Haier XQS52-78 User manual

The ventilation

holes at thebottom

Before Using

Safety precautions

In case the washing machine is installed on ground

with carpet, be careful not to block the ventilation hole

with carpet.

Do not put the machine at damp place like the

bathroom. Never wash it with water. Do not

put wet laundries on the control panel coating.

Do not let the machine share one receptacle with other

electric appliances. If the power plug is damaged, or

the plugging into the receptacle is loose, do not use

the plug any more.

Do not wash water-proof laundry like the raincoat,

bikecovers, down textiles etc. To avoid abnormal

vibrations in spinning and damages to the laundries.

Do not bend, stretch, twist, bind the power cord by force, or reformit.

Do not press or clamp it with heavy items. If the power cord and power

plug are bad, or the receptacle is loose, be sure to have it replaced by

the technicians of our special shop or our agent,or the after-sales service

department to avoid any risk.Keep the prong of the power plug clean.If

dust is found on the power plug, please wipe it off with dry cloth.

In normal usage of the washing machine, the power

plug shall be ready to be pulled or plugged with hang.

Be sure to pull the plug off and close the water faucet

when occurring power failure,delivering the maching,

setting the machine idle or cleaning the machine,Do

not plug or pull the power plug with wet hand.

earth

Do not use water with temperature higher than 50

Please plug the plug on special 220V AC receptacle.

Be sure to use three phase power receptacle.Ensure

the earthing prong of the power redeptacle is earth-

ed reliably.Use leakage protector if possible.

Soft object

Do not put hand into the rotating tub.It is dangerous

even if the rotation speed is slow. Take special care of

the children. Keep children away from the washing

machine to avoid them climbing on.

Do not decompose, repair or alter the machine by

yourself.

Do not put any hot or heavy items (such as the

kettle with hot water) on the washing machine.

Do not wash laundry with volatile materials

(such as thinner, petrol etc.).

Keep the machine away from direct sunlight and

heat source like the heater.

The handicapped or children without care shall not

use the machine.

Please keep the lint filter in good condition, and

install it to proper position during washing. If the

lint filter is lost or damaged,please contact the local

after-sales service department of our company.

Benzene

Before Using

Safety precautions

To protect your laundries and washing machine,

please take out all of the coins, buttons, sand, hairpin

and other foreign materials before washing.

Please check if the water faucet is open, and if the

connection of the water inlet pipe is proper.

It is suggested to use foamless washing powder.

Install the bottom plate and lint filter

Please install and adjust the machine according to the requirement of the mannual.

It is very important to your security and correct operating the machine.

Before Using

Installation and adjustment

After opening the package, please lean the washing

machine gently down on soft items (like towel cloth,

blanket, etc.). Installthe bottom plate to the bottom of

the machine with eight screwsby a cross screwdriver,

then lift the machine up gently. See to the figure:

1.Open the top lid of the washing machine.

2.Put the inner cover component on the outer tub cover, aimingthe inner cover

shaft to the installation hole of the correspondingouter tub cover shaft groove.

3.Firstly insert the inner cover shaft of one side into the correspon-ding outer tub

cover shaft groove, then push the another inner cover shaft into the corresponding outer

tub cover shaft groove. Please install to designated position to guarantee there are no

dropping or abnormal sound in opening and closing of the inner cover, and the operation

shall be smooth. Do not dismount the inner cover component after washing.

Install the lint filter

Install the inner cover

Install the lint filter in the balance ring.

I part zoom in

Press this part

Screw

Back

Front

bottom plate Soft object

Outer tube cover

Inner cover shaft

Inner cover

The drainage shall be smooth with the drain hose.

The height of the drain hose shall be less than

10cm, or the drainage will not be smooth, and cost

such long time that the machine may stop at mid

way.

Do not step on or press the drain hose.

If extra drain hose is needed, please make separate

purchase. The inner diameter of the extra hose shall

not less than 30mm, and the length shall not exceed

1.5m.

If the extra hose is too long,cut

it either at A or at B point.

<10cm

> 30mm

<1.5m

If the drain hose is too long, cut it at mid point. To make

smooth drainage, cut the front end of the hose slantingly.

Useage the drain hose

Before Using

The largest allowable slope of the shank base of the machine is 1 .The slanting or rough ground will result in

unstable running or stoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal:

Hang the lead line to check if it is

horizontal.

Adjust the adjustable leg:

Adjust the Installation position

FastenLoosen

High Low

the adjustable nut

the adjustable feet

1 .To twist the adjustable leg, please first lift up the

side of the leg slightly, loosen the adjustable nut,

and twist the leg.

2 .After adjustment, fastenthe nut.

The exit end face of the faucet

Confirm the water faucet

Connection between the water inlet hose jointer and the water faucet

water faucet, suitable water faucet, not suitable

It is required that the front end shall be longer than 10cm.

The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage.

2 Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet.

See to Figure 2. (If the faucet is too large and the jointer can not be set on the water faucet, please loosen

the four screws and take out the bushing in the jointer. The front end of the faucet must be smooth,

otherwise it may leak water. See to Figure 3.)

1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the

water inlet hose component. See to Figure 1.

3.Fasten the four screws evenly. See to Figure 4.

About 4mm before twisting

remark: Before installation, the threading is 4mmabove the upper surface of the nut.

After installation, the threading is 2mm above the upper surface of the nut..(see to figure 6)

About less than 2mm after twisting

water inlet hose jointer

Screw knife

Screw

Bushing

Sign plate

Screw nut

water inlet hose

Figure 1

Figure 4

Figure 2

Figure 5

Figure 3

Figure 6

Slider

Lock level

Before Using

Install the water inlet hose

4 Take off the nameplate. Twist the fastening nut as per the indication of the figure

to seal up the exit end face of the faucet. See to Figure 5.

Connection between the water inlet hose and the washer

Dismantle the water inlet hose

Connection between the jointer of the water inlet hose

and the water inlet hose

Check the connection between the jointer of the water inlet hose

and the water faucet

1.Do not take off the water absorption cushion. Please check if the

cushion is dropped or damaged before each usage. If it happens

please contact our after-sale department immediately.

1.Swing the hose gently to confirm if it is fastened stable.

2.After installation, open the faucet to check if it leaks.

3.Do not bend the hose with overstrain.

1.Push down the slider. Insert the water inlet hose into the jointer.

2 Hang the lock lever to the jointer. Release the slider till a click

sound is heard.

Locking level

Slider

water absorption

cushion.

nut of thewater

inlet hose

the jointer of the

water inlet hose

Slider

Locking level

jointer of the

water inlet valve

1. Close the water faucet.

2. Press the locking lever. Push down the slider. Then pull of the water inlet

hose.

If the machine is used frequently, the jointer of the water inlet hose can be

kept

on the faucet to prevent damaging the fixing screw.

Before Using

2 Put the nut of the water inlet hose on the valve jointer.

3 Fasten the nut. Swing it gently to confirm if it's suitable.

4.Before each usage please check if the connection

between the jointer of the water inlet hose and the

water faucet, and the installation of the water inlet

hose are firm, so as to prevent dropping from

improper installation position.

Using process

1 Preparation before washing

Confirm if there's

special requirement

for the laundries.

Clear the pocket.

Take out the coins ,

sand,hairpins etc.

Fasten the buttons

and zippers.

When the pulsator is

running ,the buttons of

the laundries may cause

noise. For the sake of

discretion ,please put

the laundries with

buttons into other

laundries.

Preparation before washing

The quantity of the

laundries shall not

exceed the rated

value. The big

laundries like the

jeans shall be put

in loosely.

Pay attention to followings before washing the laundries

1.Connect the water inlet hose.

2.Confirm that the washing machine is earthed

reliably . Then insert the power plug into the

receptacle. Do not connect the earth terminal

to the gas pipe and tap water pipe.

3.Put down the drain hose.

a. Check if the laundries are applicable for washing with machine.

b. Divide the laundries with unfast color from other laundries.

c. Put those laundries difficult to absorb water into water with hand.

d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,

please apply detergent in advance, which can make it easier to remove the soil.

e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.

f. Do not put those laundries polluted by chemicals directly into the washing machine.

For those small laundries and those may get twisting or worn, and woolen/fur laundries, please put them into

mesh bag for washing.

Reference weight of the laundries:

working suit up,down

jeans about 800g

The capacity of washing of the machine refer to

the largest weight of the standard laundries under

dry condition that can be washed in one time.

Laundries quantity in one washing cycle shall

be lower than the rated capacity. The largest

capacity of this machine is 5.2kg.

The thickness ,size , type of the cloth will influence

the actual washing capacity. It is suitable to put in

reasonable amount of laundries and the laundries

can be turned round in washing for one time

washing.

Do not select " 4" water level for laundries

less than 1.0kg ,so as to avoid splashing of water.

shirt jacket

single bed sheet

socking

underpants

undershirt

pajamas

blanket

cotton,about 900g

cotton,about

300g

cotton,about

800g

cotton,about 600g

blending,about 50g

cotton,about 70g

cotton,about 180g

about 200g

Using process

2 Put in the laundries

cotton,about 1120g

coat with blended

cloth (about 800g)

How to use the whitener

Standard usage of the detergent and water quantity

Laundries

quantity

(kg)

Water

level

Water

quantity

Common powder,

Put the washing powder and softener into the detergent box

directly as Indicated in the left figure.

After that, please close the detergent box.Refer to the following

list for the usage of the detergent :he standard dosage of the

detergent and the water quantity.

How to use the washing powder

Fill water to decided level .Dilute the whitener with

container. Pour it slowly into the washing tub.

Concentrated powder,

Add 40g in each 30L water

Add 25g in each 30L water

3 Put in the detergent Using process

Using process

Avoid using whitener on laundries with colour or

pattern as they are prone to lose colour.

The whitener shall not touch the laundries directly.

Refer to the user's manual for the usage and

quantity of the whitener.

For powder whitener, please dissolve it before use.

Below 0.5

About 50L

About 45L About 60g About 37g

About 38L About 51g About 32g

About 28L About 37g About 23g

About 20L About 27g About 17g

About 47L

About 42L About 56g About 35g

About 32L About 43g About 27g

About 24L About 32g About 20g

About 16L About 21g About 13g

About 67g About 42g

About 63g About 39g

Access for detergent and washing powder

Access for softerner

Directly dissolved in the machine (not applicable for fuzzy

program and reserve wash)

1.Fill small quantity of water.

2.Add the power.Run for 30 seconds to dissolve it completely.

3.Put in the laundry. Select suitable water level.

The instant dissolving of the washing powder:

1.Prepare warm water of 30 and a container.

2.Add the powder while stirring to fully dissolve it.In selecting

The super quick program, it is suggestedto adopt liquid

detergent instead of washing powder to guarantee the

washing effect.

The powder is more prone to pollute the laundry than the

detergent. Therefore please use it with suitable quantity.

It is suggested not to use high sudsing detergent.

Washing powder with poor quality or long time storage

maybe caked. Please pay attention to cleaning the

detergent box in time.

Detergent box

4 Use the operation buttons

Using process

Description of the function of buttons

Mode and meaning of the indicators

Flashing: indicate the running program

On: indicate the program about to run, or indicate the selected mode

Digital tube

During sensing, it displays

During operation of programs, it displays theremained time

(minute) or remained times of the corresponding procedure

Push the soak button to set the

soak procedure.

During standard and jeans

programs, push the soak

button to set different soak time

(10, 20, 30, 40 minutes)

During chemical fiber and

cotton programs, push the

soak button to select soak

procedure, but the soak time

cannot change.

During quick , super quick,

wool and silk programs, push

the soak button, the machine

have no reaction.

Soak button Wash button

Push the wash button to set

the wash procedure.

During standard and jeans

programs, push the wash

button to set different wash

time (from 0 to 16minutes)

During chemical fiber , cotton

wool and silk programs, push

the wash button to select

wash procedure, but the wash

time cannot change.

During quick, super quick,

programs, push the wash

button the machine have no

reaction.

Rinse button

Push the rinse button to set the rinse

procedure.

During standard and jeans programs,

push the soak button to set different

rinse times ( 0, 1, 2 times)

During chemical fiber , cotton wool and

silk programs, push the soak button to

select rinse procedure, but the rinse times

cannot change.

During quick , super quick , programs, push

the soak button, the machine have no

reaction.

During standard program, the machine is

set to save water program. If you push the

rinse button before starting operation, it will

change to water storage rinse program.

Push the spin button to set

the spin procedure.

During standard and jeans

programs, push the spin

button to set different spin time

(from 0 to 6 minutes)

During chemical fiber , cotton

wool and silk programs, push

the spin button to select spin

procedure, but the spin time

cannot change.

During quick ,super quick

,programs, push the spin

button, the machine have no

reaction.

Spin button

SOAK

WASH

RINSE SPIN

Minute

Times

Minute

XQS52-78

Table of contents

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide