manual

Hanna Instruments

Hanna Instruments HI 146-00 User manual

Hanna Instruments

Hanna Instruments HI 92840 User manual

Hanna Instruments

Hanna Instruments HI 145-00 User manual

Hanna Instruments

Hanna Instruments HI 93551 User manual

Popular Thermometer manuals by other brands

Delton

Delton 981A instruction manual

Baker

Baker MM2P instruction manual

Tarmo

Tarmo 320281 manual

Citizen

Citizen CTD 504 instruction manual

TFA

TFA 14.1500 instruction manual

Vive

Vive DMD1010 user manual

Gotemp

Gotemp THB4002 user guide

GREISINGER

GREISINGER G 1202 Quick reference guide

Amprobe

Amprobe TMD-53W user manual

Trotec

Trotec BP10 operating manual

Radiance instruments

Radiance instruments RT616 Series product manual

Eurolec

Eurolec IR151 operating instructions

Scaneo

Scaneo TS42B instruction manual

Sper scientific

Sper scientific 800043 instruction manual

Microlife

Microlife NC 200 Operating instructions manual

Motorola

Motorola MBP69SN General questions

The MeatStick

The MeatStick The MeatStick quick start guide

Hama

Hama TH35-A operating instructions