H3C S3100-52P Installation instructions
H3C S3100-52P Ethernet Switch
Command Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: 20080710-C-1.01
Product Version: Release 1602
Copyright © 2007-2008, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
Technical Support
customer_service@h3c.com
http://www. h3c.com
About This Manual
Organization
H3C S3100-52P Ethernet Switch Command Manual is organized as follows:
Part Contents
1 CLI Introduces the commands used for
switching between the command levels
and command level setting.
2 Login Introduces the commands used for
logging into the Ethernet switch.
3 Configuration File Management Introduces the commands used for
manipulating the configuration files.
4 VLAN Introduces the commands used for
configuring VLANs.
5 IP Address and Performance Introduces the commands used for
configuring IP addresses and IP
performance.
6 Voice VLAN Introduces the commands used for voice
VLAN configuration.
7 GVRP Introduces the GVRP-related
commands.
8 Port Basic Configuration Introduces the basic port configuration
commands.
9 Link Aggregation Introduces the commands used for link
aggregation.
10 Port Isolation Introduces the commands used for port
isolation.
11 Port Security-Port Binding Introduces the commands used for port
security configuration and port binding.
12 DLDP Introduces the DLDP-related
commands.
13 MAC Address Table Management Introduces the commands used for MAC
address forwarding table management.
14 MSTP Introduces the STP-related commands.
15 Static Route Introduces the commands used for static
route configuration.
16 Multicast Introduces the commands used for
multicast protocol configuration.
Part Contents
17 802.1x and System Guard Introduces the commands used for
802.1x-System Guard configuration.
18 AAA Introduces the commands used for AAA,
RADIUS, HWTACACS, and EAD
configuration.
19 Web Authentication Introduces the commands used for Web
Authentication
20 MAC Address Authentication Introduces the commands used for MAC
address authentication.
21 ARP Introduces the ARP-related commands.
22 DHCP Introduces the commands used for
DHCP, DHCP-snooping configuration.
23 ACL Introduces the ACL-related commands.
24 QoS-QoS Profile Introduces the commands used for QoS
and QoS profile configuration.
25 Mirroring Introduces the commands used for port
mirroring.
26 Stack-Cluster Introduces the commands used for
cluster management.
27 SNMP-RMON Introduces the commands used for
SNMP and RMON configuration.
28 NTP Introduces the NTP-related commands.
29 SSH Introduces the commands used for
configuring SSH.
30 File System Management Introduces the commands used for file
system management.
31 FTP-SFTP-TFTP Introduces the
FTP-/SFTP-/TFTP-related commands.
32 Information Center Introduces the commands used for
configuring the information center.
33 System Maintenance and Debugging Introduces the commands used for
system maintenance and debugging.
34 VLAN-VPN Introduces the commands used for
VLAN VPN configuration.
35 HWPing Introduces the HWPing-related
commands.
36 IPv6 Management Introduces the commands used for IPv6
Management configuration.
37 DNS Introduces the commands used for
domain name resolution.
Part Contents
38 Smart Link-Monitor Link Introduces the commands used for
Smart Link, Monitor Link configuration
39 Appendix
Lists all the commands described in this
command manual in an alphabetic
order. The parts and pages where the
commands are described are also given.
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
&<1-n> The argument(s) before the ampersand (&) sign can be
entered 1 to n times.
# A line starting with the # sign is comments.
II. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.
Related Documentation
In addition to this manual, each H3C S3100-52P Ethernet Switch documentation set
includes the following:
Manual Description
H3C S3100-52P Ethernet Switch
Installation Manual It provides information for the system
installation and setup.
H3C S3100-52P Ethernet Switch
Operation Manual-Release 1602
It is used for assisting the users in
device configurations and typical
applications.
Obtaining Documentation
You can access the most up-to-date H3C product documentation on the World Wide
Web at this URL: http://www.h3c.com.
The following are the columns from which you can obtain different categories of product
documentation:
[Products & Solutions]: Provides information about products and technologies.
[Technical Support & Document > Technical Documents]: Provides several categories
of product documentation, such as installation, operation, and maintenance.
[Technical Support & Document > Product Support > Software]: Provides the
documentation released with the software version.
Documentation Feedback
We appreciate your comments.
Other manuals for S3100-52P
27
Table of contents
Other H3C Switch manuals
H3C
H3C S12500CR Series User manual
H3C
H3C SE-S5130 Series User manual
H3C
H3C WX3000 Series User manual
H3C
H3C s5800 series User manual
H3C
H3C S5120-HI Series User manual
H3C
H3C S5500-SI Series User manual
H3C
H3C S5500-EI series Installation manual
H3C
H3C S9804 User manual
H3C
H3C S9500E Series User manual
H3C
H3C S7500E-XS Series User manual
H3C
H3C LS-5500-28C-PWR-SI-OVS User manual
H3C
H3C S5500-SI Series User manual
H3C
H3C S12500X-2L User manual
H3C
H3C S5120-SI Series User manual
H3C
H3C S7500 Series User manual
H3C
H3C S6800-2C-FC Operating and maintenance manual
H3C
H3C H3C S7500E Series User manual
H3C
H3C S6800 Series User manual
H3C
H3C S10500 Series Installation manual
H3C
H3C S5500-28C-EI User manual
