HAMPTON BAY BAXTER User manual

Hampton Bay Lifetime Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material

present at time of shipment from the factory for a lifetime after the date of purchase by the

original purchaser. The retailer also warrants that all other fan parts, excluding any glass or

plexiglass blades, to be free from defects in workmanship and material at the time of

shipment from the factory for a period of one year after the date of purchase by the original

purchaser. We agree to correct such defects without charge or at our option replace with a

comparable or superior model if the product is returned to the retailer. To obtain warranty

service, you must present a copy of the receipt as proof of purchase. All costs of removing

and reinstalling the product are your responsibility. Damage to any part such as by accident

or misuse or improper installation or by affixing any accessories, is not covered by this

warranty. Because of varyingclimatic conditions inthe United States this warranty does not

cover any changesin brass finish, including rusting, pitting, corroding, tarnishing orpeeling.

Brass finishes of this type give their longest useful life when protectedfrom varying weather

conditions. A certain amount of wobble is normal and should not be considered a defect.

Servicing performed by unauthorized persons shallrender the warranty invalid. There is no

other express warranty. The retailer hereby disclaims any and all warranties,

including but not limited to. Those of merchantability and fitness for a particular

purpose to the extent permitted by law. The duration of any implied warranty which

cannot be disclaimedis limited to the time period as specified inthe express warranty. Some

states do not allow limitation on how long an implied warranty lasts, so the above limitation

may not apply to you. The retailer shall not be liable for incidental, consequential, or

special damages arising out of or in connection with product use or performance except

as may otherwise be accorded by law. Some states do not allow theexclusion of incidental

or consequential damages, so the above exclusion or limitation may not apply to you. This

warranty gives specific legal rights, and you may also have other rights which vary from

state to state. This warranty supersedes all priorwarranties.

Lifetime Limited Warranty

Date Purchased

Store Purchased

Model No.

Serial No.

Vendor No.

UPC

864-766

219032

792145351573

Safety Rules.....................................................................................................................................

Unpacking Your Fan .........................................................................................................................

Installing Your Fan ...........................................................................................................................

.....................................................................................................................

................................................................................................................

Care of Your Fan ............................................................................................................................

Troubleshooting .............................................................................................................................

Specifications ................................................................................................................................

Installing the Light Kit

Operating the Transmitter

11.

12.

13.

14.

15.

Table of Contents

1. Safety Rules

1. To reduce the risk of electric shock, insure electricity has been

turned off at the circuitbreaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical

Code and local electrical codes. Electrical installation should be

performed by aqualified licensed electrician.

3. WARNING: To reduce the risk of electrical shock and fire, do

not use thisfan with anysolid-state fan speed control device.

4. WARNING: To reduce the risk of fire, electric shock, or personal

injury, mount to outlet box marked "Acceptable for Fan

Support of 22.7 kg (50 lbs.) Or Less" and use mounting screws

provided with the outlet box. Most outlet boxes commonly used

for the support of light fixtures are not acceptable for fan support

and may need to be replaced. Due to the complexity of the

installation of this fan, a qualified licensed electrician is strongly

recommended.

8. Avoid placing objects in the pathof the blades.

9. Do not operate the reverse switch while the fan blades are in motion.

The fan must be turned off and the blades stopped before reversing

the blades direction.

10. To avoid personal injury or damage to the fan and other items, be

cautious when workingaround or cleaningthe fan.

11. Do not usewater or detergents when cleaningthe fan or fan blades.

A dry dust cloth or lightly dampened cloth will be suitable for

most cleaning.

12. After making electrical connections, spliced conductors should

be turned upward and pushed carefully up into the outlet box. The

wires should be spread apart with the grounded conductor and the

equipment-grounding conductor onone side of the outlet box.

13. Electrical diagrams are for reference only. Light kits that are not

packed with the fan must be UL Listed and marked suitable for

use with the model fan you are installing. Switches must be UL

General Use Switches. Refer to the Instructions packaged with

the light kitsand switches forproper assembly.

WARNING

TO REDUCETHE RISK OFFIRE, ELECTRIC SHOCKOR PERSONAL

INJURY, MOUNT FAN TO OUTLET BOX MARKEDACCEPTABLE FOR

FAN SUPPORT.

5. The outlet box and support structure must be securely mounted

and capable ofreliably supporting a minimum of 50pounds. Use

only ULListed outlet boxes marked FOR FAN SUPPORT.

6. The fan must be mounted with a minimum of 7 feet clearance

from the trailingedge of theblades to the floor.

7. WARNING: Use only with light kit marked "Suitable for Use in

Wet Locations"

WARNING

TO REDUCETHE RISK OFPERSONAL INJURY, DO NOTBEND THE

BLADE ARMS(ALSO REFERRED TO AS BRACKETS) DURING

ASSEMBLYOR AFTERINSTALLATION. DO NOTINSERT OBJECTS IN

THE PATHOF THE BLADES.

NOTE

READ AND SAVE ALLINSTRUCTIONS!

Unpacking Your Fan 2.

WARNING

DO NOT INSTALL ORUSE FAN

IF ANYPARTIS DAMAGED ORMISSING.

CALL TOLLFREE 1-877-902-5588

Unpack your fanand check the contents. You should havethe following items;

1. Fan blades (5)

2. Canopy assembly

5. Fan motorassembly

Blade arms (5)

7. Mounting plate

Ball/downrod assembly

Coupling cover

8. Light kit

14. Loose partsbag containing:

a. Blade attachmenthardware

b. Mounting hardware

( 3 plasticwire connectors)

(Decorative cover)

(16 screws )

. Light kithardware

9. Glass shade

10. 40 Wattcandelabra bulbs (3)

11. Receiver with 6wire nuts

wire nuts

13. Balancing kit

12a. Wall transmitter incl.2 mounting screws

and 3

12b. Wall plate w/2mounting screws

12b

12a

3. Installing Your Fan

Tools Required

Phillips screwdriver, straight slot

screwdriver, adjustablewrench, step ladder,

and wire cutters.

Mounting Options

Heavy duty ceiling fan rated outlet box is

required (at least 50 lbs). Donot use regular

outlet box (metalor plastic).

Figure 1,2 and 3 are examples of different

ways to mountthe outlet box.

Note: You may need a longer downrod to

maintain proper blade clearance when

installing on asteep, sloped ceiling.

Heavy duty fan brace

Provide strong

support

Recessed

outlet box

Mounting bracket

opening must be

toward the top

Figure 3

Figure 2

Heavy duty

outlet box for fan

Heavy duty

outlet box for fan

Figure 1

Angled ceiling

maximum

18 angle

Hanging the Fan

REMEMBER to turn off the power. Follow

the steps below to hang your fan properly:

Step 1. Remove the decorative canopy bottom

cover from the canopy by turning the cover

counter clockwise. (Fig.4)

Step 2. Remove the hanger bracket from the

canopy by loosening the two screws on the

bottom of the hanging bracket a half turn from

the screw head and turning the canopy counter

clockwise. (Figure 4)

Step 3. Remove the hanger pin, lock pin and

set screws from the top of the motor assembly.

(Fig. 5)

Step 4. Route wires exiting from the top of the

fan motor through the collar cover, canopy

cover, canopy and then through the ball /

downrod. (Fig. 5)

Step 5. Align the holes at the bottom of the

downrod with the holes in the collar on top of

the motor housing (Fig.5). Carefully insert the

hanger pin through the holes in the collar and

downrod. Be careful not to jam the pin against

the wiring inside the downrod. Insert the

locking

CAUTION

Remove the 3 motor support plate, discard the

motor support plate.

Step 6. Tighten two set screws on top of the fan

motor firmly (Figure 5)

Step 7. Install the hanger bracket to the outlet

box; be sure to align the holes in the hanger

bracket with the post holes in the outlet box and

secure with screws and washers provided by the

outlet box.(Figure 6)

Step 8. Hanging the assembled fan onto the

mounting bracket, place the downrod ball into

the mounting bracket. Rotate fan until the slot

of the downrod ball locks into the tab of the

mounting bracket. (Figure 7)

Step 9. Secure the safety cable to the building

structure as shown in Fig.7

Step 10. Connecting the wires (see making the

electrical connections)

WARNING

FAILURETO PROPERLY INSTALL LOCKING

PIN ASNOTED IN STEP5 COULD RESULT IN

FAN LOOSENINGAND POSSIBLY FALLING.

pin through the hole near the end of the hanger

pin until it snaps into its locked position, as

noted in the circle inset of Fig. 5.

Figure 4

Hanger

bracket

Ceiling

canopy

Canopy

cover

Figure 5

Motor wires

Ball/downrod

assembly

Hanger pin Locking pin

Collar cover

Downrod

Canopy

Canopy cover

Set screws

Make the Electric Connections

WARNING: To avoid possible electrical

shock, be sure electricity is turned off at the

main fuse boxbefore wiring.

NOTE: This remote control unit is equipped

with 16 code combinations to prevent

possible interference from or to other remote

units. The frequency switches on your

receiver and transmitter have been preset at

the factory. Please recheck to make sure the

switches on the transmitter and the receiver

are set to the same position, any

combination of settings will operate the fan

as long as the transmitter and receiver are set

to the sameposition.(Figure 8)

Step 1. (Figure 9) Insert the receiver into

the mounting bracket with the flat side of

the receiver facingthe ceiling.

Step 2. (Fig. 10) Motor to ReceiverElectrical

Connections: Connect the Black wire from

the fan toBlack wire marked"TO MOTOR L".

Connect the White wire from the fan to

the White wire marked "TO MOTOR N" from

the receiver. Connect the Blue wire from the

fan to the Blue wire marked "For Light" from

the receiver. Secure wire connections with

the plastic wirenuts provided.

Step 3. (Figure 10) Receiver to House Supply

Wires Electrical Connections: Connect the

black (hot) wire from the ceiling to the black

wire marked "AC in L" from the receiver.

Connect the white(neutral) wire from the

ceiling to thewhite wire marked "AC in N"from

the receiver. Secure the wire connections with

the plastic wirenuts provided.

Step 4. (Figure 10) If your outlet box has a

ground wire (green or bare copper) connect it to

the fan ground wires; otherwise connect the

hanging bracket ground wire to the mounting

bracket. Secure the wire connection with a

plastic nut provided.After connecting the wires

spread them apart so that the green and white

wires are on one side of the outlet box and black

and blue wires are on the other side. Carefully

tuck the wireconnections up intothe outlet box.

CAUTION: Do not use with wall light

dimmer switch. (Fig.9a)

Figure 8

ONON

Code switch

Screws provided

by the outletbox

Hook

UL Listed

electrial

box

Figure 6

AC Wires

Washers

Hanger

bracket

Posts in the

outlet box

Figure 7

Hanger

bracket Safety cable

Figure 10

White (neutral)

Green or bare

copper (ground)

White ("AC INN")

White ("to motor N")

Ground

(green)

(Connect to

ground wire on

hanger bracket

if no house

ground wire

exists.)

Outlet box

Black (hot)

Black ("AC INL")

Black ("to motor L")

Receiver

Blue ("for light")

Blue (light)

Black (motor)

Fan

SUPPLYCIRCUIT

Figure 9

Figure 9a

Receiver

Hanger

bracket

OFF

MAX

This manual suits for next models

Table of contents

Other HAMPTON BAY Fan manuals

HAMPTON BAY

HAMPTON BAY 52869 User manual

HAMPTON BAY

HAMPTON BAY BPT12-13D User manual

HAMPTON BAY

HAMPTON BAY Gazebo II Plus User manual

HAMPTON BAY

HAMPTON BAY Principle User manual

HAMPTON BAY

HAMPTON BAY Copperhead User manual

HAMPTON BAY

HAMPTON BAY HALPERT 52169 User manual

HAMPTON BAY

HAMPTON BAY Asbury Plus User manual

HAMPTON BAY

HAMPTON BAY 460-952 User manual

HAMPTON BAY

HAMPTON BAY WITHROP 656 413 User manual

HAMPTON BAY

HAMPTON BAY AVERLY AK18B-BN User manual

HAMPTON BAY

HAMPTON BAY ROTHLEY 51563 User manual

HAMPTON BAY

HAMPTON BAY Florentine User manual

HAMPTON BAY

HAMPTON BAY CF556A-H26 User manual

HAMPTON BAY

HAMPTON BAY 7114-01 User manual

HAMPTON BAY

HAMPTON BAY Burgess 640-657 User manual

HAMPTON BAY

HAMPTON BAY LOOMIS YG990-MBK User manual

HAMPTON BAY

HAMPTON BAY AK404-BN User manual

HAMPTON BAY

HAMPTON BAY 52-RMG User manual

HAMPTON BAY

HAMPTON BAY SEAPORT AL634-WH User manual

HAMPTON BAY

HAMPTON BAY Tipton II 52" User manual

HAMPTON BAY

HAMPTON BAY FC120-CARL User manual

HAMPTON BAY

HAMPTON BAY ASHBURTON YG593-TB User manual

HAMPTON BAY

HAMPTON BAY WELLTON AM588-BN User manual

HAMPTON BAY

HAMPTON BAY Carlsbad User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual