Haier HBF855TVE User manual
Automatic Drum
Washing Machine
HBF1055TVE HBF855TVE
Table of Contents
Before using
Names of Parts---------------------------------inside front cover
Matters Needing Attention-------------------------------------1-3
Installation---------------------------------------------------------4-5
Control Panel--------------------------------------------------------6
Operational Functions-----------------------------------------6-7
Program Selection-------------------------------------------------8
Preparation----------------------------------------------------------9
Washing Methods--------------------------------------------10-11
Maintenance
Maintenance ------------------------------------------------------13
Trouble Shooting-------------------------------------------------14
Technical Specification---------------------------------- --------16
Wiring Circuit------------------------------------------------------15
During using
Other Function----------------------------------------------------12
Names of Parts
Table Cover
Program Knob
Operation Button
Drainage hose clip
Back plate
Packing bolt (3)
Washing Allocating box
Wash Door
Observing Glass Window
Drainage hose
Earth terminal
Power supply cable
Back plate screw (3)
Caution and Warning symbols
For your safety and to prevent damages to the washing machine, any
instructions in this manual with this "Stop" sign shall be strictly followed.
For your safety, any instructions in this manual with this "Warning" sign
shall be strictly followed.
This diagram may vary slightly with the layout of the washing machine you have just purchased due
to technical improvements.
Spin speed selector knob
Safety
1. A separate earthed socket is required
for the power supply. After installation of
the washing machine,the power plug
should be accessible during the normal
wash.
3. Fuses in the power circuit should be rated
for 15A. Refer to a washing machine techni-
cian or a Haier designated service point for
power cable replacement.
5. Do not use flammable detergent or dry
cleaning agent; do not use flammable
spray in close vicinity to the washing
machine; do not remove or insert the plug
in the presence of flammable gas.
2. Hold the plug and not the electric cable
when unplugging the washing machine.
4. For your safety, dry hands before touch-
ing the washing machine and wear appropri-
ate footwear .
6. The door of the washing machine will be-
come hot during the water heating process.
Avoid contact with the door during the heat-
ing process. For safety, keep children away
from the washing machine.
7. Do not allow children play with the packing materials after unpacking.
Matters Needing Attention
1
ƽ
Matters Needing Attention
2
Use
ƽ
9. Keep the door slightly open when the washing machine is not being used. Never cover the
machine with a plastic sheet.
4. Do not wash foam rubber or similar sponge
materials.
5. Before washing, do up zippers, buttons ,
laces and repair damaged areas,under-
wear or small articals should be placed
in the laundry bag or a pillowslip.
Do not wash clothes containing wire
frames.
6. Do not open the detergent box during
thewashcycle.
7. The door is fitted with a self-lock device and
will not open until 2~3 minutes after the wash-
ing machine stops. Do not force the door
open. Do not open the door when water level
reaches the port hole.
8. After washing, turn off the tap to prevent
leakage; unplug the washing machine
and wipe clean the lower part of the port
hole.
3. Never place heavy objects ,a heating
applianceor a water container on the top panel
of the washing machine.
3
Matters Needing Attention
As shown in figure1 remove all the packing materials
(including the foam base).
Fig 1
Remove the packing screws as shown in figure 2.
The packing bolts protect the appliance from shock during trans-
portation The steps below should be followed before using the
appliance,
1. Remove the rear panel of the washing machine;
2. Remove the three packing bolts from the rear panel of the wash-
ing machine,the rubber hose and then the shock absorption chan-
nel steel;
3. Reinstall the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: the packing bolts and rubber hose should be kept in a
safe place for later use)
Adjusting the position of the washing machine .There are ad-
justable feet under the bottom of the washing machine. Before use,
the washing machine should be adjusted, as shown in figure 3, so
that it is level.
4
Installation
Upon opening of the package, water drops may be seen on
the plastic bag and the porthole. This in normal phenomenon
resultingfrom water test in the factory.
Fig 2
Fig 3
ƽ
ƽ
ƽ
Connection of water inlet hose and washing machine
Waterdrainagehose
Connection of power supply
The height of the terminal of the water drainage
hose should be between 80cm-100cm, the water
drainage hose must be securely placed on the clip
on the back of the washing machine.
Use the water drainage support supplied as an
accessory for proper installation of the water drain-
age hose .fix the water drainage hose support with
waterproof sring.Do not use an excessively long wa-
ter drainage hose and contract the authorized tech-
nician if the water drainage hose needs to be
extended.the water drainage hose should not be ex-
tended more than250cm.(longer extension will result
in concurrent water inflow and outflow).The diam-
eter of the extension hose should be the same as
the original hose.
caution:water drainage hose must not be immersed
in water.the original and extension hoses should be
tightly connected .
Installation
Check the following items before connection to the power supply.
The socket conforms to the maximun power load(The maximum current load of the socket and
power supply cable should not be less than 15A).
Power supply voltage conforms to the required value.
The power supply socket and the plug of the washing machine compatible,if they are compat-
ible ,Refer to a washing machine technician or a Haier designated service point for power cable
replacement.The washing machine should be connected to an earth before use.
Supplementary earth cable should not be necessary if the socket is connected to the earth.
Supplementary earth cable should be installed on the upper back of the washing machine
andconnected to an earth if the power supply socket has no earth connection.
5
100cm
80cm
.
.
HOT
H
hot
H
6
C
o
n
t
r
o
l
P
a
n
e
l
Turn the knob at "0", then turn off the power and
turn the program knob for setting desired wash program.
The program knob will not rotate with the programmed washing
process.
SOAK PAUSE/START
EXTRA RINSE
CYCLE CELECTOR
NO
MAX
MAX
NORMAL
LOW
LOW
SPIN
SPIN
NO
MAX
MAX
NORMAL
LOW
LOW
SPIN
SPIN
Spin speed selection knob
By turning this knob,the required spinning speed can be selected.
The maximum speed will vary when a different program is selected.
MODIFIERS
7
Operational Functions
Extra Rinse Button
Soak Button
Pause/Start Button
Press this button,the washing machine will not drain
before the final spin-drying cycle.a soaking cycle will
be started,and the inner drum will rotate once every 4
minutes(at both directions).If you want to spin the laundry,
press this button again ,the program will continue until it ends.
If press this button,an addtional rinse operation will
be activated before the softening cycle is reached.
When the electric cable of the washing maching is plugged
and a program is selected, after the washing spinning speed
function is set,lightly press this button,the operation will start.
During a wash cycle,press this button lightly,the operation will
pause.Press it again to resume operation.
Program Selection
8
Heavy
Prewash
Normal
Light
Delicate
Normal
Light
Delicate
Normal
Delicate
Normal
Delicate
Silk
8
9
10
11
12
13
14
15
0
1
2
3
4
5
6
7
Very heavy soil
Non-fade heavily soiled
woolen fabrics
Fading and medium
soiled woolen fabrics
Non-fade heavily soiled
silk fabrics
Fading and medium
soiled silk fabrics
End
Spin
Rinse
Quick
Medium-soiled lanudry
Fading and medium
soiled chemical fiber
Non-fade and medium
soiled chemical fiber
Non-fade heavily
soiled chemical fiber
Fading and medium
soiled cotton
Non-fade and medium
soiled cotton
Soiled cotton
Heavy soil
Program Setting Laundry Water
Temperature
*
Turn the program knob at "0" position and turn off the power. The wash
program ends and the washing machine stops operation.
NOTE: " " means softener liquid detergent canbe added when necessary.
" " means detergent can be added when necessary.
" " means no detergent can be added.
Hot
Hot
Warm
Warm
Cold
Cold
Cold
Cold
Cold
Cold
Cold
Cold
Cold
Warm
Other manuals for HBF855TVE
1
This manual suits for next models
1
Table of contents
Other Haier Washer manuals
Haier
Haier 636 Series User manual
Haier
Haier MWB146E User manual
Haier
Haier HWM20-0701 Manual
Haier
Haier HWF 5000 AW User manual
Haier
Haier XPB150-0623S Instruction Manual
Haier
Haier HW-E1060TVE User manual
Haier
Haier HW-K1200 Configuration guide
Haier
Haier mini33 User manual
Haier
Haier HW80-B14876 User manual
Haier
Haier HA655TME User manual
Haier
Haier XQBM30-22 User manual
Haier
Haier HWM100-99VGS User manual
Haier
Haier HWM80-113S User manual
Haier
Haier JW-YP60A User manual
Haier
Haier HW-F1481 ME User manual
Haier
Haier HWM20-0701 User manual
Haier
Haier HLPW028BXW User manual
Haier
Haier XQB50-18 User manual
Haier
Haier XPB65-LAP User manual
Haier
Haier HW-C1070TVE User manual
Popular Washer manuals by other brands
Tricity Bendix
Tricity Bendix AW 1000 W Operating & installation instructions
Panasonic
Panasonic NA-F60L5WRB operating instructions
GE
GE WSLP1500 Dimensions and installation information
Electrolux
Electrolux EWF1284EDW Service manual
Bosch
Bosch WAN2829BSN User manual and installation instructions
LG
LG TV2516DV3B owner's manual
