H3C LSQM1TGS24QSA0 User manual

H3C LSQM1TGS24QSA0

Interface Card

User Manual

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6PW103-20190730

and its licensors

No part of this manual may be reproduced or transmitted in any form

or by any means without prior written consent of Ne w H3C

Technologies Co., Ltd.

Trademarks

Except for the t rademarks of New H3C Technologies Co., Ltd., any

trademarks that may be mentioned in this document are the property

of their respective owners.

Notice

The information in this document is subject to change without notice.

All contents in this document, including statements, information, and

recommendations, are believed to be accurat e, but the y are

presented without warranty of any kind, express or implied. H3C shall

not be liable for technical or editorial errors or o missions contained

herein.

Environmental protection

This product has been designed to comply with the environmental

protection requirements. The storage, use, and disposal of th is

product must meet the applicable national laws and regulations.

Contents

Introduction ··············································· 1

Overview ······································································· 1

LEDs ············································································ 2

Installing and removing an interface card ········· 4

Installing an interface card ················································ 4

Removing an interface card ·············································· 6

Installing and removing SFP, SFP+, and QSFP+ transceiver

modules and DAC cables ················································· 7

Verifying the installation ··················································· 7

Introduction

Overview

LSQM1TGS24QSA0 interface cards are similar in appearance. Each

provides 24 SFP+ ports and two QSFP+ ports.

Figure 1 LSQM1TGS24QSA0 interface card front panel

(1) SFP+ port LED (2) QSFP+ port LED

(3) QSFP+ port (4) SFP+ port

NOTE:

• LSQM1TGS24QSA0 interface cards are currently

applicable only to H3C S7502E-XS and S7504E-XS

switches. The applicable switch models might change over

time. For the most recent list of applicable switch models,

contact H3C Support or marketing staff.

• For more information about transceiver modules and cables

available, see H3C S7500E-XS Switch Series

Transceiver Modules Compatibility Matrixes.

For more information about H3C QSFP+ transceiver modules,

QSFP+ DAC ca bles, QSFP+ optical cables, and QSFP+ to SFP+

DAC cables, see H3C Transceiver Modules User Guide

at www.h3c.com.

LEDs

Table 1 describes SFP+ port LEDs. Table 2 describes QSFP+ por t

LEDs.

Table 1 SFP+ port LED description

LED status Description

Steady green

A transceiver module is installed in the port.

The port is operating at 10 Gbps, and a link is

present on the port.

Flashing green The port is sending or receiving data at 10

Gbps.

Steady yellow

A transceiver module is installed in the port.

The port is operating at 1 Gbps, and a link is

present on the port.

Flashing yellow The port is sending or receiving data at 1

Gbps.

Off No transceiver module is installed in the port,

or no link is present on the port.

Table 2 QSFP+ port LED description

LED status Description

Steady green

A transceiver module is installed in the port.

The port is operating at 40 Gbps, and a link is

present on the port.

LED status Description

Flashing green The port is sending or receiving data at 40

Gbps.

Steady yellow

A transceiver module is installed in the port.

The port is operating at 10 Gbps, and a link is

present on the port.

Flashing yellow The port is sending or receiving data at 10

Gbps.

Off No transceiver module is installed in the port,

or no link is present on the port.

NOTE:

The SFP+ port LEDs and QSFP+ port LEDs are not affected b

the port mode switching button on your switch. For more

information about the port mode switching button, see the

installation guide of the switch.

Installing and removing an interface

card

CAUTION:

• Before you install or remove an interface card, wear an ESD

wrist strap and make sure the strap makes good skin

contact and is reliably grounded.

• To avoid device damage, do not use excessive force when

you install or remove an interface card.

The installation and removal procedures ar e the same f or

LSQM1TGS24QSA0 interface cards.

Installing an interface card

Before you install an interface card, remove the filler panel (if an y)

from the target slot. Keep the re moved filler panel secure for futu re

use.

To install an interface card:

1. Unpack the interface card.

Figure 2 LSQM1TGS24QSA0 interface card

(1) Ejector lever (2) Latch

2. Press the latch on the interface card to release the ejector lever.

3. As shown by callout 1 in Figure 3, insert the interface card

slowly into the slot along the guide rails.

4. Rotate inward the ejector lever as shown by callout 2 in Figure 3

until the latch locks the ejector lever in place.

Figure 3 Installing an interface card

Removing an interface card

CAUTION:

• Before you remove an interface card, remove the cable from

it to avoid cable damage.

• After removing an interface card, if no new interface card is

to be installed, install the filler panel as soon as possible to

prevent dust and ensure good ventilation in the device.

To remove an interface card:

1. Prepare an anti-static bag.

2. Press the latch to release the ejector lever

3. Rotate outward the ejector lever as shown by callout 1 in Figure

4. Pull out the interface card slowly out of the interface card slot, as

shown by callout 2 in Figure 4.

5. Place the removed interface card in the anti-static bag.

Figure 4 Removing an interface card

Installing and removing SFP, SFP+, and

QSFP+ transceiver modules and DAC cables

For information about installing and removing SFP/SFP+ transceiver

modules and SFP+ DAC ca bles, see H3C SFP/SFP+/XFP

Transceiver Modules Installation Guide at www.h3c.com.

For information about installing and removing QSFP+ transceiver

modules and DAC cables, see H3C QSFP+ Transceiver

Modules/Cables Installation Guide at www.h3c.com.

Verifying the installation

After the installation is complete, identify whether the interface card is

operating correctly.

If the interface c ard fails to oper ate correctly, perform the following

steps:

1. Reinstall it following the installation procedures described in this

document.

2. If the problem persists, contact H3C Support.

Table of contents

Other H3C Switch manuals

H3C

H3C S7500 Series User manual

H3C

H3C S3100 Series Installation instructions

H3C

H3C S9500 Series User manual

H3C

H3C S6860 Series User manual

H3C

H3C S5120-EI Series User manual

H3C

H3C S3100-52P Installation instructions

H3C

H3C S6861 Series User manual

H3C

H3C S10506 Operating and maintenance manual

H3C

H3C S9500E Series User manual

H3C

H3C S12500 Series User manual

H3C

H3C S1200 Series User manual

H3C

H3C s5820x series User manual

H3C

H3C S9500 Series User manual

H3C

H3C CR19000-16 Operating and maintenance manual

H3C

H3C S5130S-EI series Owner's manual

H3C

H3C S7504E-XS Operating and maintenance manual

H3C

H3C S7508E-X User manual

H3C

H3C S6300 Series User manual

H3C

H3C S7500 Series Installation instructions

H3C

H3C S5120-EI Series Installation manual

H3C

H3C FS5300-EI Series Instruction Manual

H3C

H3C S9500 Series Installation instructions

H3C

H3C S12500X-AF Series User manual

H3C

H3C S9500 Series User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual