HAMPTON BAY RENWICK 656 416 User manual

Date Purchased

Store Purchased

Model No.

Serial No.

Vendor No.

UPC

14826

656-416

792145353072

The retailer warrants the fan motor to be free from defects in workmanship and material

present at time of shipment from the factory for a lifetime after the date of purchase by the

original purchaser. The retailer also warrants that all other fan parts, excluding any glass or

plexiglass parts, to be free from defects in workmanship and material at the time of shipment

from the factory for a period of one year after the date of purchase by the original purchaser.

We agree to correct such defects without charge or at our option replace with a comparable or

superior model if the product is returned to the retailer. To obtain warranty service, you must

present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the

product are your responsibility. Damage to any part such as by accident or misuse or improper

installation or by affixing any accessories, is not covered by this warranty. Because of varying

climatic conditions in the United States this warranty does not cover any changes in brass

finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type

give their longest useful life when protected from varying weather conditions. A certain

amount of wobble is normal and should not be considered a defect. Servicing performed by

unauthorized persons shall render the warranty invalid. There is no other express warranty.

The retailer hereby disclaims any and all warranties, including but not limited to. Those of

merchantability and fitness for a particular purpose to the extent permitted by law. The

duration of any implied warranty which cannot be disclaimed is limited to the time period as

specified in the express warranty. Some states do not allow limitation on how long an implied

warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable

for incidental, consequential, or special damages arising out of or in connection with product

use or performance except as may otherwise be accorded by law. Some states do not allow the

exclusion of incidental or consequential damages, so the above exclusion or limitation may

not apply to you. This warranty gives specific legal rights, and you may also have other rights

which vary from state to state. This warranty supersedes all prior warranties.

Hampton Bay Lifetime Limited Warranty

Table of Contents

Safety Rules..................................................................................................................................................................................

Unpacking Your Fan ...................................................................................................................................................................

Installing Your Fan ......................................................................................................................................................................

Installing the Light Kit.................................................................................................................................................................

Operating Your Transmitter.........................................................................................................................................................

Care of Your Fan.......................................................................................................................................................................

Troubleshooting .........................................................................................................................................................................

Specifications .............................................................................................................................................................................

11.

12.

13.

1. Safety Rules

1. To reduce the risk of electric shock, insure electricity has been turned

off at the circuit breaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical Code and

local electrical codes. Electrical installation should be performed by a

qualified licensed electrician.

3. WARNING: To reduce the risk of electrical shock and fire, do not use

this fan with any solid-state fan speed control device.

4. WARNING: To reduce the risk of personal injury, use only the two

steel screws (and lock washers) provided with the outlet box for

mounting to the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may

need to be replaced, consult a qualified electrician if in doubt.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE

FOR FAN SUPPORT.

5. The outlet box and support structure must be securely mounted and

capable of reliably supporting a minimum of 50 pounds. Use only CUL

Listed outlet boxes marked FOR FAN SUPPORT.

6. The fan must be mounted with a minimum of 7 feet clearance from the

trailing edge of the blades to the floor.

7. Do not operate the reverse switch while the fan blades are in motion. The

fan must be turned off and the blades stopped before reversing the blades

direction.

8. Avoid placing objects in the path of the blades.

9. To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan blades. A

dry dust cloth or lightly dampened cloth will be suitable for most

cleaning.

11. After making electrical connections, spliced conductors should be

turned upward and pushed carefully up into the outlet box. The wires

should be spread apart with the grounded conductor and the equipment-

grounding conductor on one side of the outlet box.

12. Electrical diagrams are for reference only. Light kits that are not packed

with the fan must be CUL Listed and marked suitable for use with the

model fan you are installing. Switches must be CUL General Use

Switches. Refer to the Instructions packaged with the light kits and

switches for proper assembly.

NOTE

READ AND SAVE ALL INSTRUCTIONS!

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS BRACKETS) DURING

ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT OBJECTS

IN THE PATH OF THE BLADES.

Unpack your fan and check the contents. You should have the following items:

Unpacking Your Fan 2.

13. Loose parts bag containing:

a. Electrical hardware

Screws (2 PCs.)

Lock washers (2 PCs.)

Metal washers (2 PCs.)

3 plastic wire connecting nuts (3 PCs.)

b. Blade attachment hardware

(16 screws)

WARNING

DO NOT INSTALL OR USE FAN

IF ANY PART IS DAMAGED OR MISSING.

CALL TOLL FREE 1-877-902-5588.

258

1. Set of blade (5)

2. Mounting bracket

3. Fan motor assembly

4. Motor housing

5. Set of blade bracket (5)

6. Mounting plate

7. Light kit assembly

8. Glass shade

9. Receiver with 6 wire nuts

10. Transmitter+holder+2 mounting screws

+ 2 plastic plugs

11. Extra plastic plug

12. Balancing kit

Tools Required

Phillips screwdriver, straight slot screwdriver,

adjustable wrench, step ladder, and wire cutters.

Mounting Options

If there isn't an existing CUL listed mounting

box, then read the following instructions.

Disconnect the power by removing fuses or

turning off circuit breakers.

Secure the outlet box directly to the building

structure. Use appropriate fasteners and building

materials. The outlet box and its support must be

able to fully support the moving weight of the

fan (at least 50 lbs). Do not use plastic outlet

boxes.

Figures 1, 2 and 3 are examples of different

ways to mount the outlet box.

3. Installing Your Fan

Outlet box

Figure 1

Figure 2

Outlet box

To hang your fan where there is an existing

fixture but no ceiling joist, you may need an

installation hanger bar as shown in Figure 3

(available at your Hampton Bay Retailer).

Figure 3

Hanging the Fan

REMEMBER to turn off the power. Follow the

steps below to hang your fan properly:

Step 1. Secure the mounting bracket to the

ceiling outlet box using screws and lock washers

included with your outlet box. (Fig. 4)

Step 2. Lift fan into position by hanging the

motor assembly onto the hook from the ceiling

mounting bracket allowing it to hang freely.

(Fig. 5)

Step 3. Make the wire connections referring to

the section titled "Make the Electrical

Connections". You may hold the receiver

between the mounting bracket and top motor

assembly by hands for easy wire connections.

Outlet box

Mounting bracket

Figure 4

Figure 6

Figure 5

Fan

Installation of Safety

Support

An additional safety support is provided to

prevent the fan from falling. Secure the safety

cable to the ceiling joist with screw and washer,

as illustrated in Figure 6.

Safety Cable

Figure 8

White (neutral)

Green or bare

copper (ground)

White ("AC IN N")

White ("to motor N")

Ground

(green) (Connect to

ground wire on

mounting bracket

if no house

ground wire

exists.)

Outlet box

Black (hot)

Black ("AC IN L")

Black ("to motor L")

Receiver

Blue ("for light")

Blue (light)

Black (motor)

Fan

Make the Electrical

Connections

WARNING: To avoid possible electrical shock,

be sure electricity is turned off at the main fuse

box before wiring.

NOTE: This remote control unit is equipped

with 16 code combinations to prevent possible

interference from or to other remote units. The

frequency switches on your receiver and

transmitter have been preset at the factory.

Please recheck to make sure the switches on the

transmitter and the receiver are set to the same

position, any combination of settings will

operate the fan as long as the transmitter and

receiver are set to the same position. (Fig. 7)

Step 1. (Fig. 8) Motor to Receiver Electrical

Connections: Connect the black wire from the

fan to black wire marked "TO MOTOR L".

Connect the white wire from the fan to the

white wire marked "TO MOTOR N" from the

receiver. Connect the blue wire from the fan to

the blue wire marked "For Light" from the

receiver. Secure the wire connections with the

plastic wire nuts provided.

Step 2. (Fig. 8) Receiver to House Supply Wires

Electrical Connections: Connect the black (hot)

wire from the ceiling to the black wire marked

"AC in L" from the receiver. Connect the white

(neutral) wire from the ceiling to the white wire

marked "AC in N" from the Receiver. Secure the

wire connections with the plastic wire nuts

provided.

Step 3. (Fig. 8) If your outlet box has a ground

wire (green or bare copper) connect it to the fan

ground wires; otherwise connect the hanging

bracket ground wire to the mounting bracket.

Secure the wire connection with a plastic nut

provided.

After connecting the wires spread them apart so

that the green and white wires are on one side of

the outlet box and black and blue wires are on

the other side. Carefully tuck the wire

connections up into the outlet box.

Note: Fan must be installed at a maximum

distance of 20 feet from the transmitting unit for

proper signal transmission between the

transmitting unit and the fan's receiving unit.

Figure 7

Frequency

Finishing the Installation

Step 1. Place the receiver on the top motor

assembly, and tuck connections neatly on the top

motor assembly. (Fig. 9) Move the motor assembly

into position over the four studs and secure with

provided washers and nuts. (Fig. 10)

Step 2. Raise the motor housing up against the

mounting bracket, the four supports inside the

housing should be placed against the four studs on

the mounting bracket, twist the housing clockwise

until snug. (Fig. 11)

Motor

housing

Studs

Nuts

Washers

Receiver

Motor

assembly

Figure 10

Figure 9

Figure 11

Receiver

Attaching the Fan Blades

Step 1 Attach blades to blade arms using three

screws and rubber washers.(Fig. 12) Start a screw

into the blade arm, do not tighten. Repeat for the 2

remaining screws and washers.

Step 2 Tighten each screw securely starting with the

center screw. Make sure the blade is straight. Repeat

steps for the remaining blades.

Step 3 Fasten the blade arms to the motor by

inserting the tab from the blade arms to the slot in

the bottom motor housing, then tighten the two

screws and washers already installed in the blade

arms. (Fig. 13)

Figure 13

Figure 12

Motor

Blade arm

Slot

Tab

Rubber

washer

Blade

arm

Screws Blade

WARNING

TO REDUCE THE RISK OF PERSONAL

INJURY, DO NOT BEND THE BLADE

ARMS WHILE INSTALLING, BALANCING

THE BLADES, OR CLEANING THE FAN.

DO NO INSERT FOREIGN OBJECTS

BETWEEN ROTATING FAN BLADES.

Figure 14

Screws

Mounting plate

Mounting ring

Installing the Mounting

Plate

Step 1. Remove 1 of the 3 screws from the

mounting ring and loosen the other 2 screws.

(Do not remove)

Step 2. Place the key holes on the mounting

plate over the 2 screws previously loosened

from the mounting ring, turn mounting plate

until it locks in place at the narrow section of

the key holes. Secure by tightening the 2 screws

previously loosened and the one previously

removed. (Fig. 14)

This manual suits for next models

Table of contents

Other HAMPTON BAY Fan manuals

HAMPTON BAY

HAMPTON BAY Palm Beach II User manual

HAMPTON BAY

HAMPTON BAY Cassaro User manual

HAMPTON BAY

HAMPTON BAY METARIE II 24 User manual

HAMPTON BAY

HAMPTON BAY 68144 User manual

HAMPTON BAY

HAMPTON BAY SOUTHWIND 52371 User manual

HAMPTON BAY

HAMPTON BAY HAWKINS II Series User manual

HAMPTON BAY

HAMPTON BAY SUSSEX II AL694LED-BN User manual

HAMPTON BAY

HAMPTON BAY STONERIDGE 51823 User manual

HAMPTON BAY

HAMPTON BAY WELLSTON EF200B-44 User manual

HAMPTON BAY

HAMPTON BAY 26613 User manual

HAMPTON BAY

HAMPTON BAY WITHROP 656 413 User manual

HAMPTON BAY

HAMPTON BAY ESALA AK395-CB User manual

HAMPTON BAY

HAMPTON BAY Antigua Plus User manual

HAMPTON BAY

HAMPTON BAY AVERLY AK18B-BN User manual

HAMPTON BAY

HAMPTON BAY YG419-WH User manual

HAMPTON BAY

HAMPTON BAY AERATRON User manual

HAMPTON BAY

HAMPTON BAY Thorton User manual

HAMPTON BAY

HAMPTON BAY HALWIN AK396H-BN User manual

HAMPTON BAY

HAMPTON BAY AK404-BN User manual

HAMPTON BAY

HAMPTON BAY Florentine User manual

HAMPTON BAY

HAMPTON BAY 42010 User manual

HAMPTON BAY

HAMPTON BAY 91646 User manual

HAMPTON BAY

HAMPTON BAY TF-810S User manual

HAMPTON BAY

HAMPTON BAY HAWKINS YG204I-BN-D User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual