HAMPTON BAY Minorca User manual

52” Minorca

Ceiling Fan by Hampton Bay

Dual-Mount Installation

Aero-Breeze™ Technology

Moves up to 25% More Air

3-Speed Reverse Function for

Year-Round Comfort and Savings

Handheld Remote Control

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our

Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.

Please reference your SKU (916 010 brushed nickel)

or UPC (082392 512217 brushed nickel).

Thank you for purchasing this Hampton Bay ceiling

fan. This product has been manufactured with the

highest standards of safety and quality. The nish

of this fan is weather resistant, but over time will

naturally weather and fade.

Safety Rules ...............................................1

Unpacking Your Fan.................................2

Installing Your Fan ...................................3

Operating Your Fan ..................................9

Operating Your Remote Control .............10

Care of Your Fan.......................................11

Troubleshooting.........................................11

Specications .............................................12

Warranty Information..............................13

Table of Contents

UL Model Number: 52-MNC

1. To reduce the risk of electric shock, insure electricity

has been turned off at the circuit breaker or fuse box

before beginning.

2. All wiring must be in accordance with the National

Electrical Code ANSI/NFPA 70-1999 and local electrical

codes. Electrical installation should be performed by a

qualied licensed electrician.

3. WARNING: To reduce the risk of re or electric shock, do

not use this fan with any solid-state speed control device.

4. CAUTION: To reduce the risk of personal injury, use only

the screws provided with the outlet box.

5. The outlet box and support structure must be securely

mounted and capable of reliably supporting 35 lbs. (15.9

kg). Use only UL Listed outlet boxes marked “Acceptable

for Fan Support of 35 lbs. (15.9 kg) or less.”

6. The fan must be mounted with a minimum of 7 feet

clearance from the trailing edge of the blades to the oor.

7. Do not operate reversing switch while fan blades are in mo-

tion. Fan must be turned off and blades stopped before re-

versing blade direction.

8. Avoid placing objects in path of the blades.

9. To avoid personal injury or damage to the fan and

other items, be cautious when working around or

cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan

blades. A dry dust cloth or lightly dampened cloth will be

suitable for most cleaning.

11. After making electrical connections, spliced conductors

should be turned upward and pushed carefully up into

outlet box. The wires should be spread apart with the

grounded conductor and the equipment-grounding

conductor on one side of the outlet box, and the ungrounded

conductor on the other side of the outlet box.

12. Electrical diagrams are for reference only. Light kits that

are not packed with the fan must be UL Listed and marked

suitable for use with the model fan you are installing.

Switches must be UL General Use Switches. Refer to the

instructions packaged with the light kits and switches for

proper assembly.

13. All set screws must be checked and retightened where

necessary before installation.

Safety Rules 1.

READ AND SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF SHOCK. THIS FAN MUST BE INSTALLED

WITH AN ISOLATION WALL CONTROL/SWITCH.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT TO OUTLET BOX MARKED “ACCEPTABLE FOR FAN

SUPPORT OF 35LBS. (15.9 KG) OR LESS”, AND USE SCREWS PRO-

VIDED WITH THE OUTLET BOX.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING

THE BLADES, OR CLEANING THE FAN.

Blade Attachment Hardware

(15 Screws)

Mounting Hardware

(1 bolt, 1 clevis pin, 3 plastic wire

connectors)

Blade Bracket Attachment Hardware

(10 screws)

7. Blades (5)

8. Blade Bracket Set (5)

9. Glass Bowl

10. Hand unit/Receiver (Battery included)

11. Bulbs (6)

1. Mounting Plate (inside canopy)

2. Ball/Downrod Assembly

3. Canopy

4. Fan Motor Assembly

5. Light Kit with nial pre-attached

6. Decorative Glass Housing

2. Unpacking Your Fan

IMPORTANT: THIS PRODUCT AND/OR COMPONENTS ARE COVERED

BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,947,436;

5,988,580; 5,971,573; 6,010,306; 6,039,541; 6,046,416 AND OTHER

PATENTS PENDING.

Unpack your fan and check the contents. You should have the following items:

11 (2PCS)

(4PCS)

CAUTION: Changes or modications not expressly

approved by the party responsible for compliance

could void the user’s authority to operate the

equipment.

Installing Your Fan 3.

Tools Required

Phillips screw driver, straight slot screw

driver, adjustable wrench, step ladder, and

wire cutters.

Mounting Options

If there isn’t an existing outlet box, then read

the following instructions. Disconnect the

power by removing fuses or turning off

circuit breakers.

Secure the outlet box directly to the building

structure. Use appropriate fasteners and

building materials. The outlet box and its

support must be able to fully support the

moving weight of the fan (at least 35 lbs.)

Do not use plastic outlet boxes.

Figures 1, 2, and 3 are examples of different

ways to mount the outlet box.

Outlet Box

Note: You may need a longer downrod to

maintain proper blade clearance when install-

ing on a steep, sloped ceiling. The maximum

angle allowable is 30˚. If the canopy touches

downrod, remove the decorative canopy

bottom cover and turn the canopy 180˚ before

attaching the canopy to the mounting plate.

Outlet Box

To hang your fan where there is an existing

xture but no ceiling joist, you may need an

installation hanger bar as shown in Figure 4

(available at your Hampton Bay retailer).

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR PERSONAL INJURY, MOUNT TO

OUTLET BOX MARKED “ACCEPTABLE FOR FAN

SUPPORT OF 35LBS. (15.9 KG) OR LESS”, AND

USE SCREWS PROVIDED WITH THE OUTLET

BOX. OUTLET BOXES COMMONLY USED FOR

THE SUPPORT OF LIGHTING FIXTURES MAY

NOT BE ACCEPTABLE FOR FAN SUPPORT

AND MAY NEED TO BE REPLACED. CONSULT A

QUALIFIED ELECTRICIAN IF IN DOUBT.

Figure 1

Figure 2

Figure 4

Figure 3

IF YOU FEEL THAT YOU DO NOT HAVE

ENOUGH ELECTRICAL WIRING KNOWL-

EDGE OR EXPERIENCE, HAVE YOUR

FAN INSTALLED BY A LICENSED ELEC-

TRICIAN.

1. Remove the canopy ring from the canopy

by turning the ring to the right until it

unlocks (Figure 7).

2. Remove the mounting plate from the

canopy by loosening the four screws on

the top of the canopy. Remove the two

non-slotted screws and loosen the slotted

screws. This will enable you to remove the

mounting plate (Figure 8).

Turn Canopy Ring To Remove

Figure 7

Remove

Loosen But Do

Not Remove

Figure 8

Attaching the

Fan Blades

NOTE: Your fan blade are reversible. Select the

blade side nish which best accentuates your

decor.

1. Attach blade to blade bracket using the

screws supplied (Figure 5). Start a screw

into the bracket. Repeat for the two remain-

ing screws.

2. Tighten each screw securely.

3. Rotate the center ywheel until the blade

bracket screw holes in the center ywheel

are visible from the cut-out in the top light

kit plate (Figure 6).

4. Insert the blade/blade bracket assembly

through the hole in the side of the center

y wheel, align the two screws holes in

the blade bracket with the screw holes in

Figure 5

Blade Bracket

Screws

Blade

the center ywheel and secure with screws

supplied (Figure 6).

5. Repeat steps 1-4 for the remaining blades.

Screws

Cut-Out In The

Blade/Blade

Hole For Blade

Center

Top Light

Kit Plate

Bracket

Assembly

Bracket Insert

Flywheel

Figure 6

Hanging the Fan

REMEMBER to turn off the pow-

er. Follow the steps below to hang your

fan properly.

NOTE: This fan is recommended for the stan-

dard ceiling mounting using the downrod with

ball and socket mounting. When using stan-

dard ceiling installation, the distance from the

ceiling to the bottom of the fan blades will be

approximately 16 inches.

THE FAN MUST BE MOUNTED WITH A

MINIMUM OF 7 FEET CLEARANCE FROM

THE TRAILING EDGE OF THE BLADES

TO THE FLOOR.

4. Loosen, but do not remove, the set

screws on the collar on the top of the

motor housing.

5. Align the holes at the bottom of the

downrod with the holes in the collar

on top of the motor housing (Figure 9).

Carefully insert the bolt through the

holes in the collar and downrod. Be care-

ful not to jam the bolt against the wir-

ing inside the downrod. Insert the

clevis pin through the hole near the end

of the hanger pin until it snaps into its

locked position, as noted in the circle inset

of Figure 9.

6. Re-tighten the set screws on the collar on top

of the motor housing.

FAILURE TO PROPERLY INSTALL LOCKING PIN

AS NOTED IN STEP 5 COULD RESULT IN THE

FAN LOOSENING AND POSSIBLY FALLING.

Figure 10

Screws

And Rubber

Washers

Sockets

Bulbs

Reversing

Switch

3. Route the wires exiting the top of the fan

motor through the decorative glass housing.

Then route the wires through the canopy

ring and then the canopy. Continue by rout-

ing the wires through the ball/downrod as-

sembly (Figure 9).

Pin in

Position

Locked

Canopy

Motor Wires

Ring

Canopy

Decorative

Housing

Glass

Hanger Pin

Tighten

Screws Motor Collar

Locking

Downrod/Ball

Assembly

Figure 9

Installing the Top

Glass Housing

The glass housing is fragile, use care

when installing the fan.

1. Remove the two screws and rubber wash-

ers pre-installed on the top of the fan motor

assembly.

2. Carefully place the decorative glass housing

onto the fan motor assembly (Figure 10).

3. Align the two screw holes in the decorative

glass housing with the screw holes on the

top of the fan motor assembly and securing

with the screws and washers that were re-

moved in step 1.

4. Install 4 candelabra base bulbs (Max. 15

watts, provided) to the sockets on the fan

motor assembly.

120V Wires

Ceiling

Mounting

Plate

UL Listed

Outlet Box

Slide Mounting

PlateOver

ScrewHeads

Hook

Mounting Screws

(Supplied with

Outlet Box)

EACH WIRE NUT (WIRE CONNECTOR) SUP-

PLIED WITH THIS FAN IS DESIGNED TO ACCEPT

UP TO ONE 12 GAUGE HOUSE WIRE AND TWO

WIRES FROM THE FAN. IF YOU HAVE LARGER

THAN 12 GAUGE HOUSE WIRING OR MORE

THAN ONE HOUSE WIRE TO CONNECT TO THE

FAN WIRING, CONSULT AN ELECTRICIAN FOR

THE PROPER SIZE WIRE NUTS TO USE.

Installing Fan to

the Outlet Box

WHEN MOUNTING THE FAN ON A SLOPED

CEILING, THE STANDARD BALL/DOWNROD

MOUNTING METHOD MUST BE USED. MAKE

SURE THE MOUNTING BRACKET SLOTS ARE

ON THE LOWER SIDE BY SLIDING THE MOUNT-

ING BRACKET FROM THE TOP DOWN.

1. Pass the 120-volt supply wires through the

center hole in the ceiling mounting bracket

as shown in Figure 9.

2. Install the ceiling mounting plate on the

outlet box, sliding the mounting plate over

the two screws provided with the outlet box

(Figure 9). If necessary, use leveling wash-

ers (not included) between the mounting

plate and the outlet box. Note that the at

side of the mounting plate is to be toward

the outlet box.

3. Securely tighten the two mounting screws.

4. Carefully lift the fan assembly up to the ceil-

ing mounting plate. Make sure the tab on the

mounting plate socket is properly seated in

the groove in the hanger ball.

Making the Electrical

Connections

REMEMBER to disconnect the power. If

you feel you do not have enough electrical

wiring knowledge or experience, have your fan

installed by a licensed electrician.

Follow these steps to connect the fan and

receiver to your household wiring (or fol-

low the instructions included along

with the remote control). Use the wire

connection nuts supplied with your fan. Se-

cure the wire connection nuts with electrical

tape. Make sure there are no loose strands or

connections.

1. Connect the ground conductor of the 120v

supply (this may be a bare wire or a wire

with green colored insulation) to the green

ground lead(s) of the fan (Figure 11).

2. Connect the fan motor white wire to the

receiver white wire using a wire nut.

3. Connect the fan motor black wire to the

receiver black wire using a wire nut.

4. Connect the fan motor blue wire to the

receiver blue wire using a wire nut.

5. Connect the receiver red wire to the supply

black (hot) wire using a wire nut.

ELECTRICAL DIAGRAMS ARE FOR REFERENCE

ONLY. OPTIONAL USE OF ANY LIGHT KIT SHALL

BE UL LISTED AND MARKED SUITABLE FOR

USE WITH THIS FAN.

6. Connect the receiver white wire to the sup-

ply white wire (neutral) wire using a wire

nut.

7. After connecting the wires, spread them

apart so that the green and white wires are

on one side of the outlet box and the black

wire is on the other side.

8. Turn the wire connecting nuts upward and

push the wiring into the outlet box.

Figure 11

WHITE

BLACK

BLUE

BLACK WHITE

WHITE

Outlet

Box

Grounding

Green

Lead

Ground

Downrod

SUPPLY CIRCUIT

Receiver

WHITE

RED

WHITE

BLACK

BLUE

WHITE

BLACK

BLUE

Finishing the Fan

Installation

1. Align the four screw holes in the canopy

with the four screw holes in the mounting

plate.

2. Secure the canopy in place by using the four

mounting screws that were removed in step

2 as described on page 4.

3. You may now proceed to install the decora-

tive support rods.

Installing the Light

Kit/ Glass Shade

REMEMBER to disconnect the power.

THE GLASS IS FRAGILE, USE CARE

WHEN INSTALLING THE LIGHT KIT AND

THE GLASS SHADE.

1. Remove the three mounting screws on the

light kit switch cup.

2. Connect the wires exiting the light kit brack-

et below the fan motor with the wires from

the light kit switch cup, black to blue and

white to white (Figure 12).

3. Carefully push all the wires into the light kit

switch cup.

NOTE: ALLOW THE BULBS TO COOL

COMPLETELY BEFORE TOUCHING OR

REPLACING THE BULBS TO AVOID ACCI-

DENTAL BURNING OF THE SKIN.

DO NOT OVERTIGHTEN THE FINIAL,

OVERTIGHTENING THE FINIAL MAY

CAUSE THE GLASS TO BREAK.

4. Slide the light kit switch cup and secure it to

the light kit bracket using the three screws

removed in step 1.

5. Remove the nial, hex nut and rubber wash-

er on the bottom of the light kit assembly.

6. With the power off, insert the light bulbs

into the light kit sockets, Max. 60 watt can-

delabra base bulbs provided.

7. Raise the glass shade up against the light

plate of the fan motor assembly. Place the

rubber washer and then the hex nut removed

in step 5. Firmly tighten the hex nut to hold

the glass bowl in place (Figure 12).

8. Re-install and nger tighten the nial.

OVER LAMPING THE FAN WILL RESULT IN

THE FAN LIGHTS SHUTTING DOWN UNTIL THE

PROPER WATTAGE OF BULBS ARE INSTALLED.

RESET THE LIGHTS BY TURNING OFF, RE-

PLACE BULBS WITH THE CORRECT WATTAGE

BULBS,TURN POWER ON.

Figure 13

Figure 12

Blade Balancing

All blades are grouped by weight. Because nat-

ural woods vary in density, the fan may wobble

even though the blades are weight matched. The

following procedure should correct most fan

wobble. Check after each step.

1. Check that all blade and blade bracket

screws are secure.

2. Most fan wobble problems are caused when

blade levels are unequal. Check this level by

selecting a point on the ceiling above the tip

of one of the blades. Measure from a point

on the center of each blade to the point on the

ceiling. Measure this distance as shown in

Figure 13. Rotate the fan until the next blade

is positioned for measurement. Repeat for

each blade. Measurement deviations should

within 1/8”. Run the fan for 10 minutes.

3. If the fan continues to wobble please contact

Customer Service and a balacing kit will be

sent to you at no charge.

TO REDUCE THE RISK OF PERSONAL INJURY,

DO NOT BEND THE BLADE HOLDERS WHILE

INSTALLING, BALANCING THE BLADES, OR

CLEANING THE FAN. DO NOT INSERT FOREIGN

OBJECTS BETWEEN ROTATING BLADES.

Sockets

Mounting

Bulbs

Finial

Glass Shade

Screws

White

Light Kit

Switch

Cup

Blue

Black

Light Kit

Bracket

Rubber Washer

Hex Nut

Table of contents

Languages:

Other HAMPTON BAY Fan manuals

HAMPTON BAY

HAMPTON BAY 284-485 User manual

HAMPTON BAY

HAMPTON BAY Lodge 285 313 User manual

HAMPTON BAY

HAMPTON BAY Cherokee 565 332 User manual

HAMPTON BAY

HAMPTON BAY 1002 498 557 User manual

HAMPTON BAY

HAMPTON BAY YG188-NI User manual

HAMPTON BAY

HAMPTON BAY LYNDHURST 51015 User manual

HAMPTON BAY

HAMPTON BAY Burgess 176015 User manual

HAMPTON BAY

HAMPTON BAY YG204D-BN User manual

HAMPTON BAY

HAMPTON BAY HALPERT 52169 User manual

HAMPTON BAY

HAMPTON BAY ASHBURTON YG593-BN User manual

HAMPTON BAY

HAMPTON BAY Clarington 503 837 User manual

HAMPTON BAY

HAMPTON BAY STONERIDGE EF600K-52 User manual

HAMPTON BAY

HAMPTON BAY Algiers 672 099 User manual

HAMPTON BAY

HAMPTON BAY Larson User manual

HAMPTON BAY

HAMPTON BAY AG524-WH User manual

HAMPTON BAY

HAMPTON BAY 24816-021 User manual

HAMPTON BAY

HAMPTON BAY HAWKINS YG204I-BN-D User manual

HAMPTON BAY

HAMPTON BAY FC120-CARL User manual

HAMPTON BAY

HAMPTON BAY Altura User manual

HAMPTON BAY

HAMPTON BAY PT13-13D-1 User manual

HAMPTON BAY

HAMPTON BAY 1002 275 335 User manual

HAMPTON BAY

HAMPTON BAY 51315 User manual

HAMPTON BAY

HAMPTON BAY ST. DAVID 91344 User manual

HAMPTON BAY

HAMPTON BAY Springview User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual