Haier ESA415J User manual
Model No.ESA415J
SERVICE MANUAL
Order No.AC0909S006V0
Haier Group
Feature
Top Discharge Airflow Pattern
Modern Family-look Design
3 Cool Settings, 3 Fan Settings
Easy-to-ins tall Mounting Kit
Easy-Access Washable Filter
Digital Time & Temperature Display
24 Hour on/off Timer
©2008 (Qingdao Haier Air Conditioner General corp.,Ltd)
All right reserved .Unauthorized copying and distribution is a violation of law
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or
repair the product or products dealt with in this service information by anyone else could result in serious injury or death
WARNING
1. Product Code Illumination and Series introduction.......................................
2. Specifications....................................................................................................
3. Safety and Precaution.......................................................................................4
4. Warning and Cautions.......................................................................................5
5. Installation and Accessory Parts......................................................................7
6. Parts and Functions.........................................................................................
13
7. Abnormity Diagnose.........................................................................................
17
8. System Flow Chart...........................................................................................20
9. Circuit Diagram.................................................................................................21
10. Wiring Diagram...............................................................................................22
Table of Contents
2
3
ESA415J Table of Contents
Domestic Air Conditioner
1
Indoor air state outdoor air state
No. Operating condition D.B. ℃ W.B. ℃ D.B. ℃ W.B. ℃
1 Nominal cooling 26.7 19.4 35 23.9
1. Product Code Illumination and Series Introduction
1). Model identification:
A: Abbre viation of Energy Star
B: The type of refrigerant
4:R410A
C: Nominal cooling capacity (BTU/h) with the first two numbers based on one thousand unit
D: Desigh code
Examples:
ESA415J
It represents remote control window air condition r. Cooling capacity is 14500BTU/h and the power supply
is 115V/60Hz.
2). Standard situation/conditions
ESA □□ □
AC D
ESA415J Table of Contents
Domestic Air Conditioner
2
□
B
2. Specification
Item Unit ESA415J
Cooling capacity BTU/h 14500
Heating capacity /
Power supply Ph,V, Hz 1, 115, 60
Power input W 1350
Running current A 12Cooling
EER
BTU/(h.w) 10.7
Power input W /
Running current A / Heating
COP
/
Indoor side dB(A) 54
Sound Level Outdoor side 61
Height inches 16 3/4
Width inches 24 3/8
Case
Depth
inches 23 7/16
Height inches 20 7/8
Width inches 27 1/8
Packaging
dimensions Depth
inches 28 3/4
Net lbs 103
Weight Gross
lbs 117
Type Rotary
Model /
Compressor
Running cap. For comp μF 60μF/250V
Hi-Pressure Psig 450
Pressure Low-Pressure
Psig 240
Model R22 or R410A R410A
Refrigerant Charge OZ 33.1
Indoor unit / centrifugal
Type Outdoor unit
/ axial
Fan
Fan Speed
Indoor unit r/min
Air volume CFM 380/340/310
Moisture removal Pints/hr 4.0
1060/1020/980
44A321AK-5EKD
ESA415J Specification
Domestic Air Conditioner
3
BTU/h
BTU/(h.w)
dB(A)
ESA415J Safety and Precaution
Domestic Air Conditioner
4
3. Safety and Precaution
WARNING: Following these basic precautions will reduce the risk of fire ,electrical shock ,injury or death
when using your air conditioner .
1) Air conditioner must be connected to proper electrical outlet with the correct electrical supply .
4)DO NOT USE AN ADAPTER OR AN EXTENSION CORD.
5)When installing your air conditioner in a window,make sure the window is strong enough to hold the weight
of the air conditioner.You also want to secure and correctly install your air conditioner property to prevent it
from falling.Extra brackets or support may be required depending on your window.
3) DO not use if power cord is frayed or damage . Also avoid using if there are cracks or abrasion damage
along the length ,plug or connector .
6) Do not black airflow inside or outside the air conditioner with blinds,drapes,protective covers,shrubs or
bushes.
9)Always unplug the air conditioner before servicing it or moving it .
7)Be careful of sharp edges on the front and rear fins of the unit that could cut and cause serious injury.
8)Be careful when lifting the air conditioner to install or remove the unit . Always use two or more people
for this .
2) Proper grounding must be ensured to reduce the risk of shock and fire .
DO NOT CUT OR REMOVE THE GROUNDING PRONG.
If you do not have a three-prong electric receptacle outlet in the wall, have a certified electrician install the
proper receptacle . The wall receptacle MUST be properly grounded .
ESA415J Warning and Cautions
Domestic Air Conditioner
5
4.Warning and Cautions
WARNINGS: Following the safety messages is very important.
These messages can save you from being injured or killed. Warning symbols alert you to be
This room air conditioner must be grounded. Grounding reduces the risk of electric shock by
providing an escape wire for the electric current. The power cord has a grounding wire with a
grounding plug . Plug it into an outlet that is properly installed and grounded.
Improper use of the grounding plug can result in a risk of electric shock.
Call a qualified electrician if you don’t understand the grounding instructions or if you are not sure
if the air conditioner is properly grounded. If the wall outlet is not grounded, please contact an
electrician to have it replaced with a proper grounded outlet.
We strongly advise against using an adapter plug.
careful and means Danger . Always follow instructions to be safe and reduce chances of injury
or death . Warning and Danger signs will precede safety messages.
Electrical Safety
GROUNDING:
WARNING:
Do not, under any circumstances, cut or remove the third (ground) prong from the
power cord.
Adapter Plug:
ESA415J Warning and Cautions
Domestic Air Conditioner
6
TIPS
This air conditioner is designed for use in a double hung window.
When installing your air conditioner, make sure to seal all areas where there is a possibility of air leakage.
The airflow should not be blocked either inside by curtains, drapes or furniture, or outside bu shrubs or bushes.
Do not needlessly use electrical light or other appliances that produce heat.
Keep the blinds and drapes drawn on all other windows.
While cooking, use an exhaust fan in the kitchen to remove the excess heat.
Always use the correct BTU size air conditioner to cool the room to attain optimum efficiency.
While installing unit be sure to tilt air conditioner 5 degrees outward to have the water drip outside the house.
Install the unit on the north side, as that is normal the shaded side. This will enhance the operation of your unit.
Energy Saving Guide
The window has to be strong for installation. Extra brackets and/or support may be reqired depending on your
window. (Brachets and supports not included in all models.)
Masure the window before installing. If the window is too big for the unit, you may require professional installation.
Use the correct electric voltage and proper ampere for the unit to run effectively.
Only let a certified electrician modify your electrical outlet.
Use a dedicated line fot the operation of your air conditioner to avoid the possibility of an electrical surge.
ESA415J Installation and Accessory Parts
Domestic Air Conditioner
7
5. Installation and Accessory Parts
Check the following before you install your air conditioner:
1) The unit is free of all obstructions inside and outside the room e.g. drapes, curtains, furniture, plants,
shrubs, bushes, trees, other structures like building, garage etc.
Air conditioner must have clear unobstructed airflow through the condenser to remove the heat.
2) The window is strong enough to hold the weight of the air conditioner. Extra brackets or supports may be
needed depending on your windows. Brackets or supports not not provided in all models.
3) The window sill and track are strong enough to hold the weight of the air conditioner.
4) The wall is strong enough to hold the unit. Extra brackets or supports may be needed depending on the
wall. (Brackets or Supports not provided in all models).
5) There is adequate and proper power supply near the air conditioner.
6) DO NOT use adopter plugs.
7) DO NOT use extension cords.
8) DO NOT cut or remove the ground prong.
9) DO NOT modify the plug or the electrical wall outlet in any way. If plug does not fit the electrical outlet
have a certified electrician do the necessary change.
10) NOT connect electrical power to the unit before installation.
11) DO NOT use if power cord is worn out, hayed or damage. Avoid using if here are cracks or abrasion
damage along the length, plug or connection.
12) DO NOT install into any existing cabinet or sleeve which does not have ride and top air vents.
13) Be careful of exposed sharp edges of the cabinet and sharp coils (fins) on the back of the unit that could
cut and cause serious injury.
ESA415J Installation and Accessory Parts
Domestic Air Conditioner
8
A. 28³⁄8” (72.1 cm) minimum
B. 17³⁄8” (44.1 cm) minimum
Window Installation
Window opening measurements:
■ 28 3⁄8 ” minimum to 38” (72.1 cm to 96.5 cm) maximum opening
width.
■ 17 3⁄8 ” (44.1 cm) minimum opening height.
A
B
Unpack unit on the floor next to installationlocation.
1. Remove two front attachment screws.Separate the outer case from the front with a putty knife at the catch points
designated by the arrows.
2. Remove the two screws on top of the outer case.
3. Using the basepan handle, slowly and evenly pull chassis out from outer case.
Prepare unit for installation
Prepare Air Conditioner for Installation
NOTE: Cover putty knife blade with masking tape to guard against damage of the unit finish.
CAUTION:
Never expose plastic front or grille to extreme temperatures.
NOTE: Attach curtains to the air conditioner before placing the air conditioner in window.
1. Install top channel with four 13/32” screws.
2. Slide left-hand curtain assembly into left end of top and bottom channels. Repeat for right-hand curtain assembly.
3. Fasten curtain retainer strips to the sides of the outer case with eight 13/32” screws.
Assemble Curtain/Top channel
ESA415J Installation and Accessory Parts
Domestic Air Conditioner
9
AB
C
D
A. Top channel
B. 13/32” screws
C. 13/32” screws
D. Side curtains
B
A
Prepare Window for Installation
1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
A. Width of window opening
B. Center line
NOTES:
Handle the air conditioner gently.
Be sure your air conditioner does not fall out of the opening during installation or removal.
The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded
outlet.
Do not block the louvers in the front panel.
Do not block the louvers on the outside of the air conditioner.
Position Air Conditioner
Other manuals for ESA415J
2
Table of contents
Other Haier Air Conditioner manuals
Haier
Haier HW-09CH03 User manual
Haier
Haier JS025-C2 User manual
Haier
Haier ESA3067 - annexe 1 User manual
Haier
Haier H2SM- User manual
Haier
Haier HWF05XC7 User manual
Haier
Haier 1U68REMFRA User manual
Haier
Haier HSU-09XC7 User manual
Haier
Haier AU122AEERA User manual
Haier
Haier HSU-09HX03 User manual
Haier
Haier 1UH071N1ERG User manual
Haier
Haier HSU-12HR03 User manual
Haier
Haier HSU-09LEK13/R2 Installation manual
Haier
Haier H2SM-18CB03/R1 User manual
Haier
Haier 3U55S2PR1FA User manual
Haier
Haier HSU-24HEA03-R2-I User manual
Haier
Haier H2SM- - annexe 14 User manual
Haier
Haier HPC12XHR User manual
Haier
Haier HSU-09HVD03/R2 - annexe 2 User manual
Haier
Haier HSU-07RB03 User manual
Haier
Haier 3HUM20HA03/R2 User manual
Popular Air Conditioner manuals by other brands
Fujitsu
Fujitsu Inverter ASBA30JFC operating manual
Toshiba
Toshiba RAS-M10SMUV-E installation manual
Daikin
Daikin FXLQ20MAVE Operation manual
Hitachi
Hitachi RAS-E24CAK instruction manual
CIAT
CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance
Bestron
Bestron AAC6000 instruction manual
