Haier YR-E17A User manual
Wired Controller
Operation & Installation Manual
• Please read this operation manual before using the wired controller.
• Please keep this manual carefully and safely.
CONTENT
Parts and Functions............................................................ 1
Operation............................................................................ 6
Wired Controller Wiring Instruction................................... 34
YR-E17A
Ver: B
1
Interface Display
Parts and Functions
2
On/O key.
Mode key: Press this key to execute mode switch.
Fan key: Press this key to adjust fan speed.
Up/Down key: Press this key to adjust temperature
in the main Interface and other parameter value
in other interface. And the key is also used for
function switching.
Time key: Press this key to set clock time / Timer
and malfunction parameter queried.
Menu key: Press this key to enter function
circulation. Also this key is used to conrm
changes.
Key
Parts and Functions
Clock display , parameter display
Timer ON/OFF
ROOM /SET temperature display
Icon
3
Parts and Functions
ROOM/SET humidity display
Error icon
Four-sided air deector display ( Only valid
for part of models)
Up/Down Swing
Left/Right Swing (Only valid for part of models)
Set icon
Auto mode
Cooling mode
Heating mode
Fan mode
Dry mode
Turbo: This icon will be displayed only when turbo
function is set.
Quiet: This icon will be displayed only when quiet
function is set.
4
Parts and Functions
Sleeping: This icon is displayed when sleeping is
set, and remaining time of sleeping is displayed by
Health : This icon will be displayed only when
health function is set.
HRV (Heat Reclaim Ventilation): This icon will be
displayed only when HRV function is set.
Energy Saving: This icon will be displayed only
when energy saving function is set
Static Pressure: This icon will be displayed only
when setting static pressure function.
Filter Cleaning
Child Lock: This icon will be displayed only when
child lock function is set.
Lock
Central
Motion Sensing (only valid for part of models)
Master: This icon will be displayed only when
controller is set as master controller.
Slave: This icon will be displayed only when
controller is set as slave controller.
5
Parts and Functions
(1) fan speed( only valid for part models)
Breeze Fan Speed
Low Fan Speed
Medium Fan
Speed
High Fan Speed
Super Fan Speed
Auto Fan Speed
(2) fan speed( only valid for part models)
Seven gear
Sixth gear
Fifth gear
Fourth gear
Third gear
Second gear
First gear
Auto
6
Operation
Basic function Method of operation
ON/OFF Press the key to switch on/o the
wired controller.
Mode control In the state of on, press the key
MODE to change mode.
Adjusting temperature In the state of on, press the key or
to adjust temperature.
Adjusting fan speed In the state of on, press the key FAN
to adjust fan speed.
Basic function description
7
Operation
Initialization
(1) The wired controller will display all the icons after be
powered on or reset, then it gets into the initializing process.
The controller will display in sequence as follows :
(the top-left corner) → → (the bottom-right corner)
→ (the top-left corner), the green LED (ON/OFF key)
ashes all the time until the initialization ends.
(2) If the wired controller can’t communicate with the indoor
unit PCB normally after powering on, the initialization will be
nished in 4 minutes, and then the communication malfunction
can be checked from the malfunction inquiry function.
Backlight time
(1) In the state of o , when the backlight is lit up, long press
TIME and keys for 5 seconds to set backlight time, the
parameter value is displayed in the upper left corner. Press
or key to switch parameter between 00(means backlight
always on)/15S/30S/60S and conrm by pressing the key
MENU.
(2) The backlight time is xed for 15 seconds when the
controller is turned o.
8
Operation
Note:
When controlling Fresh Air unit, the controller’s main interface
will not display and keys in normal state. If you need to
adjust the backlight time, please press MENU key to display
and keys. And then long press TIME and keys for 5
seconds to set backlight time.
Clock
(1) The controller uses 24-hour clock. The default is 12:00
when the wired controller is turned on for the rst time.
(2) When the backlight is on, long press TIME key for 5
seconds to enter clock setting function. At this time, the minute
of the time and icon are ashing in the upper left corner.
You can use or key to adjust the minute value, and long
press or key to speed up the adjustment. Then press
TIME key to switch to hour adjustment, and use or key to
adjust the hour value. Finally, you need to press MENU key to
conrm the changes and return to the main interface.
(3) In the process of time adjustment, if there is no operation
for 10 seconds or press MODE / FAN key, it will quit and
previous changes are invalid.
(4) Under timer or sleeping function, clock time can’t be
adjusted.
9
Operation
(1) Timer function includes Timer on, Timer o and Timer on/
o.
(2) Press TIME key to enter timer setting, then you can use
TIME key to switch parameters, the timer function circulation is
as follows:
(ON and the hour position are ashing) →
(ON and the minute position are ashing) →
(OFF and the hour position are ashing) →
(OFF and the minute position are ashing) →
(ON and the hour position are ashing) →
(ON and the minute position are ashing) →
(OFF and the hour position are ashing) →
(OFF and the minute position are ashing) →
the timer icon disappears (cancel timer function).
Timer
Other Haier Controllers manuals
Haier
Haier YCZ-A004 User manual
Haier
Haier HW-WA101DBT User manual
Haier
Haier YR-E20 User manual
Haier
Haier YCZ-A004 User manual
Haier
Haier HW-BA101ABT User manual
Haier
Haier YCZ-A001 User guide
Haier
Haier QACT17A User manual
Haier
Haier RWV05 V2 User manual
Haier
Haier QACT17A User manual
Haier
Haier QACT17A User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
