Hand Held Products IK8560 User manual
™
Image Kiosk 8560/8570
with Microsoft
®
Windows
®
CE 5.0
con Microsoft
®
Windows
®
CE 5.0
com o Microsoft
®
Windows
®
CE 5.0
Quick Start Guide
Guía de Inicio Rápido
Guia rápido de introdução
EN-1
Image Kiosk 8560/8570
Quick Start Guide
Hardware Requirements
Verify that you have the necessary hardware to install your device:
• IK8560/70 device
• Power cable with AC adapter power supply
• Communication cable
• Image Kiosk 8560/8570 Quick Start Guide
Be sure to keep the original packaging in case the device needs to be shipped
for service.
Front Panel
Illumination
Cone
Touch
Screen
Display
Image Engine
IK8560 IK8570
Magnetic
Stripe
Reader
EN-2
Back Panel
USB
Host
Port
DB15
Connector
Screw Holes
(for mounting) Wire Slots
(for cable wires)
IK8560EE,
IK8570E, &
IK8570EUE:
Ethernet
Connector
IK8560CE &
IK8560CEUE:
RJ45 Jack is
not functional.
EN-3
Step 1. Connect the Power and USB Communication Cables
Use only IK8560/70 power cables and power adapters. Use of peripherals, cables, or
power adapters not sold/manufactured by Hand Held Products will void the warranty and
may damage the device.
To run, the IK8560/70 must be connected to an external power source at all
times.
Note: Make sure the power switch is turned off on the workstation where you
are installing the IK8560/70.
1. Plug the 15-pin
connector (HDB15)
on the cable into the
DB15 connector on
the back of the
IK8560/70.
2. Plug the USB
connector into the
port on your host
workstation.
3. Plug the power plug
into the pod on the
communication
cable.
4. Plug the AC power
supply into a power
outlet.
Hardware installation is now complete. Your IK8560/70 powers on and auto-
configures to USB.
Note: These instructions specify the USB communication cable (p/n 42206398-
01E). For information about additional cables, consult the Image Kiosk
8560/8570 User’s Guide.
Step 2. Boot the Device
1. The IK8560/70 begins booting as soon as power is applied from the cable.
2. The splash screen appears as the system cold boots. The software version
numbers for both the bootloader and the kernel appear on the splash screen.
3. The device begins loading software; this is Autoinstall. A status bar appears
for each program that loads. Do NOT interrupt Autoinstall!
4. Autoinstall completes and the splash screen appears again as the system
warm boots.
!
2
4
3
1
Host
EN-4
5. When initial boot is complete, the Start screen appears.
You are now ready to use the IK8560/70.
Microsoft® ActiveSync®Communication
When you power on the workstation, you will receive a message about new USB
hardware. You must have the IK8560.inf and wceusbsh.sys files installed in the
Windows\System32 directory on your workstation to establish ActiveSync
communication with the IK8560/70 device.
You can download these files from www.handheld.com.
For complete installation instructions, please refer to the Image Kiosk 8560/8570
User’s Guide, which is also available for download at www.handheld.com.
Rebooting the Device
There are two ways to reboot the device: warm boot and cold boot. A warm boot
preserves data and applications stored in RAM memory. A cold boot erases RAM
data and applications and runs Autoinstall.
Warm Boot: Tap Start > Power Tools > Reboot > Warm Boot.
Cold Boot: Power cycle or reset switch (for reset switch details, refer to the
Image Kiosk 8560/8570 User’s Guide).
Opens the Start menu. Tap to toggle between open
applications.
Tap to open soft input panel
(keyboard).
Time and date.
Displays cable and
network connections.
EN-5
Technical Assistance
If you need assistance installing or troubleshooting, please call your Distributor
or the nearest Hand Held Products technical support office:
North America/Canada
Telephone: (800) 782-4263, option 4 (8 a.m. to 6 p.m. EST)
Fax number: (315) 685-4960
E-mail: [email protected]
Latin America
Telephone: (704) 998-3998, option 8, option 3
Telephone: (800) 782-4263, option 8, option 3
E-mail: [email protected]
Brazil
Telephone: +55 (21) 2178-0500
Fax: +55 (21) 2178-0505
E-mail: [email protected]
Mexico
Telephone: (704) 998-3998, option 8, option 3
E-mail: [email protected]
Europe, Middle East, and Africa
Telephone: +31 (0) 40 7999 393
Fax: +31 (0) 40 2425 672
E-mail: [email protected]
Asia Pacific
Telephone - Hong Kong:+852-3188-3485 or
2511-3050
Telephone - China: +86 21 6361 3818
E-mail: [email protected]
Japan
Telephone: +813 5770-6312
E-mail: [email protected]
Malaysia
Telephone: +603-6201-7020
E-mail: [email protected]
Online Technical Assistance
You can also access technical assistance online at www.handheld.com.
For Further Information
To download the full User’s Guide for these products, visit our website at
www.handheld.com
.
EN-6
Product Service and Repair
Hand Held Products provides service for all its products through service centers
throughout the world. To obtain warranty or non-warranty service, return the unit
to Hand Held Products (postage paid) with a copy of the dated purchase record
attached. Contact the appropriate location below to obtain a Return Material
Authorization number (RMA #) before returning the product.
North America
Telephone: (800) 782-4263, option 3
Fax: (704) 566-6015
E-mail: [email protected]
Latin America
Telephone: (704) 998-3998, option 8, option 4
Telephone: (800) 782-4263, option 8, option 3
Fax: (239) 263-9689
E-mail: [email protected]
Brazil
Telephone: +55 (21) 2178-0500
Fax: +55 (21) 2178-0505
E-mail: [email protected]
Mexico
Telephone: +52 (55) 5203-2100
Fax: +52 (55) 5531-3672
E-mail: [email protected]
Europe, Middle East, and Africa
Telephone: +31 (0) 40 2901 633
Fax: +31 (0) 40 2901 631
E-mail: [email protected]
Asia Pacific
Telephone: +852-2511-3050
Fax: +852-2511-3557
E-mail: [email protected]
Japan
Telephone: +813-5770-6312
Fax: +813-5770-6313
E-mail: [email protected]
Online Product Service and Repair Assistance
You can also access product service and repair assistance online at
www.handheld.com.
ES-1
Guía de inicio rápido de
Image Kiosk 8560/8570
Requisitos de hardware
Compruebe que tiene el hardware necesario para instalar su dispositivo:
• Dispositivo IK8560/70
• Cable eléctrico con suministro de energía de adaptador de corriente alterna
• Cable de comunicación
• Guía de inicio rápido de Image Kiosk 8560/8570
Asegúrese de conservar el envase original en caso de que el dispositivo tenga
que enviarse a reparar.
Panel delantero
Cono de
iluminación
Pantalla
de toque
Motor de imagen
IK8560 IK8570
Lector de Banda
Magnética
ES-2
Panel posterior
Puerto
principal
USB
Conector
DB15
Agujeros para tornillos
(para montar) Ranuras para cables
(para los cables)
IK8560EE,
IK8570E, &
IK8570EUE:
Ethernet
Connector
IK8560CE &
IK8560CEUE: El
conector RJ45 no
esta habilitado
Other manuals for IK8560
1
This manual suits for next models
4
Table of contents
Languages:
Other Hand Held Products Barcode Reader manuals
Hand Held Products
Hand Held Products HandHeld 3800 Linear Series User manual
Hand Held Products
Hand Held Products DOLPHIN RF User manual
Hand Held Products
Hand Held Products SV Series User manual
Hand Held Products
Hand Held Products Quick Check QCOLV-SV100 User manual
Hand Held Products
Hand Held Products 4800p User manual
Hand Held Products
Hand Held Products IMAGETEAM 3900i User manual
Hand Held Products
Hand Held Products HandHeld 3800 Linear Series User manual
Hand Held Products
Hand Held Products 4800p User manual
Hand Held Products
Hand Held Products HandHeld 3800 Linear Series User manual
Hand Held Products
Hand Held Products IK8560 User manual
Hand Held Products
Hand Held Products QUICK CHECK 890 User manual
Hand Held Products
Hand Held Products Scanteam 5700 User manual
Hand Held Products
Hand Held Products HandHeld 3800 Linear Series User manual
Hand Held Products
Hand Held Products 2020 User guide
Hand Held Products
Hand Held Products 3800LR User manual
Hand Held Products
Hand Held Products 4600g User manual
Hand Held Products
Hand Held Products 3800ESD User manual
Hand Held Products
Hand Held Products 3200 User manual
Hand Held Products
Hand Held Products Quick Check 200 Series User manual
Hand Held Products
Hand Held Products 4230 User manual
