HAMPTON BAY Lynwood User manual

Lynwood

52 in Ceiling Fan

Owner’s Manual

Lynwood

Ventilador de Techo de 1,32 m

Manual del Propietario

848 729

150 mm

213 mm

The spot color is for reference proof only, please follow

pantone guide for actual color when printing.

This line is for die-cut position only

DO NOT PRINT IT!!!

Black Magenta Yellow Black PMS 465C PMS 5425C PMS 632C Die

Total Colors

Coating

Varnish

ADDITIONAL INFORMATION

V0.0

10-01-14

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

V0.0

17 Apr 09

1. UPC at 100% and without truncated.

2. The smallest fonts size is 6 points in the artwork.

File Name:

Artwork Version:

Customer:

Buyer:

Sold In Country:

Item Number:

Catergory:

MVendor:

Printing Type:

Translation Agency:

Size:

Blank Size:

Artist:

C.S.:

Date:

HD_014848A_848729_MC

V0.0

Home Depot

N/A

TBA

Ceiling Fan

KOF CLZ

Offest

TBA

213(L) x 150(W) mm

Owen

Chris Que

10-01-14

52” Lynwood

Ceiling Fan by Hampton Bay

Steeper Blade Pitch for

Greater Air Movement

3-Speed Reverse Function for

Year-Round Comfort and Savings

Accu-Arm™ for Accurate and

Easy Installation

Flush Mount Installation

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our

Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.

Please reference your SKU (848 729 oil-rubbed bronze)

or UPC (082392 369453 oil-rubbed bronze).

Thank you for purchasing this Hampton Bay ceiling

fan. This product has been manufactured with the

highest standards of safety and quality. The nish

of this fan is weather resistant, but over time will

naturally weather and fade.

Safety Rules .................................. 1

Unpacking Your Fan .................... 2

Installing Your Fan ...................... 3

Operating Your Fan ..................... 9

Care of Your Fan.......................... 10

Troubleshooting............................ 10

Specications ................................ 11

Warranty Information................. 12

Table of Contents

UL Model Number 52-LWD

Safety Rules .................................. 1

Unpacking Your Fan .................... 2

Installing Your Fan ...................... 3

Operating Your Fan ..................... 9

Care of Your Fan.......................... 10

Troubleshooting............................ 10

Specications ................................ 11

Warranty Information................. 12

To reduce the risk of electric shock, insure electricity1.

has been turned off at the circuit breaker or fuse box

before beginning.

All wiring must be in accordance with the National2.

Electrical Code ANSI/NFPA 70-1999 and local electrical

codes. Electrical installation should be performed by a

qualied licensed electrician.

WARNING:3. To reduce the risk of re or electric shock, do

not use this fan with any solid-state speed control device.

The outlet box and support structure must be securely4.

mounted and capable of reliably supporting a minimum of

35 pounds. Use only UL Listed outlet boxes marked “FOR

FAN SUPPORT.”

The fan must be mounted with a5. minimum of 7 feet

clearance from the trailing edge of the blades to the oor.

Do not operate reversing switch while fan blades are in6.

motion. Fan must be turned off and blades stopped before

reversing blade direction.

Avoid placing objects in path of the blades.7.

To avoid personal injury or damage to the fan and8.

other items, be cautious when working around or

cleaning the fan.

Do not use water or detergents when cleaning the fan or fan

blades. A dry dust cloth or lightly dampened cloth will be

suitable for most cleaning.

After making electrical connections, spliced conductors10.

should be turned upward and pushed carefully up into

outlet box. The wires should be spread apart with the

grounded conductor and the equipment-grounding

conductor on one side of the outlet box and ungrounded con-

ductor on the other side of the outlet box.

Electrical diagrams are for reference only. Light kits that are11.

not packed with the fan must be UL Listed and marked suit-

able for use with the model fan you are installing. Switches

must be UL General Use Switches. Refer to the instructions

packaged with the light kits and switches for proper assembly.

All set screws must be checked and retightened where neces-12.

sary before installation.

Safety Rules 1.

READ AND SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT FAN TO OUTLET BOX MARKED “ACCEPTABLE

FOR FAN SUPPORT” WITH THE SCREWS PROVIDED WITH THE

OUTLET BOX.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE BRACKETS (ALSO REFERRED TO AS “FLANGES”) DURING

ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN

THE PATH OF THE BLADES.

Blade Attachment Hardwarea.

(15 Screws)

Electrical Hardwareb.

(3 plastic wire connectors, 1 pull chain for

the fan, 1 pull chain for the light kit)

Locknut (3)c.

Extra Plastic Plug (for non-light use)d.

Extra Blade Bracket Hardwaree.

(1 screw and lockwasher)

Glass Bowl7.

Bulbs (2)8.

Mounting Bracket1.

Motor Housing2.

Fan Motor Assembly3.

Blades (5)4.

Light Kit Fitter5.

Blade Brackets (5)6.

2. Unpacking Your Fan

IMPORTANT: THIS PRODUCT AND/OR COMPONENTS ARE COVERED

BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,947,436;

5,988,580; 5,971,573; 6,010,306; 6,039,541; 6,046,416 AND OTHER

PATENTS PENDING.

Unpack your fan and check the contents. You should have the following items: Loose Parts Bag Containing:

Loose Parts Bag Containing:

Installing Your Fan 3.

Tools Required

Phillips screw driver, straight slot screw

driver, adjustable wrench, step ladder, and

wire cutters.

Mounting Options

If there isn’t an existing outlet box, then read

the following instructions. Disconnect the

power by removing fuses or turning off

circuit breakers.

Secure the outlet box directly to the building

structure. Use appropriate fasteners and

building materials. The outlet box and its

support must be able to fully support the

moving weight of the fan (at least 35 lbs.)

Do not use plastic outlet boxes.

Figures 1, 2, and 3 are examples of different

ways to mount the outlet box.

Outlet Box

To hang your fan where there is an existing

xture but no ceiling joist, you may need an

installation hanger bar as shown in Figure 3

(available at your Hampton Bay retailer).

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR PERSONAL INJURY, MOUNT

FAN ONLY TO AN OUTLET BOX MARKED

ACCEPTABLE FOR FAN SUPPORT AND

USE THE MOUNTING SCREWS PROVIDED

WITH THE OUTLET BOX. OUTLET BOXES

COMMONLY USED FOR THE SUPPORT OF

LIGHTING FIXTURES MAY NOT BE ACCEPT-

ABLE FOR FAN SUPPORT AND MAY NEED TO

BE REPLACED. CONSULT A QUALIFIED ELEC-

TRICIAN IF IN DOUBT.

Figure 1

Figure 2

Figure 3

Hanging the Fan

REMEMBER to turn off the pow-

er. Follow the steps below to hang your

fan properly.

Securely attach the mounting plate to1.

the outlet box using the two screws sup-

plied with the outlet box (Figure 4). Pull

the black, white and ground wires out of

the outlet box and through the hole in the

mounting plate and lay them to the side.

Carefully lift the fan motor assembly and2.

engage the slot in the motor bracket with

the hook on the mounting plate so that it

is securely suspended (Figure 5). Then

connect the wiring to your fan according

to the section “Making the Electrical Con-

nections”.

Once wiring is completed, lift the motor3.

bracket so that the threaded studs on the

mounting plate protrude through the slots

in the motor bracket (Figure 5). Securely

tighten the three 1/4” locknuts (supplied)

onto the threaded studs, then try to shake

the motor bracket to ensure that the assem-

bly is tight (Figure 6).

Fan Motor

1/4"Locknuts

(Supplied)(3)

Mounting

Plate

Switch Cup

Figure 4

Figure 5

Figure 6

FOR BETTER FAN PERFORMANCE, MAKE SURE

THE MOUNTING PLATE IS LEVEL. ADDITIONAL

WASHERS (NOT INCLUDED) MAY BE NEEDED

TO INSERT BETWEEN THE OUTLET BOX AND

MOUNTING PLATE (FIGURE 4).

Figure 7

Making the Electrical

Connections

REMEMBER to disconnect the power.

If you feel you do not have enough electrical

wiring knowledge or experience, have your fan

installed by a licensed electrician.

Follow the steps below to connect the fan

to your household wiring. Use the wire

connecting nuts supplied with your fan.

Secure the connectors with electrical tape.

Make sure there are no loose strands or

connections.

Connect the ground conductor of the 120v

supply (this may be a bare wire or a wire

with green colored insulation) to the green

ground leads from the motor bracket and the

mounting plate of the fan (Figure 7).

Connect the fan motor white wire to the

supply white (neutral) wire using a wire nut

supplied (Figure 7).

Connect the fan motor black and blue wires

to the supply black (hot) wire using a wire

nut supplied (Figure 7).

After connecting the wires, spread them

apart so that the green and white wires are

on one side of the outlet box and the black

wire is on the other side.

Turn the wire connecting nuts upward and

push the wiring into the outlet box.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE A SOLID STATE SPEED CONTROL

WITH THIS FAN. IT WILL PERMANENTLY DAMAGE THE ELECTRONIC CIRCUITRY.

CHECK TO SEE THAT ALL CONNECTIONS ARE TIGHT, INCLUDING GROUND, AND THAT NO BARE

WIRE IS VISIBLE AT THE WIRE NUTS, EXCEPT FOR THE GROUND WIRE.

ELECTRICAL DIAGRAMS ARE FOR REFERENCE ONLY. OPTIONAL USE OF ANY LIGHT KIT SHALL BE

UL LISTED AND MARKED SUITABLE FOR USE WITH THIS FAN.

Finishing the Fan

Installation

Remove the two screws on two diagonal1.

sides from the top of the mounting plate and

loosen the other two screws (Figure 8).

Align the two key slots on the top of the2.

motor housing with the two screws on the

mounting plate, push the motor housing up

and turn it clockwise to lock in plate, tighten

the two screws.

Install the two screws that were removed3.

in step 1 into the remaining two holes and

tighten rmly four screws.

Attaching the

Fan Blades

NOTE: Your fan blade are reversible. Select

the blade side nish which best accentuates

your decor.

Attach blade to blade bracket using the1.

screws supplied (Figure 9). Please note that

the rubber washers are pre-attached to the

blade bracket. Start a screw into the bracket.

Repeat for the two remaining screws.

Tighten each screw securely.2.

Fasten the blade assembly to the motor by3.

inserting the alignment posts into the slot

on the bottom of the motor and tightening

the motor screws. Please note that the mo-

tor screws are pre-attached into the blade

brackets (Figure 10).

Repeat steps 1-3 for the remaining blades.4.

Blade Balancing

All blades are grouped by weight. Because nat-

ural woods vary in density, the fan may wobble

even though the blades are weight matched.

The following procedure should correct most

fan wobble. Check after each step.

Check that all blade screws are secure.1.

Most fan wobble problems are caused when2.

blade levels are unequal. Check this level by

selecting a point on the ceiling above the tip

of one of the blades. Measure from a point

on the center of each blade to the point on

the ceiling. Measure this distance as shown

Figure 9

Figure 10

Figure 8

Figure 11

Figure 12

TO REDUCE THE RISK OF PERSONAL INJURY,

DO NOT BEND THE BLADE HOLDERS WHILE

INSTALLING, BALANCING THE BLADES, OR

CLEANING THE FAN. DO NOT INSERT FOREIGN

OBJECTS BETWEEN ROTATING BLADES.

Attaching the Light Kit

& Glass Bowl

CAUTION - To reduce the risk of electrical

shock, disconnect the electrical supply circuit

to the fan before installing the light xture.

Loosen the three serrated head screws on1.

the switch cup cover of the light kit tter

(Figure 12).

Connect the wires from the light kit tter 2.

to the wires from the switch cup of the fan

motor assembly by connecting the molded

adaptor plugs together (blue to black, white

to white). Carefully tuck all wires and splic-

es into the switch cup.

Align the three serrated head screws on the3.

switch cup cover of the light kit tter with

the three key slots in the switch cup. Make

sure the notch in the switch cup cover of the

light kit tter clears the reversing switch in

the switch cup. Position the light kit tter

on the switch cup and turn it clockwise un-

til it locks. Tighten the three serrated head

screws that were loosened in step 1 to se-

cure the light kit tter (Figure 12).

Remove the rubber washer, hex nut, bottom4.

cover and the nial from the light kit tter

(Figure 13).

With power off, install two 60 watt (maxi-5.

mum) candelabra base bulbs (included) into

the light kit tter sockets.

in Figure 11. Rotate the fan until the next

blade is positioned for measurement. Repeat

for each blade. Measurement deviations

should be within 1/8”. Run the fan for 10

minutes.

Use the enclosed Bladed Balancing Kit if3.

the blade wobble is still noticeable.

Position the glass bowl over the threaded6.

nipple and pass the fan switch chain through

the side hole in the glass bowl.

Re-install the rubber washer and hex nut7.

to the threaded nipple of the light kit t-

ter to secure the glass bowl properly.

DO NOT OVER TIGHTEN THE HEX

NUT, OVERTIGHTENING THE HEX

NUT MAY CAUSE THE GLASS TO

BREAK.

Re-install the bottom cover and nial and 8.

nger tighten the nial.

CAUTION - Be sure that the fan switch chain

does not make contact with the light bulbs.

YOUR FAN/SWITCH CUP COVER MAY NO

LOOK EXACTLY LIKE THE ILLUSTRATION.

HOWEVER, THE INSTALLATION IS THE SAME.

Figure 13

Figure 14

Fan Without Light Kit

In order to use the fan without the light kit,1.

remove the switch cup cover from the top

of the light kit tter by removing the center

hex nut inside the switch cup cover, and

then thread the switch cup cover out of the

threaded nipple on the top of the light kit

tter. Remove three serrated head screws.

Press the plastic plug (provided) into the2.

center hole of the switch cup cover.

Align the three screw holes in the switch3.

cup cover with the three key slots in the

switch cup. Make sure the notch in the

switch cup cover clears the reversing

switch in the switch cup (refer to Figure 12

on page 7).

Position the switch cup cover onto the4.

switch cup and install the three serrated

head screws that were removed in step 1.

Turn the switch cup cover clockwise until

it locks, tighten the three serrated head

screws.

This manual suits for next models

Table of contents

Other HAMPTON BAY Fan manuals

HAMPTON BAY

HAMPTON BAY HAVANA User manual

HAMPTON BAY

HAMPTON BAY 553-295 User manual

HAMPTON BAY

HAMPTON BAY CF556A-H26 User manual

HAMPTON BAY

HAMPTON BAY GLENDALE III AK488-MBK User manual

HAMPTON BAY

HAMPTON BAY YG204D-BN User manual

HAMPTON BAY

HAMPTON BAY SINCLAIR AL958-TB User manual

HAMPTON BAY

HAMPTON BAY WELLTON 60 AM588A-BN User manual

HAMPTON BAY

HAMPTON BAY TY-50-L (HD) User manual

HAMPTON BAY

HAMPTON BAY Capella AM113-BN User manual

HAMPTON BAY

HAMPTON BAY Trusseau User manual

HAMPTON BAY

HAMPTON BAY Landmark Plus User manual

HAMPTON BAY

HAMPTON BAY 7114-01 User manual

HAMPTON BAY

HAMPTON BAY EASTVALE User manual

HAMPTON BAY

HAMPTON BAY MINNA HE-12026 User manual

HAMPTON BAY

HAMPTON BAY HVW-30M User manual

HAMPTON BAY

HAMPTON BAY LEROY 37810 User manual

HAMPTON BAY

HAMPTON BAY Babiberre User manual

HAMPTON BAY

HAMPTON BAY TUCSON 51548 User manual

HAMPTON BAY

HAMPTON BAY MYRON 36LGM-L User manual

HAMPTON BAY

HAMPTON BAY 52869 User manual

HAMPTON BAY

HAMPTON BAY Gazebo II YG187-WH User manual

HAMPTON BAY

HAMPTON BAY 64183 User manual

HAMPTON BAY

HAMPTON BAY AL958B-BN User manual

HAMPTON BAY

HAMPTON BAY AM212-WH User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual