Haier 10571223 User manual

Packaged unit

Operation Manual

AP42NACAAA

AU42NAIAAA

(HPU-44H03)

AP42NACMAA

AU42NAIMCA

(HPU-42C03)

No.0010571223

Ion

TIMERON

TIMEROFF

TIMER

CLOCK

SET

TIME

SLEEP

MED

SETTEMP

ROOMTEMP

TEMP

SWING

MODE

FAN SPEED

OFF

TEMP

SWING

FAN

OFF

MODE SLEEP

SET

CLOCK

TIMER

RESETLOCK

Operation

Content

Cautions

Parts

Indoor unit

Outdoor unit

Operation display

Wireless remote control

Operation

Auto

Cooling operation

Dry operation

Heating operation

Fan operation

Sleep

Timer ON and Timer OFF

Air flow adjustment

Operation hints

Energy saving

Cautions for the operation

Maintenance

Air filter and unit cleaning

Before/after season maintenance

Trouble shooting

When problems occur

Indoor & outdoor unit connection

Tools necessary

Installation procedures

Electric wiring

Others

1-2

CAUTIONS

Disposal of the old air conditioner

Before disposing an old air conditioner

that goes out of use, please make sure

it's inoperative and safe. Unplug the air

conditioner in order to avoid the risk of

child entrapment.

It must be noticed that air conditioner

system contains refrigerants, which

require specialized waste disposal. The

valuable materials contained in a air

conditioner can be recycled. Contact

your local waste disposal center for

proper disposal of an old air conditioner

and contact your local authority or your

dealer if you have any question. Please

ensure that the pipework of your air

conditioner does not get damaged prior

to being picked up by the relevant

waste disposal center, and contribute

to environmental awareness by

insisting on an appropriate, anti-

pollution method of disposal.

Disposal of the packaging of your

new air conditioner

All the packaging materials employed

in the package of your new air

conditioner may be disposed without

any danger to the environment.

The cardboard box may be broken or

cut into smaller pieces and given to a

waste paper disposal service. The

wrapping bag made of polyethylene

and the polyethylene foam pads

contain no fluorochloric hydrocarbon.

All these valuable materials may be taken

to a waste collecting center and used again

after adequate recycling.

Consult your local authorities for the name

and address of the waste materials

collecting centers and waste paper

disposal services nearest to your house.

Safety Instructions and Warnings

Before starting the air conditioner, read

the information given in the User's Guide

carefully. The User's Guide contains very

important observations relating to the

assembly, operation and maintenance of

the air conditioner.

The manufacturer does not accept

responsibility for any damages that may

arise due to non-observation of the

following instruction.

Damaged air conditioners are not to

be put into operation. In case of doubt,

consult your supplier.

Use of the air conditioner is to be

carried out in strict compliance with the

relative instructions set forth in the User's

Guide.

Installation shall be done by professional

people, don't install unit by yourself.

CAUTIONS

For the purpose of safety, the air

conditioner must be properly grounded

in accordance with specifications.

Always remember to unplug the air

conditioner before opening inlet grill.

Never unplug your air conditioner by

pulling on the power cord. Always grip

plug firmly and pull straight out from

the outlet.

All electrical repairs must be carried

out by qualified electricians.

Inadequate repairs may result in a

major source of danger for the user of

the air conditoiner.

Do not damage any parts of the air

conditioner that carry refrigerant by

piercing or perforating the air

conditioner's tubes with sharp or

pointed items, crushing or twisting any

tubes, or scraping the coatings off the

surfaces. If the refrigerant spurts out

and gets into eyes, it may result in

serious eye injuries.

Do not obstruct or cover the

ventilation grille of the air conditioner.

Do not put fingers or any other things

into the inlet/outlet and swing louver.

Do not allow children to play with the

air conditioner. In no case should

Specifications

The refrigerating circuit is leak-proof.

Parts

1Outlet grill

2Operation panel

3Inlet grill

4Air filter

5Remote-controller

Indoor unit

TEMP

SWING

FAN

OFF

MODE SLEEP

SET

CLOCK

TIMER

RESET

LOCK

Outdoor unit

Air inlet

[At side and rear]

Air outlet

Parts

Manual Operation

Ion

TIMER ON

TIMER OFF

TIMER

CLOCK

SET

TIME

SLEEP A

LOW

MID

HIGH

SET

TEMP

ROOM

TEMP

SWING

MODE

FAN SPEED

OFF

76532

Remote controlled operation

Power ON/OFF

Used for unit

start and stop.

SWING

Used to set auto

fan direction

MODE

Used to select

AUTO run,

COOL, DRY,

HEAT and FAN

operation.

CLOCK

Used to set correct

time.

TIMER

TEMP

Used to select your

desired temp.

FAN

Used to select fan

speed: LO, MED,

HI, AUTO.

SLEEP

Used to select

sleep mode

SET

Used to confirm

Timer and

Clock setting.

HOUR

Used to set clock

and timer setting.

RESET

Used to reset the controller

back to normal condition.

AUTO

ON OFF

PM AM

TEMP

SWING

FAN

OFF

MODE SLEEP

SET

CLOCK

TIMER

RESET

DRY

COOL

AUTO

SWING

FAN SPEED

LO MED

AUTO

SLEEP

TIMER ON

TIMER OFF

CLOCK

TEMP

SIGNAL

SENDING

FAN

OPERATION

HEAT

AUTO

ON OFF

PM AM

TEMP

SWING

FAN

OFF

MODE SLEEP

SET

CLOCK

TIMER

RESET

HI AUTO

LOCK

Used to select

TIMER ON, TIMER

OFF, TIMER

Used to lock buttons

and LCD display.

Note: Auxiliary heat function is not available.

For cooling only type, heating function is not available.

Operation

Clock set

When unit is started for the first time

and after replacing batteries in remote

controller, clock should be adjusted as follows:

Press CLOCK button, "AM"or "PM" flashes.

Press or to set correct time. Each press will increase

or decrease 1min . If the button is kept depressed, time

will change quickly.

After time setting is confirmed, press SET, "AM" and "PM"

stop flashing, while clock starts working.

Remote contronller's operation

When in use, put the signal transmission head directly

to the receiver hole on the indoor unit

The distance between the signal transmission head and

the receiver hole should be within 7m without any

obsacles as well.

Don't throw the controller, prevent it from being damaged.

When electronic-started type fluorescent lamp or change-over

type fluorescent lamp or wireless telephone is installed in the

room, the receiver is apt to be disturbed in receiving the signal

so the distance to the indoor unit should be shorter.

Loading of the battery

Slinghtly press " " and push down the cover.

Load the batteries as illustrated.

2 R-03 dry batteries, (cylinder)

Be sure that the loading is in line with the "+"/"-" pole

request as illustrated.

Put on the cover again

Confirmation indicator:

In disorderation, reload the batteries or load the new batteries after 5 mins.

reset key

TEMP

SWING

FAN

OFF

MODE SLEEP

SET

CLOCK

TIMER

RESETLOCK

TIMER

CLOCK

SET

TIME

SLEEP

TEMP

SWING

MODE

FAN SPEED

OFF

THE MACHINE IS ADAPTIVE IN FOLLOWING SITUATION

Applicable ambient temperature range:

Cooling

Heating

Indoor

Outdoor

Indoor

Outdoor

Maximum: D.B/W.B

Minimum: D.B/W.B

Maximum: D.B/W.B

Minimum: D.B

Maximum: D.B

Minimum: D.B

Maximum: D.B/W.B

Minimum: D.B/W.B

32 C/23 C

18 C/14 C

18 C

43 C/26 C

27 C

15 C

24 C/18 C

-7 C/-8 C

Note:The waster batteries should be disposed properly,use two new same-type batteries when loading.

If the remote controller canít function normally or doesnít work at all,use a sharp-pointed item to pres

the reset key.

Hint:Remove the batteries in case unit wonít be in usaged for a long period.

If there are any displays after taking-out just need to press reset key.

TIMER

CLOCK

SET

TIME

SLEEP A

LOW

MID

HIGH

SET

TEMP

SWING

MODE

FAN SPEED

OFF

Operation

Auto

Manual Operation

Remote-controlled Operation

Note:

During Auto run operation, temp. setting will not be shown in

LCD display, unit will select heating, cooling or fan operation

according to the room temp.

AUTO

TEMP

SWING

FAN

OFF

MODE SLEEP

SET

CLOCK

TIMER

RESET

LOCK

AUTO COOL DRY HEAT FAN

1Press ON/OFF button

Unit starts running.

The previous status appears on the display

(except. TIMER, SLEEP and SWING mode)

Press MODE button. For each press, operation

mode changes as follows:

Press ON/OFF button

Unit stops running.

Select Auto run,

" " appears and auto run starts.

AUTO COOL DRY HEAT FAN

Manual

Remote

controlled

Operation

Cooling

Manual Operation

TIMER

CLOCK

SET

TIME

SLEEP

SET

TEMP TEMP

TEMP

SWING

MODE

FAN SPEED

OFF

Remote-controlled Operation Press ON/OFF button

Unit starts running.

The previous status appears on the display

(except. TIMER, SLEEP and SWING mode)

Press MODE button. For each press,

operation mode changes as follows:

Select temp. button

Press TEMP button

Every time the button is pressed, temp. setting

increases 1 C

Every time the button is pressed, temp. setting

decreases 1 C

If the button is kept pressed, setting will increase or

decrease quickly.

Press ON/OFF button

Unit stops running,and when ectering this mode for the

next time,it will show the previous setting.

Unit runs at the speed displayed on LCD.

TEMP

SWING

FAN

OFF

MODE SLEEP

SET

CLOCK

TIMER

RESET

LOCK

Select cooling operation, Shows" "

Cooling operation starts.

Press FAN button. For each press, fan speed

changes as follows:

AUTO

LOW MID HIGH LOW LOW MID MID

LOW HIGH

HIGH

MID

LOW

AUTO

Manual

Remote

controlled

AUTO COOL DRY HEAT FAN

Manual

Remote

controller

LOW MID HIGH

Operation

Dry

Manual Operation

Remote-controlled Operation

Press ON/OFF button

Unit starts running.

The previous status appears on the display

(except. TIMER, SLEEP and SWING mode)

Press MODE button. For each press, operation mode changes

as follows:

Select Drying operation shows" "

Dry operation starts

Select temp. button

Press TEMP button

Every time the button is pressed, temp. setting increases 1 C

Every time the button is pressed, temp. setting decreases 1 C

If the button is kept pressed, setting will increase or decrease quickly.

Press FAN button. For each press, fan speed changes as follows:

Press ON/OFF button

Unit stops running, and when

entering this mode for the next

time, it will show the previous setting

Unit runs at the speed displayed on LCD.

In DRY mode, when room temp.becomes 2 C higher than temp. setting,

unit will run intermittently at LOW speed regardless of FAN setting.

TIMER

CLOCK

SET

TIME

SLEEP

SET

TEMP TEMP

TEMP

SWING

MODE

FAN SPEED

OFF

5COOL operation starts when

room Ultra-low air flow

Temp.setting+2 C

Temp.setting

TEMP

SWING

FAN

OFF

MODE SLEEP

SET

CLOCK

TIMER

RESET

AUTO

LOCK

LOW

AUTO COOL DRY

Manual

Remote

controller

HEAT

FAN

AUTO

LOW MIDHIGH LOW LOW MID MID

LOW HIGH

HIGH

MID

LOW

AUTO

Manual

Remote

controlled

On reaching 2 C higher than temp.

setting,unitwill run in mild DRY mode.

This manual suits for next models

Table of contents

Other Haier Air Conditioner manuals

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual