Operation Manual – HVRP
H3C S9500 Series Routing Switches Chapter 1 HVRP Configuration
1-9
Aswitch located on the intersection point of the intersected rings must be configured to
age all the VLANs.
Follow these steps to configure the system to age all the VLANs:
To do … Use the command … Remarks
Enter system view system-view —
Configure the system to age all
the VLANs hvrp vlan-age all Optional
1.3 Displaying and Maintaining HVRP Configuration
To do … Use the command … Remarks
Display brief HVRP information display hvrp brief Available in any view
Display detailed information on
HVRP display hvrp verbose Available in any view
Display local VLAN information display hvrp local-vlan Available in any view
Display information on VLANs
that are actually allowed to
pass through the ports display hvrp port-vlan Available in any view
Enable HVRP error debugging debugging hvrp error Available in user view
Enable VLAN debugging of
HVRP debugging hvrp info Available in user view
1.4 HVRP Configuration Example
I. Network requirements
zThe topology is a single ring network.
zSTP is enabled network wide, with Switch 1 as the root bridge.
zSwitch 1, Switch 2, Switch 3, Switch 4, and Switch 5 are all Layer 2 switches.
Switch 1 is the root bridge and the rest switches connect with Layer 3 devices via
Switch 1.
zThe link between Switch 3 and Switch 4 is blocked by STP.
zUser 1 and user 4 are household users who only want to visit the Internet through
Switch 1; user 2 and user 3 are enterprise users, and therefore in addition to
visiting the Internet, they also want to visit each other.
zUsers refer to all users connected with the switches, including terminal users and
DSLAM users.
